Opening the book…
A capacitor is any pair of conductors separated by an insulator or by empty space. To charge it, electrons are moved from one conductor to the other, typically by connecting the two to the terminals of a battery. One conductor ends up with charge \(+Q\) and the other with \(-Q\); we call \(Q\) the charge on the capacitor, even though its net charge is zero. The separated charges produce a field between the conductors and so a potential difference \(\Delta V\) between them. Because every field in electrostatics is proportional to the charges producing it, \(\Delta V\) is proportional to \(Q\). Double the charge and the field doubles everywhere, and so does the potential difference. The constant of proportionality is the capacitance:
Key Equation: Capacitance
\[C = \frac{Q}{\Delta V}. \tag{19.1}\]
Capacitance measures how much charge the capacitor holds per volt. It is always positive, and it depends only on the shapes, sizes, and arrangement of the conductors and on the material between them, not on \(Q\) or \(\Delta V\). For a capacitor, we will usually write the potential difference simply as \(V\), so that \(Q = CV\).
The SI unit of capacitance is the farad (F), after Michael Faraday: \(1\,\mathrm{F} = 1\,\mathrm{C/V}\). As we will see, a farad is an enormous capacitance. Capacitors in electronic circuits typically range from picofarads (\(1\,\mathrm{pF} = 10^{-12}\,\mathrm{F}\)) to microfarads (\(1\,\mathrm{\mu F} = 10^{-6}\,\mathrm{F}\)).
The parallel-plate capacitor. The simplest and most important capacitor is a pair of parallel conducting plates, each of area \(A\), a distance \(d\) apart (Figure 19.1). With charges \(\pm Q\), each plate has surface charge density \(\sigma = Q/A\) on its inner face. If the plates are large compared with their separation, the field between them is uniform and equal to \(\sigma/\epsilon_0\) (equation (16.14)), so
\[E = \frac{Q}{\epsilon_0 A}, \qquad V = Ed = \frac{Qd}{\epsilon_0 A},\]
and the capacitance is
Key Equation: Parallel-plate capacitor
\[C = \frac{\epsilon_0 A}{d}. \tag{19.2}\]
Larger plates hold more charge at a given voltage, and closer plates do too, because a given voltage then produces a stronger field. This result also gives \(\epsilon_0\) a convenient unit: since \(C = \epsilon_0A/d\), \(\epsilon_0 = 8.85\times 10^{-12}\,\mathrm{F/m}\), the same thing as \(\,\mathrm{C^2/(N\cdot m^2)}\).
Charging a capacitor with a battery. A battery maintains a fixed potential difference between its terminals (Chapter 21). Connected to an uncharged capacitor, it pulls electrons off the plate attached to its positive terminal and pushes them onto the plate attached to its negative terminal. As the charge builds up, so does the capacitor’s own potential difference, and the flow stops when the two are equal. The capacitor then holds charge \(Q = CV\), where \(V\) is the battery’s voltage. If the battery is disconnected, the charge has nowhere to go and stays on the plates.
Example 19.1: How big is a farad?
(a) Find the capacitance of two square plates, \(10.0\,\mathrm{cm}\) on a side, \(1.00\,\mathrm{mm}\) apart in air. (b) How much charge does this capacitor hold when connected to a \(12.0\,\mathrm{V}\) battery? (c) How large would the plates of a \(1.00\,\mathrm{F}\) capacitor with the same spacing have to be?
Solution
(a) From equation (19.2),
\[C = \frac{\epsilon_0 A}{d} = \frac{(8.85\times10^{-12})(0.100)^2}{1.00\times10^{-3}} = \boxed{8.85\times 10^{-11}\,\mathrm{F}} = 88.5\,\mathrm{pF}.\]
(b) \(Q = CV = (8.85\times10^{-11})(12.0) = \boxed{1.06\times 10^{-9}\,\mathrm{C}}\), about a nanocoulomb.
(c) Solving for \(A\) with \(C = 1.00\,\mathrm{F}\),
\[A = \frac{Cd}{\epsilon_0} = \frac{(1.00)(1.00\times10^{-3})}{8.85\times10^{-12}} = \boxed{1.13\times 10^{8}\,\mathrm{m^2}},\]
a square more than ten kilometers on a side. A farad is a huge capacitance. The “supercapacitors” now sold with capacitances of many farads get there by using a separation measured in nanometers and an effective plate area of thousands of square meters per gram of porous carbon.
