Opening the book…
Physics deals with quantities spanning an extraordinary range of magnitudes. The age of the universe is roughly \(4 \times 10^{17}\) seconds; the Planck time (the scale below which our current theories of space and time are expected to break down, so that we do not know how to describe shorter intervals) is about \(1 \times 10^{-43}\) seconds. Writing such numbers in ordinary decimal form is impractical and error-prone. We therefore use scientific notation, expressing a quantity as a single nonzero digit before the decimal point, multiplied by a power of ten:
\[N = a \times 10^{n}, \qquad 1 \le |a| < 10,\ \ n \in \mathbb{Z}. \tag{1.2}\]
For example, \(530\,000\,000\,\mathrm{m} = 5.3 \times 10^{8}\,\mathrm{m}\), and \(0.000\,000\,042\,\mathrm{s} = 4.2 \times 10^{-8}\,\mathrm{s}\). Some characteristic values:
| Time interval (s) | Time interval (s) | ||
|---|---|---|---|
| Age of the universe | \(4 \times 10^{17}\) | Time between heartbeats | \(8 \times 10^{-1}\) |
| Age of the Great Pyramid | \(1 \times 10^{11}\) | Lifetime of the muon | \(2 \times 10^{-6}\) |
| Human life expectancy | \(2 \times 10^{9}\) | Shortest laser pulse made | \(4 \times 10^{-17}\) |
| Length of a day | \(9 \times 10^{4}\) | The Planck time | \(1 \times 10^{-43}\) |
The bottom of that range is a moving target. Laser pulses lasting only a few tens of attoseconds (\(10^{-17}\,\mathrm{s}\)) can now be produced (work recognized by the 2023 Nobel Prize in Physics), and the record continues to fall.
A table makes the numbers available, but it does not make them felt. Figure 1.1 plots the same quantities on a logarithmic axis, where each step to the right multiplies the interval by ten. Sixty decades separate the shortest interval we can speak about from the age of the universe, and every physical process you will ever study lives somewhere on this line.
SI prefixes
A second tool for handling extreme magnitudes is the use of SI prefixes, which scale a base unit by a power of ten:
| Factor | Prefix | Symbol | Factor | Prefix | Symbol |
|---|---|---|---|---|---|
| \(10^{30}\) | quetta- | Q | \(10^{-1}\) | deci- | d |
| \(10^{27}\) | ronna- | R | \(10^{-2}\) | centi- | c |
| \(10^{24}\) | yotta- | Y | \(10^{-3}\) | milli- | m |
| \(10^{21}\) | zetta- | Z | \(10^{-6}\) | micro- | \(\mu\) |
| \(10^{18}\) | exa- | E | \(10^{-9}\) | nano- | n |
| \(10^{15}\) | peta- | P | \(10^{-12}\) | pico- | p |
| \(10^{12}\) | tera- | T | \(10^{-15}\) | femto- | f |
| \(10^{9}\) | giga- | G | \(10^{-18}\) | atto- | a |
| \(10^{6}\) | mega- | M | \(10^{-21}\) | zepto- | z |
| \(10^{3}\) | kilo- | k | \(10^{-24}\) | yocto- | y |
| \(10^{2}\) | hecto- | h | \(10^{-27}\) | ronto- | r |
| \(10^{1}\) | deka- | da | \(10^{-30}\) | quecto- | q |
The four outermost entries (ronna, quetta, ronto, and quecto) were added to the SI only in 2022, largely because global data storage had begun to outgrow the old ceiling of yotta. The system is a living standard, not a finished one.
For example, \(530\,000\,000\,\mathrm{m} = 5.3 \times 10^{8}\,\mathrm{m} = 530 \times 10^{6}\,\mathrm{m} = 530\,\mathrm{Mm}\) (“530 megameters”). The prefixes you will encounter most often in this course are kilo-, centi-, milli-, micro-, and nano-; the others appear in specialized contexts.
Significant figures
When you report a measured or computed quantity, the number of digits you write should reflect how precisely you actually know it. The digits you can defend are called significant figures (or sig figs). A measurement of \(1.40\,\mathrm{m}\) implies precision to the nearest centimeter (three significant figures); writing it as \(1.4\,\mathrm{m}\) implies precision only to the nearest decimeter (two significant figures), and \(1.400\,\mathrm{m}\) to the nearest millimeter (four).
Counting significant figures. Three rules settle nearly every case:
- Every nonzero digit is significant. (\(4.51\) has three.)
- A zero between nonzero digits is significant. (\(4.05\) has three; \(1.0002\) has five.)
- A leading zero is never significant: it only locates the decimal point (\(0.0027\) has two, not four). A trailing zero is significant only when the number contains a decimal point (\(4.500\) has four; \(0.250\) has three).
