30.3: Wave Interference

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    30.3: Wave Interference

    When two sound waves overlap, they obey the superposition principle of Chapter 29: the pressure variations add. Whether the result is loud or quiet at a given point depends on the phase difference between the two waves when they arrive, and for two sources emitting in step, that phase difference is set by the difference in the distances the waves have traveled, the path-length difference

    \[\Delta r = |r_2 - r_1|,\]

    where \(r_1\) and \(r_2\) are the distances from the two sources to the listener (Figure 30.2a). The two waves leave their sources in step, but the wave with the longer path has to cover the extra distance \(\Delta r\), so it arrives having gone through extra cycles. What matters is how many wavelengths fit into that extra distance (Figure 30.2b). This idea returns for light in Chapters 33 and 34, where it decides which places on a screen are bright and which are dark.

    Two panels: two in-phase speakers and a listener, showing the path-length difference.
    Figure 30.2. Path-length difference. (a) Two speakers driven in phase send the same tone to a listener at \(P\), along paths of lengths \(r_1\) and \(r_2\). (b) The same two paths straightened out and lined up so that both end at \(P\). The waves leave their speakers in step, so what they are doing when they reach \(P\) depends only on the extra distance \(\Delta r\) that the second wave covers. When \(\Delta r\) is a whole wavelength (top), the waves arrive in step, crest with crest, and reinforce. When \(\Delta r\) is half a wavelength (bottom), a crest arrives with a trough, and they cancel.
    Figure descriptionTwo panels about path-length difference. Panel a: two loudspeakers, S sub 1 and S sub 2, one above the other at the left, and a listener P up and to the right. A straight line from S sub 1 to P is labeled r sub 1; a longer line from S sub 2 to P is labeled r sub 2. Text below reads delta r equals r sub 2 minus r sub 1. Panel b: the two paths straightened out and lined up so that both end at P, marked by a vertical dashed line at the right. Each path carries a sine wave that starts at its speaker. In the top pair the lower path is longer by one wavelength, marked with a bracket labeled delta r equals lambda, and at P both waves are at a crest: crest meets crest, loud. In the bottom pair the lower path is longer by half a wavelength, bracket labeled delta r equals lambda over 2, and at P the upper wave is at a crest while the lower wave is at a trough: crest meets trough, quiet.

    A path-length difference of one whole wavelength puts the waves back in step, so the conditions are:

    Key Equation: Interference from a path difference

    \begin{align}\text{constructive (loud):}&\quad \Delta r = m\lambda, \tag{30.4} \\ \text{destructive (quiet):}&\quad \Delta r = \left(m + \tfrac12\right)\lambda, \tag{30.5}\end{align}

    with \(m = 0, 1, 2, \dots\). If the two paths differ by a whole number of wavelengths the crests arrive together and reinforce; if they differ by a half-integer number, a crest from one meets a trough from the other and they cancel.

    Example 30.1: Interference in a tunable sound path

    Sound from a speaker divides into two equal parts that travel separate paths and recombine at a receiver; one path length can be varied by sliding a section, like a trombone slide. The speed of sound is \(343\,\mathrm{m/s}\) and the speaker frequency is \(536\,\mathrm{Hz}\).

    1. Starting from a position of constructive interference, by what minimum distance must the slider be moved to produce destructive interference instead?
    2. What minimum slider displacement (from the original position) restores constructive interference?
    Solution

    The wavelength of the sound is

    \[\lambda = \frac{v}{f} = \frac{343\,\mathrm{m/s}}{536\,\mathrm{Hz}} = 0.640\,\mathrm{m}.\]

    Moving the slider by a distance \(d\) lengthens that branch of the path on both the outgoing and returning legs, so the path-length difference changes by \(\Delta r = 2d\).

    (a) To go from constructive to destructive interference the path difference must change by half a wavelength, \(2d = \lambda/2\), so

    \[d = \frac{\lambda}{4} = \frac{0.640\,\mathrm{m}}{4} \approx \boxed{0.160\,\mathrm{m}}.\]

    (b) To return to constructive interference the path difference must change by a full wavelength, \(2d = \lambda\), so

    \[d = \frac{\lambda}{2} = \frac{0.640\,\mathrm{m}}{2} \approx \boxed{0.320\,\mathrm{m}}.\]

    The factor of two (because the slider adds to the path twice) is the easy step to overlook here.

    Checkpoint 30.2

    Two loudspeakers driven in phase emit the same tone, of wavelength \(1.0\,\mathrm{m}\). (a) You stand \(3.0\,\mathrm{m}\) from one speaker and \(4.5\,\mathrm{m}\) from the other. Is the sound loud or quiet there? (b) You move to a spot \(3.0\,\mathrm{m}\) from one and \(5.0\,\mathrm{m}\) from the other. Loud or quiet?

    Answer

    Answers to Checkpoints

    Checkpoint 30.2. (a) The path difference is \(4.5 - 3.0 = 1.5\,\mathrm{m} = 1.5\lambda\), a whole number plus one half, so the waves arrive half a cycle out of step: destructive interference, a quiet spot. (b) Now the path difference is \(2.0\,\mathrm{m} = 2\lambda\), a whole number of wavelengths, so the waves arrive in step: constructive interference, a loud spot.


    This page titled 30.3: Wave Interference was last modified on Thu, 12 Nov 2026 04:27:21 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.