20.S: Current and Resistance (Summary)

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    20.S: Current and Resistance (Summary)

    Summary

    • Electric current is the rate of flow of charge, \(I = dQ/dt\), measured in amperes (\(1\,\mathrm{A} = 1\,\mathrm{C/s}\)). Its direction is that of positive-charge flow; in metals the electrons move the opposite way. A steady current is the same all along a wire, and requires a field inside the conductor.
    • Current density \(\vec{J}\) is current per unit area. It is related to the drift velocity of the carriers by \(\vec{J} = nq\vec{v}_d\), so \(I = nqAv_d\). Drift speeds in wires are tiny, of order \(0.1\,\mathrm{mm/s}\); the field, and the energy, travel at nearly the speed of light.
    • Resistance is \(R = V/I\), in ohms. A uniform conductor has \(R = \rho L/A\), where the resistivity \(\rho\) is a property of the material; microscopically \(\vec{E} = \rho\vec{J}\), and the Drude model gives \(\rho = m/(ne^2\tau)\). For metals, \(\rho\) rises with temperature, \(\rho = \rho_0[1 + \alpha(T - T_0)]\); for semiconductors it falls.
    • Ohm’s law: for ohmic materials, \(V = IR\) with \(R\) constant, so the \(I\)–\(V\) graph is a straight line through the origin. It is an empirical rule, not a law of nature; diodes and hot filaments are nonohmic.
    • The power delivered to any circuit element is \(P = IV\). In a resistor it becomes heat, \(P = I^2R = V^2/R\). Electrical energy is billed in kilowatt-hours, \(1\,\mathrm{kWh} = 3.6\times 10^{6}\,\mathrm{J}\).

    Key Equations

    Electric current

    \[I = \frac{dQ}{dt}\]

    Current density and drift velocity

    \[J = \frac{I}{A}, \qquad \vec{J} = nq\vec{v}_d, \qquad I = nqAv_d\]

    Resistance, resistivity, and conductivity

    \[R = \frac{V}{I}, \qquad R = \rho\frac{L}{A}, \qquad \vec{E} = \rho\vec{J}, \qquad \sigma = \frac{1}{\rho}\]

    Temperature dependence of resistivity

    \[\rho = \rho_0\left[1 + \alpha(T - T_0)\right]\]

    Ohm’s law

    \[V = IR \quad (R\ \text{constant})\]

    Electrical power

    \[P = IV, \qquad P = I^2R = \frac{V^2}{R} \ \ \text{(resistor)}\]


    This page titled 20.S: Current and Resistance (Summary) was last modified on Thu, 12 Nov 2026 04:25:39 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.