Opening the book…
So far we have combined waves of the same frequency. Sound two notes of slightly different frequency together and something new happens: the combined loudness rises and falls in a slow throb. At one moment the two waves are in phase and reinforce (loud); a fraction of a second later they have drifted out of phase and cancel (soft); then back again. This periodic swelling is called beats, and the rate at which the loudness pulses is the beat frequency.
Key Equation: Beat frequency
\[f_{\rm beat} = |f_2 - f_1|. \tag{30.9}\]
The beat frequency is simply the difference of the two frequencies. This is exactly how a musician tunes by ear: playing a note against a reference, they adjust until the beats slow and finally vanish, at which point the two frequencies are equal.
Example 30.4: Finding a tuning fork’s frequency by beats
Two out-of-tune flutes play the same intended note. One sounds at \(246\,\mathrm{Hz}\) and the other at \(281\,\mathrm{Hz}\). A tuning fork sounded with the \(246\,\mathrm{Hz}\) flute produces a beat frequency of \(15.0\,\mathrm{Hz}\); sounded with the \(281\,\mathrm{Hz}\) flute it produces \(20.0\,\mathrm{Hz}\). What is the frequency of the tuning fork?
Solution
By equation (30.9), the fork’s frequency differs from \(246\,\mathrm{Hz}\) by \(15.0\,\mathrm{Hz}\), so it is either \(231\,\mathrm{Hz}\) or \(261\,\mathrm{Hz}\). It also differs from \(281\,\mathrm{Hz}\) by \(20.0\,\mathrm{Hz}\), so it is either \(261\,\mathrm{Hz}\) or \(301\,\mathrm{Hz}\). The only value consistent with both measurements is
\[f_{\rm fork} = \boxed{261\,\mathrm{Hz}}.\]
The two beat measurements each leave a twofold ambiguity, but together they pin the answer down: a small lesson in using two clues to remove an ambiguity that neither could resolve alone.
This page titled 30.5: Beats was last modified on Thu, 12 Nov 2026 04:27:21 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.