The cylindrical capacitor. A coaxial cable is a capacitor: a central wire of radius \(a\) surrounded by a conducting cylinder of radius \(b\) (Figure 19.2a). Give the inner conductor charge \(+Q\) and the outer \(-Q\), spread over a length \(L\) so that \(\lambda = Q/L\). Between them the field is that of a line of charge, and Chapter 18 found the potential difference, equation (18.15): \(V = (\lambda/2\pi\epsilon_0)\ln(b/a)\), with the inner conductor higher. Then \(C = Q/V = \lambda L/V\), or
Key Equation: Cylindrical capacitor
\[C = \frac{2\pi\epsilon_0 L}{\ln(b/a)}. \tag{19.3}\]
Once again the capacitance depends only on geometry. The capacitance per unit length, \(C/L\), is an important specification of any coaxial cable.
The spherical capacitor. Two concentric conducting spheres of radii \(a\) and \(b > a\) carry charges \(+Q\) and \(-Q\) (Figure 19.2b). Between them the field is that of a point charge, \(k_eQ/r^2\), so the potential difference is
\[V = \int_a^b \frac{k_eQ}{r^2}\,dr = k_eQ\left(\frac{1}{a} - \frac{1}{b}\right) = k_eQ\,\frac{b - a}{ab},\]
and
Key Equation: Spherical capacitor
\[C = \frac{ab}{k_e(b - a)} = 4\pi\epsilon_0\frac{ab}{b - a}. \tag{19.4}\]
Let the outer sphere grow without limit, \(b \to \infty\). Then \(b/(b - a) \to 1\), and the capacitance approaches \(C = 4\pi\epsilon_0 a\). This is the capacitance of an isolated sphere, whose “other plate” is effectively at infinity: charge \(Q\) on it raises it to potential \(V = k_eQ/a\), so \(C = Q/V = a/k_e\).
Example 19.2: The capacitance of a coaxial cable and of the Earth
(a) A coaxial cable has an inner wire of radius \(0.50\,\mathrm{mm}\) and an outer conductor of radius \(3.0\,\mathrm{mm}\), with air between them. Find its capacitance per meter. (b) Treating the Earth as an isolated conducting sphere of radius \(6.37\times 10^{6}\,\mathrm{m}\), find its capacitance.
Solution
(a) From equation (19.3),
\[\frac{C}{L} = \frac{2\pi\epsilon_0}{\ln(b/a)} = \frac{2\pi(8.85\times10^{-12})}{\ln 6.0} = \boxed{3.1\times 10^{-11}\,\mathrm{F/m}} = 31\,\mathrm{pF/m}.\]
Real coaxial cables, filled with plastic rather than air, have two or three times more, around \(70\)–\(100\,\mathrm{pF/m}\), for a reason Section 19.3 explains.
(b) For an isolated sphere,
\[C = 4\pi\epsilon_0 R = 4\pi(8.85\times10^{-12})(6.37\times10^{6}) = \boxed{7.1\times 10^{-4}\,\mathrm{F}} = 710\,\mathrm{\mu F}.\]
The whole planet has less capacitance than a single electrolytic capacitor from an electronics catalog. Capacitance grows only in proportion to size, while bringing two conductors close together, as a capacitor does, pays off far more.
Checkpoint 19.1
A parallel-plate capacitor is connected to a battery. Without disconnecting the battery, you pull the plates apart to twice their original separation. (a) What happens to the capacitance? (b) To the potential difference? (c) To the charge on the plates? (d) Where does the charge go?
Answers to Checkpoints
Checkpoint 19.1. (a) \(C = \epsilon_0A/d\), so doubling \(d\) halves the capacitance. (b) The potential difference stays the same: the battery holds it fixed as long as it is connected. (c) With \(Q = CV\), halving \(C\) at fixed \(V\) halves the charge. (d) The charge that leaves flows back through the wires into the battery, against the battery’s emf.
This page titled 19.1: Capacitance was last modified on Thu, 12 Nov 2026 04:26:46 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.