30.4: Intensity and Decibels

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    30.4: Intensity and Decibels

    The loudness of a sound is governed by its intensity \(I\), the power the wave delivers per unit area of surface facing it:

    \[I = \frac{P}{A}. \tag{30.6}\]

    A source that radiates power \(P\) uniformly in all directions spreads it over the surface of an expanding sphere of area \(4\pi r^2\), so at distance \(r\) the intensity is

    Key Equation: Intensity from a point source

    \[I = \frac{P}{4\pi r^2}. \tag{30.7}\]

    A point source at the left radiating power P, with straight rays fanning out to the right.
    Figure 30.3. The inverse-square law. A point source radiates its power \(P\) over an expanding sphere of area \(4\pi r^2\), so the intensity falls as \(1/r^2\): at twice the distance the intensity is one-fourth, at three times the distance one-ninth.
    Figure descriptionA point source at the left radiating power P, with straight rays fanning out to the right. Three arcs cross the rays at increasing distances r, 2 r and 3 r. The nearest arc is labeled intensity I, the middle one I over 4, and the farthest I over 9 -- the same power spread over an area that grows as the square of the distance.

    This is an inverse-square law: double your distance from the source and the intensity drops to a quarter, because the same power is spread over four times the area (Figure 30.3). The relation also lets us compare two distances directly, \(I_2/I_1 = (r_1/r_2)^2\), which is often the quickest route in a problem.

    The human ear, however, does not perceive loudness in proportion to intensity. It responds roughly logarithmically: each multiplication of the intensity by ten is heard as the same step up in loudness. To match this, we measure sound on the decibel scale. The sound intensity level \(\beta\), in decibels (dB), is

    Key Equation: Sound intensity level

    \[\beta = (10\ \text{dB})\log\!\left(\frac{I}{I_0}\right), \qquad I_0 = 10^{-12}\,\mathrm{W/m^2}, \tag{30.8}\]

    where the logarithm is base ten (not the natural log) and \(I_0\) is the reference intensity, the faintest sound a healthy ear can detect, taken as \(0\) dB. The scale’s logarithmic nature has a tidy consequence: multiplying the intensity by \(10\) adds exactly \(10\) dB, and multiplying it by \(2\) adds about \(3\) dB. So a \(60\,\mathrm{dB}\) conversation is not “twice” a \(30\,\mathrm{dB}\) whisper but a thousand times more intense.

    Example 30.2: Intensity of a point source

    A point source emits sound waves with an average power output of \(80.0\,\mathrm{W}\).

    1. Find the intensity \(3.00\,\mathrm{m}\) from the source.
    2. At what distance is the intensity \(1.00\times 10^{-8}\,\mathrm{W/m^2}\)?
    Solution

    (a) Using equation (30.7) with \(r = 3.00\,\mathrm{m}\),

    \[I = \frac{P}{4\pi r^2} = \frac{80.0\,\mathrm{W}}{4\pi(3.00\,\mathrm{m})^2} \approx \boxed{0.707\,\mathrm{W/m^2}}.\]

    (b) Solving the same relation for \(r\),

    \[r = \sqrt{\frac{P}{4\pi I}} = \sqrt{\frac{80.0\,\mathrm{W}}{4\pi(1.00\times10^{-8}\,\mathrm{W/m^2})}} \approx 2.52\times10^4\,\mathrm{m} = \boxed{25.2\,\mathrm{km}}.\]

    Sound spreads thin remarkably fast: the intensity has fallen by eight orders of magnitude over \(25\,\mathrm{km}\), just as the inverse-square law demands.

    Example 30.3: Two machines and the decibel scale

    The intensity of sound delivered by a single operating machine at a worker’s location is \(2.0\times 10^{-7}\,\mathrm{W/m^2}\).

    1. Find the sound level in decibels when one machine runs.
    2. Find the sound level when a second, identical machine runs alongside it.
    Solution

    (a) With \(I = 2.0\times 10^{-7}\,\mathrm{W/m^2}\) and \(I_0 = 10^{-12}\,\mathrm{W/m^2}\),

    \[\beta_1 = (10)\log\!\left(\frac{2.0\times10^{-7}}{1.0\times10^{-12}}\right) = (10)\log(2.0\times10^{5}) \approx \boxed{53\,\mathrm{dB}}.\]

    (b) Two machines deliver twice the intensity, \(I = 4.0\times 10^{-7}\,\mathrm{W/m^2}\), so

    \[\beta_2 = (10)\log\!\left(\frac{4.0\times10^{-7}}{1.0\times10^{-12}}\right) = (10)\log(4.0\times10^{5}) \approx \boxed{56\,\mathrm{dB}}.\]

    Doubling the intensity raised the level by only about \(3\) dB, not by a factor of two: the logarithm at work, and the reason a second machine sounds only slightly louder than one.

    Checkpoint 30.3

    (a) A sound’s intensity increases by a factor of \(100\). By how many decibels does its level rise? (b) How many times more intense is a \(90\,\mathrm{dB}\) concert than a \(60\,\mathrm{dB}\) conversation? (c) You move three times farther from a small source. By about how many decibels does the level drop?

    Answer

    Answers to Checkpoints

    Checkpoint 30.3. (a) The level changes by \(10\log_{10}(I_2/I_1) = 10\log_{10}100 = 10(2) = 20\,\mathrm{dB}\). (b) A difference of \(30\,\mathrm{dB}\) means \(10\log_{10}(I_2/I_1) = 30\), so \(I_2/I_1 = 10^3 = 1000\): the concert is a thousand times more intense. (c) For a point source \(I \propto 1/r^2\), so tripling the distance divides the intensity by \(9\). The level drops by \(10\log_{10}9 \approx 9.5\,\mathrm{dB}\).


    This page titled 30.4: Intensity and Decibels was last modified on Thu, 12 Nov 2026 04:27:21 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.