That last rule leaves a genuine ambiguity. Written as \(1200\,\mathrm{s}\), a value could mean two, three, or four significant figures, and nothing on the page tells you which. Scientific notation removes the doubt: \(1.2 \times 10^{3}\), \(1.20 \times 10^{3}\), and \(1.200 \times 10^{3}\) say two, three, and four unambiguously. Whenever trailing zeros carry meaning, write the number in scientific notation.
Exact numbers impose no limit. The \(2\) in the circumference \(2\pi r\) is a fact of geometry, not a measurement. Defined conversion factors are exact by agreement: \(1\,\mathrm{in} = 2.54\,\mathrm{cm}\) and \(1\,\mathrm{min} = 60\,\mathrm{s}\) hold to as many digits as you care to write. Exact numbers never reduce the significant figures of a result, only measured quantities do.
Combining measurements. Two rules cover almost every situation in this book:
- Multiplication and division: the result has the same number of significant figures as the least precise input.
- Addition and subtraction: the result has the same number of decimal places as the least precise input.
For example, \((3.1\,\mathrm{m}) \times (3.8\,\mathrm{m}) = 11.78\,\mathrm{m^2}\), which we round to \(12\,\mathrm{m^2}\) (two significant figures, matching the inputs). Carrying more digits than the data support gives a false impression of precision.
Example 1.1: Applying both rules to one rectangle
A rectangular plot is measured as \(12.5\,\mathrm{m}\) long and \(4.2\,\mathrm{m}\) wide. Report its area and its perimeter with the appropriate number of significant figures.
Solution
Count first. \(12.5\) has three significant figures and is known to the nearest tenth of a meter; \(4.2\) has two significant figures and is also known to the nearest tenth.
Area. The area is a product, so the multiplication rule applies: the result may keep only as many significant figures as the less precise input, which is two.
\[A = (12.5\,\mathrm{m})(4.2\,\mathrm{m}) = 52.5\,\mathrm{m^2} \;\longrightarrow\; A = 53\,\mathrm{m^2}.\]
To keep two figures we keep the \(5\) and the \(2\) and look at the next digit, a \(5\); by the usual convention it rounds up, giving \(53\).
Perimeter. The perimeter is a sum, so the addition rule applies to the sum inside the parentheses:
\[P = 2(12.5\,\mathrm{m} + 4.2\,\mathrm{m}) = 2(16.7\,\mathrm{m}) = 33.4\,\mathrm{m}.\]
Both lengths are known to the nearest tenth of a meter, so their sum keeps one decimal place. The factor of \(2\) is exact (a rectangle has exactly two lengths and two widths), so it does not limit the result. The perimeter therefore keeps three significant figures.
Notice that the same two measurements support three significant figures in one result and only two in the other. The rules are not about the numbers themselves; they are about which operation you performed.
Note: Rounding, and a convention used throughout this book
Round only at the end of a calculation. Intermediate steps should carry every digit available to them, because rounding partway through a multi-step problem lets small errors accumulate and can shift the last digit of the final answer.
Your reported final answer, on the other hand, must carry exactly the number of significant figures the data support. That is the digit count a grader, a reader, or a collaborator will hold you to.
To keep the worked examples in this book readable, the values displayed in them are written to three significant figures for brevity, even where the arithmetic behind them carries more. When you report a final answer of your own, apply the rules above rather than copying the three-digit display.
Accuracy is not precision. Precision describes how finely a measurement is resolved and how repeatably an instrument returns the same value; accuracy describes how close that value lands to the truth. A scale that reads \(2.4983\,\mathrm{kg}\) every single time for a \(2.0000\,\mathrm{kg}\) standard is extremely precise and badly inaccurate: it needs calibration, not more digits. Significant figures communicate precision alone. They say nothing about whether the instrument was telling the truth.
Checkpoint 1.1
A digital scale reads \(2.50\,\mathrm{kg}\). A second scale, with finer resolution, reads \(2.4983\,\mathrm{kg}\). Which measurement has more significant figures? Are the two readings consistent?
Answers to Checkpoints
Checkpoint 1.1. The second reading, \(2.4983\,\mathrm{kg}\), has five significant figures; the first, \(2.50\,\mathrm{kg}\), has three. The two are consistent. The first scale resolves only to \(0.01\,\mathrm{kg}\), so its reading means “somewhere between \(2.495\) and \(2.505\,\mathrm{kg}\),” and \(2.4983\,\mathrm{kg}\) lies inside that range (it rounds to \(2.50\,\mathrm{kg}\)). The finer scale has not contradicted the coarser one; it has only narrowed down where in that range the mass lies.
This page titled 1.3: Scientific Notation and Significant Figures was last modified on Thu, 12 Nov 2026 04:26:52 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.