Opening the book…
Difficulty key: ★ introductory, ★★ standard, ★★★ challenging. Use \(e = 1.602\times 10^{-19}\,\mathrm{C}\), \(m_e = 9.11\times 10^{-31}\,\mathrm{kg}\), the resistivities of Table 20.1, and, for copper, \(n = 8.49\times 10^{28}\,\mathrm{m^{-3}}\).
Section 20.1 — Electric Current
20.1 ★ A current of \(3.5\,\mathrm{A}\) flows in a wire for \(4.0\,\mathrm{min}\). How much charge passes any point in the wire, and how many electrons is that?
20.2 ★ [Real-world: batteries.] A phone battery is rated at \(4500\,\mathrm{mAh}\). (a) How many coulombs is that? (b) How long could it supply a steady \(300\,\mathrm{mA}\)?
20.3 ★★ [Conceptual.] In a wire carrying a steady current, electrons move to the left. (a) In which direction does the current flow? (b) In which direction does the electric field inside the wire point? (c) Which end of the wire is at the higher potential?
20.4 ★★ [Real-world: atmospheric physics.] A lightning stroke transfers about \(5.0\,\mathrm{C}\) in about \(0.20\,\mathrm{ms}\). What is the average current?
Section 20.1.1 — Current Density
20.5 ★ A wire of diameter \(1.6\,\mathrm{mm}\) carries \(5.0\,\mathrm{A}\). Find the current density.
20.6 ★★ An aluminum wire carrying \(8.0\,\mathrm{A}\) has a cross-sectional area of \(4.0\,\mathrm{mm^2}\). Aluminum contributes about three free electrons per atom, giving \(n = 1.8\times 10^{29}\,\mathrm{m^{-3}}\). Find the drift speed.
20.7 ★★ How long does it take a single electron to drift \(2.0\,\mathrm{m}\) along the wire of Example 20.2? Compare with the time for the signal to travel the same distance at nearly the speed of light.
20.8 ★★★ In a particle accelerator, a beam of protons moving at \(3.0\times 10^{7}\,\mathrm{m/s}\) carries a current of \(2.0\,\mathrm{mA}\) and has a circular cross-section of radius \(1.0\,\mathrm{mm}\). Find (a) the current density and (b) the number of protons per cubic meter in the beam.
Section 20.2 — Resistance
20.9 ★ A \(12\,\mathrm{V}\) car headlight draws \(4.5\,\mathrm{A}\). What is its resistance?
20.10 ★★ [Conceptual.] Using the water-pipe analogy, explain why a long, thin wire has more resistance than a short, thick one of the same material.
Section 20.2.1 — Resistivity
20.11 ★ Find the resistance of a \(50\,\mathrm{m}\) aluminum wire of diameter \(2.0\,\mathrm{mm}\).
20.12 ★★ A nichrome heating element is to have a resistance of \(24\,\mathrm{\Omega}\) using wire of diameter \(0.50\,\mathrm{mm}\). How long must the wire be?
20.13 ★★ A copper wire and an aluminum wire have the same length and the same resistance. What is the ratio of their diameters? Which is lighter? (Densities: copper \(8.96\times 10^{3}\,\mathrm{kg/m^3}\), aluminum \(2.70\times 10^{3}\,\mathrm{kg/m^3}\).) This is why overhead power lines are made of aluminum.
20.14 ★★ A tungsten lamp filament has a resistance of \(20\,\mathrm{\Omega}\) at \(20\,^{\circ}\mathrm{C}\). Estimate its resistance at its operating temperature of \(2500^{\circ}\mathrm{C}\), using equation (20.8). (The linear formula is only rough over so large a range.)
20.15 ★★ A copper wire has a resistance of \(5.00\,\mathrm{\Omega}\) at \(20\,^{\circ}\mathrm{C}\). At what temperature is its resistance \(6.00\,\mathrm{\Omega}\)?
20.16 ★★★ A hollow copper cylinder of length \(L\) has inner radius \(a\) and outer radius \(b\). Current flows radially, from the inner surface to the outer. Show that the resistance is \(R = (\rho/2\pi L)\ln(b/a)\). (Hint: add up thin cylindrical shells in series.)
Section 20.3 — Ohm’s Law
20.17 ★ What current flows through a \(2.2\,\mathrm{k\Omega}\) resistor connected across \(5.0\,\mathrm{V}\)?
20.18 ★★ [Graph-reading.] The graph shows current against voltage for two devices, \(A\) and \(B\).
- Which device is ohmic? Find its resistance.
- Find the resistance of \(B\) at \(1.0\,\mathrm{V}\) and at \(5.0\,\mathrm{V}\).
- Does the resistance of \(B\) increase or decrease with voltage? What kind of device might behave this way?
20.19 ★★ [Conceptual.] A battery is connected to a length of copper wire and a current flows. The wire is then cut in half and one half is connected to the same battery. Assuming the battery’s voltage stays fixed, what happens to the current?
Section 20.4 — Electrical Power
20.20 ★ A \(9.0\,\mathrm{V}\) battery supplies \(25\,\mathrm{mA}\) to a circuit. What power does it deliver?
20.21 ★ What is the resistance of a \(1200\,\mathrm{W}\) hair dryer designed for \(120\,\mathrm{V}\), and what current does it draw?
20.22 ★★ [Real-world: household energy.] A refrigerator uses about \(450\,\mathrm{kWh}\) per year. What is its average power? At \(\$0.30\) per kWh, what does it cost to run for a year?
20.23 ★★ An electric kettle heats \(1.0\,\mathrm{L}\) of water from \(20\,^{\circ}\mathrm{C}\) to \(100\,^{\circ}\mathrm{C}\) in \(3.0\,\mathrm{min}\). Assuming all the electrical energy goes into the water (specific heat \(4186\,\mathrm{J/(kg\cdot K)}\), Chapter 37), what power does it draw, and what current if it runs on \(230\,\mathrm{V}\)?
20.24 ★★ The same wire carries a current \(I\) in two circuits, and in the second the current is doubled. By what factor does the power dissipated in the wire change? If instead the voltage across a resistor is doubled, by what factor does its power change?
20.25 ★★★ In Example 20.10, what fraction of the power is lost if it is transmitted at \(100\,\mathrm{kV}\)? At what transmission voltage would the loss be exactly \(1\%\)?
20.26 ★★★ [Real-world: electrical safety.] Household wiring uses copper wire of diameter \(2.05\,\mathrm{mm}\) on a \(15\,\mathrm{A}\) circuit. (a) Find the resistance per meter of the wire. (b) Find the power dissipated per meter at \(15\,\mathrm{A}\). (c) Explain why using a thinner wire, or overloading the circuit, can start a fire inside a wall, and what the circuit breaker is for.
20.27 ★★★ Show that the power dissipated per unit volume in a resistor is \(J^2\rho = \sigma E^2\). Use it to find the power per cubic meter dissipated in the copper wire of Example 20.2.
20.28 ★★★ A cylindrical wire of radius \(R\) and length \(L\) has a resistivity that increases with distance from its axis, \(\rho(r) = \rho_0(1 + r^2/R^2)\). A potential difference \(V\) is applied between its ends. (a) Find the current density as a function of \(r\). (b) Find the total current, and hence the resistance.
This page titled 20.E: Current and Resistance (Problems) was last modified on Thu, 12 Nov 2026 04:27:00 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.