19.2: Energy Stored in an Electric Field

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    19.2: Energy Stored in an Electric Field

    Charging a capacitor takes work, because each bit of charge moved from one plate to the other must be pushed against the field that the charge already there has built up. That work is stored as electric potential energy, and it can be recovered, which is what the camera flash and the defibrillator do.

    Suppose that partway through the charging, the plates carry charge \(q\), so the potential difference between them is \(v = q/C\). Moving a further small charge \(dq\) from the negative plate to the positive plate raises its potential energy by \(dU = v\,dq = (q/C)\,dq\). Adding up the work from \(q = 0\) to the final charge \(Q\),

    \[U = \int_0^Q \frac{q}{C}\,dq = \frac{Q^2}{2C}.\]

    Using \(Q = CV\), the energy stored in a capacitor can be written in three equivalent ways:

    Graph of a capacitor's potential difference against its charge; the area is the stored energy.
    Figure 19.3. The energy stored in a capacitor is the area under the graph of potential difference against charge. Moving charge \(dq\) at potential difference \(v\) takes work \(v\,dq\) (the red strip); the total is the triangle, \(\tfrac12 QV\).
    Figure descriptionA graph of the capacitor's potential difference v, on the vertical axis, against the charge q on its plates, on the horizontal axis. The graph is a straight line through the origin with slope one over C, reaching V at the final charge Q. The triangle under the line is shaded, and its area, one half Q V, is the stored energy. A thin vertical strip of width d q under the line at charge q represents the small amount of work v d q done to move the next bit of charge.
    Key Equation: Energy stored in a capacitor

    \[U = \frac{Q^2}{2C} = \tfrac12 CV^2 = \tfrac12 QV. \tag{19.5}\]

    Why \(\tfrac12 QV\) and not \(QV\)? Because the charge was not all moved through the final potential difference \(V\). The first bit of charge was moved through almost no potential difference at all, and the last bit through the full \(V\). On average, the charge was moved through \(V/2\). On a graph of \(v\) against \(q\), the stored energy is the area of the triangle under the straight line (Figure 19.3), just as the work done stretching a spring was the area under a graph of force against stretch in Chapter 7.

    The energy is in the field. Where is this energy? Apply equation (19.5) to a parallel-plate capacitor, with \(C = \epsilon_0A/d\) and \(V = Ed\):

    \[U = \tfrac12\left(\frac{\epsilon_0 A}{d}\right)(Ed)^2 = \tfrac12\epsilon_0E^2\,(Ad).\]

    The product \(Ad\) is the volume of the space between the plates, where the field is. The energy per unit volume, the energy density of the field, is therefore

    Key Equation: Energy density of an electric field

    \[u_E = \tfrac12\epsilon_0E^2. \tag{19.6}\]

    Although we derived it for the uniform field of a parallel-plate capacitor, equation (19.6) holds for any electric field in vacuum. It invites a change of viewpoint: the energy of a charged capacitor is not stored “in the charges” but in the field between them, wherever that field is. The viewpoint becomes unavoidable in Chapter 27, where electromagnetic waves carry energy across empty space, far from any charge, in their electric and magnetic fields.

    Example 19.3: A camera flash and a defibrillator

    (a) A camera flash unit charges a \(150\,\mathrm{\mu F}\) capacitor to \(300\,\mathrm{V}\). How much energy does it store, and what average power does the flash deliver if the energy is released in \(1.0\,\mathrm{ms}\)? (b) A defibrillator must deliver \(200\,\mathrm{J}\) from a capacitor charged to \(5.0\,\mathrm{kV}\). What capacitance does it need, and how much charge passes through the patient?

    Solution

    (a) From equation (19.5),

    \[U = \tfrac12 CV^2 = \tfrac12(150\times10^{-6})(300)^2 = \boxed{6.8\,\mathrm{J}},\]

    and the average power is \(P = U/t = 6.8/(1.0\times10^{-3}) = \boxed{6.8\,\mathrm{kW}}\). The batteries charging the capacitor supply energy slowly, over a second or two; the capacitor delivers it a thousand times faster.

