Learn · Turbomachinery Aerodynamics

Lecture 27 of 40Turbomachinery Aerodynamics

L27-Turbine Blade Cooling - Fundamentals of Heat Transfer, Blade Cooling Requirements

Prof. Bhaskar Roy and Prof. A M Pradeep · IIT Bombay

Credits and licence

From
Turbomachinery Aerodynamics, IIT Bombay (at NPTEL)
Licence
CC BY-NC-SA, as NPTEL states it. Non-commercial use only.
Attribution
NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
Who can watch
Tweens profiles and older. How courses are placed

All the lectures

  1. L1-Introduction to Turbo machines Syllabus, References and Schedules Video
  2. L2-Axial Flow Compressors and Fans : Introduction to Compressor Aerothermodynamics Video
  3. L3-A two dimensional analytical model :Cascade Video
  4. L4-2D losses in Axial flow Compressor Stage : Primary losses Video
  5. L5-Tutorial 1 : Two Dimensional Axial Flow Compressors Video
  6. L6-3D Flows in Blade Passages, Secondary Flows, Tip leakage Flow, Scrubbling Video
  7. L7-Three Dimensional Flow Analysis : Radial Equilibrium Concept Video
  8. L8-Classical Blade Design Laws : Free Vortex and other Laws Video
  9. L9-Three Dimensional Flow Analysis in Axial Flow Compressor Video
  10. L10-Tutorial 2: Three Dimensional Axial Flow Compressors Video
  11. L11-Axial Compressor Characteristics: Single stage, Multi stage and Multi spool Characteristics Video
  12. L12-Instability in Axial Compressors Video
  13. L13-Inlet Distortion and Rotating Stall, Control of Instability Video
  14. L14-Transonic Compressors and Shock Structure Models, Transonic Compressor Characteristics Video
  15. L15-Axial Flow Compressor Design, Inter Spool Duct Video
  16. L16-Design of Compressor Blades, Aerofoil Design (Subsonic, Transonic, Supersonic Profiles ) Video
  17. L17-Design of Compressor Blade: 3D Blade Shapes of Rotors and Stators Video
  18. L18-Noise Problem in Axial Compressors and Fans Video
  19. L19-Axial Flow Turbines: Introduction to Turbines Aerothermodynamics Video
  20. L20-Axial Flow Turbines: Turbine Blade 2D (Cascade) Analysis Video
  21. L21-Axial Flow Turbines: Work done, Degree of Reaction, Losses and Efficiency Video
  22. L22-Axial Flow Turbines: Blade and Axial Flow Passages, Exit Flow Matching with Nozzle Video
  23. L23-Tutorial 3 : Axial Flow Turbines Video
  24. L24-Multi staging and Multi spooling of Turbine Video
  25. L25-3D Flow in Turbine: 3D Flow Theories, Free Vortex Theories etc. Video
  26. L26-Tutorial 4 : 3D Flows in Axial Flow Turbines Video
  27. L27-Turbine Blade Cooling - Fundamentals of Heat Transfer, Blade Cooling Requirements Video
  28. L28-Turbine Blade Cooling Technologies Video
  29. L29-Turbine Blade Design: Turbine Profiles, Aerofoil Data and Profile Construction Video
  30. L30-Turbine Blade Design: 3D Blade Shapes Video
  31. L31-Centrifugal Compressors: Thermodynamics and Aerodynamics Video
  32. L32-Centrifugal Compressors : Characteristics, Stall, Surge Problems Video
  33. L33-Tutorial 5 : Centrifugal Compressors Video
  34. L34-Design of Centrifugal Compressors: Impellers, Vane/Vane less Diffusers, Volutes Video
  35. L35-Radial Turbines: Thermodynamics and Aerodynamics Video
  36. L36-Tutorial 6 : Radial Turbines Video
  37. L37-Radial Turbine Characteristics and Design of Radial Turbines Video
  38. L38-CFD for Turbomachinery: Grid Generation, Boundary Conditions for Flow Analysis Video
  39. L39-CFD for Turbomachinery: Flow Track and Inter-spool Duct Design using CFD Video
  40. L40-CFD for Turbomachinery: 2D and 3D Blade Generation and Analysis Using CFD Video