31.5: Total Internal Reflection

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    31.5: Total Internal Reflection
    Ray diagram of total internal reflection at a water-to-air interface.
    Figure 31.5. Total internal reflection. Below the critical angle (green) light refracts out into the faster medium. At \(\theta_c\) (gold) the refracted ray grazes the surface at \(90^{\circ}\). Beyond \(\theta_c\) (red) no light escapes: it is entirely reflected back.
    Figure descriptionA ray diagram at a horizontal water-to-air interface, with the denser water n sub 1 below and air n sub 2 above, and a dashed vertical normal. Three rays travel up through the water to the same point on the surface at increasing angles from the normal. The green ray, at the smallest angle, refracts out into the air. The gold ray arrives at the critical angle theta sub c, marked with an arc, and its refracted ray grazes along the surface at 90 degrees. The red ray, at a larger angle still, has no refracted ray at all -- it reflects entirely back down into the water, labeled total reflection.

    Something dramatic happens when light tries to leave a slower medium for a faster one: say, water for air, or glass for air. Going from high \(n_1\) to low \(n_2\), Snell’s law bends the refracted ray away from the normal, so \(\theta_2 > \theta_1\). As you increase the angle of incidence, the refracted ray swings closer and closer to the surface until, at one special incidence angle, it grazes along the boundary at exactly \(\theta_2 = 90^{\circ}\). Beyond that angle there is no refracted ray at all: the light is completely reflected back into the original medium. This is total internal reflection, and the threshold angle is the critical angle \(\theta_c\) (Figure 31.5).

    Set \(\theta_2 = 90^{\circ}\) in Snell’s law: \(n_1\sin\theta_c = n_2\sin 90^{\circ} = n_2\), so

    Key Equation: Critical angle

    \[\theta_c = \arcsin\frac{n_2}{n_1}, \qquad (n_1 > n_2). \tag{31.7}\]

    Total internal reflection only occurs when light is in the denser medium (\(n_1 > n_2\)); otherwise the ratio \(n_2/n_1\) exceeds \(1\) and the arcsine has no solution. Far from a curiosity, this is the principle that traps a light pulse inside an optical fiber, bouncing it down hundreds of kilometers of glass to carry the internet, and it is what makes a cut diamond flash: light entering the gem is repeatedly trapped and reflected by its facets before escaping toward your eye.

    Example 31.5: Critical angle for water

    Find the critical angle for an air–water boundary. (Take the index of refraction of water to be \(1.33\).)

    Solution

    The light is inside the water (the denser medium), so \(n_1 = 1.33\) and the second medium is air, \(n_2 = 1.00\). Equation (31.7) gives

    \[\theta_c = \arcsin\frac{n_2}{n_1} = \arcsin\frac{1.00}{1.33} = \arcsin(0.752) = \boxed{48.8^{\circ}}.\]

    Any ray striking the underside of the water’s surface at more than \(48.8^{\circ}\) from the normal cannot get out: it is reflected back down. This is why, looking up from underwater, the bright world above is squeezed into a circular “window” directly overhead, ringed by a mirror-like surface reflecting the bottom.

    Checkpoint 31.5

    Diamond (\(n = 2.42\)) has a much smaller critical angle than glass (\(n = 1.52\)). Without computing, predict which gemstone traps light through more internal bounces before it escapes, and explain why this contributes to a diamond’s brilliance.

    Answer

    Answers to Checkpoints

    Checkpoint 31.5. Diamond. A smaller critical angle (\(24^\circ\) for diamond, about \(41^\circ\) for glass) means a larger range of angles at which light striking the inside of a facet is totally reflected. Light entering a well-cut diamond bounces around inside several times before it meets a facet nearly head-on enough to escape, and it tends to leave through the top toward the viewer. This makes the stone sparkle, and the long path also spreads the colors apart, adding the “fire.”


    This page titled 31.5: Total Internal Reflection was last modified on Thu, 12 Nov 2026 04:26:55 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.