1.2: Measuring Standards

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    1.2: Measuring Standards

    Every measurement is fundamentally a comparison between the object being measured and an agreed-upon standard, called a unit. To say a hallway is “three meters long” is to say that its length contains three copies of the standard meter. Without a shared standard, the statement is meaningless: three of whose meters?

    Although many measurement systems have existed historically, the modern scientific standard is the International System of Units, abbreviated SI (from the French Système International d’Unités). Throughout this book we use SI units exclusively; U.S. customary units (feet, pounds, gallons) will appear only as quantities to be converted into SI. Be careful with the word “gallon”: the U.S. gallon and the imperial gallon still used in parts of the Commonwealth differ by about \(20\%\). Every gallon in this book is a U.S. gallon.

    The SI base units

    The SI system is built on seven base units, of which three are used pervasively in introductory mechanics:

    The three SI base units used most in mechanics
    Quantity SI unit Symbol
    Length meter m
    Mass kilogram kg
    Time second s

    The remaining four base units (electric current: ampere, A; temperature: kelvin, K; amount of substance: mole, mol; and luminous intensity: candela, cd) will appear in later chapters as needed.

    Definitions of the base units

    Since 2019, all SI base units have been defined in terms of fixed numerical values of fundamental physical constants of nature. This represents a major shift from earlier definitions, which depended on physical artifacts (like a particular metal bar held in a vault) or specific material properties that could be lost, damaged, or drift over time. The modern definitions are reproducible in any properly equipped laboratory anywhere in the universe.

    The second (s). The second is defined by fixing the numerical value of a particular atomic transition frequency in cesium-133. In the ground state of a cesium atom, the outermost electron can sit in either of two slightly different energy levels, depending on how its magnetic orientation lines up with that of the nucleus: this pair of closely spaced levels is called a hyperfine splitting. Flipping between them absorbs or emits microwave radiation at one fixed frequency. (“Unperturbed” simply means the atom is shielded from stray electric and magnetic fields that would shift this frequency slightly.) That frequency is defined to be exactly

    \[\Delta\nu_{\mathrm{Cs}} = 9\,192\,631\,770\,\mathrm{Hz}.\]

    One second is therefore the duration of exactly \(9\,192\,631\,770\) cycles of this radiation. Atomic clocks built around this transition are the most precise timekeepers ever constructed, drifting by less than a second over hundreds of millions of years.

    The meter (m). The meter is defined by fixing the numerical value of the speed of light in vacuum to be exactly

    \[c = 299\,792\,458\,\mathrm{m/s}.\]

    One meter is the distance light travels in vacuum during a time interval of \(1/299\,792\,458\) of a second. Because the second is already defined via cesium, this fixes the meter as well. Note the consequence: we no longer measure the speed of light; we define it. Any future improvement in our ability to compare light travel times does not sharpen our value of \(c\), which is now exact by definition; instead it lets a laboratory build a better physical embodiment of the meter itself. (Metrologists call such a physical embodiment a realization of the unit.)

    The kilogram (kg). The kilogram is defined by fixing the numerical value of the Planck constant to be exactly

    \[h = 6.626\,070\,15 \times 10^{-34}\,\mathrm{J \cdot s}.\]

    Because \(1\,\mathrm{J \cdot s} = 1\,\mathrm{kg \cdot m^2 / s}\), and the meter and second are already defined, this fixes the kilogram. This 2019 redefinition retired the last physical-artifact standard: the International Prototype of the Kilogram, a platinum–iridium cylinder held in a vault near Paris that had served as the world’s mass standard since 1889.

    Note: Where the meter came from

    The meter began in 1791, when the French Academy of Sciences defined it as one ten-millionth of the distance from the North Pole to the equator, measured along the meridian through Paris. Two astronomers, Jean-Baptiste Delambre and Pierre Méchain, spent 1792 to 1798 surveying the stretch of that meridian between Dunkirk and Barcelona, and in 1799 the result was cast as a platinum bar. The survey was a remarkable achievement, but the Earth’s shape was not known well enough at the time, and the bar came out about \(0.2\,\mathrm{mm}\) short of its intended length. That is why the Earth’s circumference is roughly, but not exactly, \(40\,000\,\mathrm{km}\).

    In 1889 the standard became the International Prototype Meter, a platinum–iridium bar whose length was the distance between two fine lines engraved on it, measured at the melting point of ice. It was an artifact standard, with the same weaknesses as the kilogram cylinder. In 1960 the meter was redefined as \(1\,650\,763.73\) wavelengths of an orange-red spectral line of krypton-86: the first atomic definition, which any laboratory could reproduce. In 1983 it took its present form, tied to the speed of light.

    Notice what stayed fixed through every change. Each new definition was chosen to agree with the old meter as closely as it could then be measured, so the length of a meter never jumped; only the precision with which it could be realized improved. The other base units followed the same path. The second began as \(1/86\,400\) of a mean solar day, but the Earth’s rotation is not perfectly steady (it is gradually slowing), so in 1967 the second was tied to cesium. The kilogram began as the mass of one liter of water, became a platinum cylinder in 1799 and the platinum–iridium prototype in 1889, and was tied to the Planck constant in 2019.

    Derived units

    Most physical quantities you will encounter (velocity, force, energy, pressure) are not base quantities. They are derived: each has a unit built out of products and ratios of the base units. For example, the unit of force is the newton, defined as

    \[1\,\mathrm{N} = 1\,\frac{\mathrm{kg}\cdot\mathrm{m}}{\mathrm{s}^2}. \tag{1.1}\]

    A newton is the force required to accelerate a \(1\,\mathrm{kg}\) mass at \(1\,\mathrm{m/s^2}\). We will derive this expression from Newton’s second law in Chapter 5.


    This page titled 1.2: Measuring Standards was last modified on Thu, 12 Nov 2026 04:26:52 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.