    (b) Solving \(U = \tfrac12 CV^2\) for \(C\),

    \[C = \frac{2U}{V^2} = \frac{2(200)}{(5.0\times10^{3})^2} = \boxed{16\,\mathrm{\mu F}},\]

    and the charge is \(Q = CV = (16\times10^{-6})(5.0\times10^{3}) = \boxed{0.080\,\mathrm{C}}\).

    Example 19.4: Energy density near a thundercloud

    Find the energy density of the electric field (a) near the ground on a fair day, \(E = 150\,\mathrm{V/m}\); and (b) in air just about to break down, \(E = 3.0\times 10^{6}\,\mathrm{V/m}\). (c) Estimate the energy stored in the field between a thundercloud and the ground, if the field of case (b) fills a region \(1\,\mathrm{km}\) high and \(2\,\mathrm{km}\) across.

    Solution

    (a) \(u_E = \tfrac12\epsilon_0E^2 = \tfrac12(8.85\times10^{-12})(150)^2 = \boxed{1.0\times 10^{-7}\,\mathrm{J/m^3}}\).

    (b) \(u_E = \tfrac12(8.85\times10^{-12})(3.0\times10^{6})^2 = \boxed{40\,\mathrm{J/m^3}}\).

    (c) The volume is roughly \((1000\,\mathrm{m})(2000\,\mathrm{m})^2 = 4\times 10^{9}\,\mathrm{m^3}\), so \(U \approx (40)(4\times10^{9}) \approx \boxed{2\times 10^{11}\,\mathrm{J}}\), the energy of some forty tons of TNT. In reality the field is strong only in parts of this region, and a single lightning stroke releases about \(10^9\) joules. But the estimate shows why a thunderstorm is one of the most energetic events in the atmosphere.

    Example 19.5: Pulling the plates apart

    A parallel-plate capacitor of capacitance \(C_0\) is charged to potential difference \(V_0\) and then disconnected from the battery. The plates are then pulled apart to twice their original separation. Find the new charge, potential difference, and stored energy, and account for the change in energy.

    Solution

    Disconnected, the capacitor keeps its charge: \(Q = Q_0 = C_0V_0\). Doubling \(d\) halves the capacitance, \(C = C_0/2\), so the potential difference doubles, \(V = Q/C = 2V_0\). The field \(E = Q/\epsilon_0A\) is unchanged, since the charge on each plate is. The stored energy is

    \[U = \frac{Q^2}{2C} = \frac{Q_0^2}{2(C_0/2)} = 2U_0.\]

    The energy has doubled. The same field now fills twice the volume, so equation (19.6) gives twice the energy too. The extra energy came from the work you did pulling the plates apart against their mutual attraction: opposite charges attract, and separating them takes work.

    Checkpoint 19.2

    Repeat Example 19.5, but with the battery still connected while the plates are pulled apart. (a) What happens to \(V\), \(C\), \(Q\), and \(U\)? (b) The stored energy now decreases, even though you still do positive work pulling the plates apart. Where does the energy go? (Hint: what happens to the charge that leaves the plates?)

    Answer

    Answers to Checkpoints

    Checkpoint 19.2. (a) \(V\) stays fixed (the battery sets it); \(C\) halves; \(Q = CV\) halves; and \(U = \tfrac{1}{2}CV^2\) halves. (b) The charge driven off the plates is pushed back into the battery against its emf, which recharges the battery. The energy the battery gains equals your mechanical work plus the energy released by the capacitor’s field. Nothing is lost: energy is transferred from you and from the field into the battery.


    This page titled 19.2: Energy Stored in an Electric Field was last modified on Thu, 12 Nov 2026 04:26:46 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.