Learn · NPTEL

Course10110105840 lectures

Turbomachinery Aerodynamics

Prof. Bhaskar Roy and Prof. A M Pradeep · IIT Bombay

Start with lecture 1 At NPTEL

Lectures

Turbomachinery Aerodynamics

  1. L1-Introduction to Turbo machines Syllabus, References and Schedules Video
  2. L2-Axial Flow Compressors and Fans : Introduction to Compressor Aerothermodynamics Video
  3. L3-A two dimensional analytical model :Cascade Video
  4. L4-2D losses in Axial flow Compressor Stage : Primary losses Video
  5. L5-Tutorial 1 : Two Dimensional Axial Flow Compressors Video
  6. L6-3D Flows in Blade Passages, Secondary Flows, Tip leakage Flow, Scrubbling Video
  7. L7-Three Dimensional Flow Analysis : Radial Equilibrium Concept Video
  8. L8-Classical Blade Design Laws : Free Vortex and other Laws Video
  9. L9-Three Dimensional Flow Analysis in Axial Flow Compressor Video
  10. L10-Tutorial 2: Three Dimensional Axial Flow Compressors Video
  11. L11-Axial Compressor Characteristics: Single stage, Multi stage and Multi spool Characteristics Video
  12. L12-Instability in Axial Compressors Video
  13. L13-Inlet Distortion and Rotating Stall, Control of Instability Video
  14. L14-Transonic Compressors and Shock Structure Models, Transonic Compressor Characteristics Video
  15. L15-Axial Flow Compressor Design, Inter Spool Duct Video
  16. L16-Design of Compressor Blades, Aerofoil Design (Subsonic, Transonic, Supersonic Profiles ) Video
  17. L17-Design of Compressor Blade: 3D Blade Shapes of Rotors and Stators Video
  18. L18-Noise Problem in Axial Compressors and Fans Video
  19. L19-Axial Flow Turbines: Introduction to Turbines Aerothermodynamics Video
  20. L20-Axial Flow Turbines: Turbine Blade 2D (Cascade) Analysis Video
  21. L21-Axial Flow Turbines: Work done, Degree of Reaction, Losses and Efficiency Video
  22. L22-Axial Flow Turbines: Blade and Axial Flow Passages, Exit Flow Matching with Nozzle Video
  23. L23-Tutorial 3 : Axial Flow Turbines Video
  24. L24-Multi staging and Multi spooling of Turbine Video
  25. L25-3D Flow in Turbine: 3D Flow Theories, Free Vortex Theories etc. Video
  26. L26-Tutorial 4 : 3D Flows in Axial Flow Turbines Video
  27. L27-Turbine Blade Cooling - Fundamentals of Heat Transfer, Blade Cooling Requirements Video
  28. L28-Turbine Blade Cooling Technologies Video
  29. L29-Turbine Blade Design: Turbine Profiles, Aerofoil Data and Profile Construction Video
  30. L30-Turbine Blade Design: 3D Blade Shapes Video
  31. L31-Centrifugal Compressors: Thermodynamics and Aerodynamics Video
  32. L32-Centrifugal Compressors : Characteristics, Stall, Surge Problems Video
  33. L33-Tutorial 5 : Centrifugal Compressors Video
  34. L34-Design of Centrifugal Compressors: Impellers, Vane/Vane less Diffusers, Volutes Video
  35. L35-Radial Turbines: Thermodynamics and Aerodynamics Video
  36. L36-Tutorial 6 : Radial Turbines Video
  37. L37-Radial Turbine Characteristics and Design of Radial Turbines Video
  38. L38-CFD for Turbomachinery: Grid Generation, Boundary Conditions for Flow Analysis Video
  39. L39-CFD for Turbomachinery: Flow Track and Inter-spool Duct Design using CFD Video
  40. L40-CFD for Turbomachinery: 2D and 3D Blade Generation and Analysis Using CFD Video

Syllabus and materials

At NPTEL, as the course publishes them.

Credits and licence

Institution
IIT Bombay
Department
Aerospace Engineering
Taught by
Prof. Bhaskar Roy, Prof. A M Pradeep
Level
Undergraduate
Language
English
Subjects
Engineering
Source
NPTEL
Licence
CC BY-NC-SA, as NPTEL states it. Non-commercial use only. NPTEL's terms
Attribution
NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
Who can watch
NPTEL gives no rating. Invisible Network shows it to Tweens profiles and older, judged from what the source says about it. How courses are placed