33.2: Interference and Double-Slit Intensity

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    33.2: Interference and Double-Slit Intensity

    Equations (33.2) and (33.3) tell us where the bright and dark fringes are, but not how the brightness varies in between. For that we must add the two waves as waves, amplitude and phase together. The cleanest bookkeeping tool is the phasor: a rotating vector whose length is a wave’s amplitude and whose angle is its phase. Adding two waves becomes adding two vectors, tip to tail, and “in phase” or “out of phase” becomes simple geometry.

    Phasor triangle adding two waves of equal amplitude E nought that differ in phase.
    Figure 33.3. Phasor addition of two waves of equal amplitude \(E_0\) differing in phase by \(\phi\). The resultant amplitude is \(E = 2E_0\cos(\phi/2)\), largest when \(\phi=0\) (in phase) and zero when \(\phi=\pi\) (opposed).
    Figure descriptionA phasor triangle. A blue arrow of length E nought points to the right from the origin. A second blue arrow of the same length E nought starts at its tip, rotated upward by the phase difference phi, marked by a small arc. A red arrow closes the figure from the origin to the far tip; it is the resultant, labeled E equals 2 E nought cosine of phi over 2. The triangle is isosceles, which is why the resultant takes that form.

    The two waves arriving at \(P\) have equal amplitude \(E_0\) but differ in phase by an amount set by their path difference. Since a full wavelength of path corresponds to \(2\pi\) of phase, the phase difference is

    \[\phi = \frac{2\pi}{\lambda}\,\delta = \frac{2\pi d}{\lambda}\sin\theta. \tag{33.6}\]

    Drawn as phasors, the two equal vectors meet at angle \(\phi\) (Figure 33.3). Their resultant, by the geometry of the isosceles triangle they form, has amplitude

    \[E = 2E_0\cos\!\left(\frac{\phi}{2}\right). \tag{33.7}\]

    Intensity is proportional to amplitude squared, so writing \(I_0\) for the intensity a single slit would give and noting that two in-phase slits give \(4I_0\) at the peak,

    Key Equation: Double-slit intensity

    \[I = 4I_0\cos^2\!\left(\frac{\phi}{2}\right), \qquad \phi = \frac{2\pi d}{\lambda}\sin\theta. \tag{33.8}\]

    A graph of double-slit intensity against d sine theta over lambda.
    Figure 33.4. Double-slit intensity versus \(d\sin\theta/\lambda\). Maxima of height \(4I_0\) occur at integer orders \(m\); minima (zero) fall halfway between. The brightness varies as \(\cos^2\).
    Figure descriptionA graph of double-slit intensity against d sine theta over lambda. The curve is a smooth cosine-squared, rising to identical peaks of height 4 I nought at every integer value -- minus 3, minus 2, minus 1, 0, 1, 2, 3 -- and falling to exactly zero halfway between each pair. A dashed horizontal line at 4 I nought shows the peaks are all the same height, with no fading toward the edges.

    This single expression contains the fringe conditions. The intensity peaks at \(4I_0\) whenever \(\phi\) is a multiple of \(2\pi\) (that is, when \(d\sin\theta = m\lambda\), recovering equation (33.2)) and drops to zero when \(\phi\) is an odd multiple of \(\pi\), i.e. \(d\sin\theta = (m+\tfrac12)\lambda\), recovering equation (33.3). Between the peaks the brightness varies smoothly as \(\cos^2\) (Figure 33.4). Notice the peaks are all the same height: idealized double-slit fringes do not fade with distance from center. (In a real experiment the finite width of each slit imposes a slowly falling envelope: the subject of the next chapter, diffraction.)

    Example 33.3: Brightness between fringes

    Two slits \(0.180\,\mathrm{mm}\) apart are lit by \(656.3\,\mathrm{nm}\) light, forming a pattern on a screen \(80.0\,\mathrm{cm}\) away. What fraction of the maximum intensity appears at a point \(y = 0.600\,\mathrm{cm}\) from the central maximum?

    Solution

    First find the phase difference there. With \(\sin\theta \approx y/L = (0.600\times10^{-2})/(0.800) = 7.50\times10^{-3}\), the path difference is

    \[\delta = d\sin\theta = (1.80\times10^{-4}\,\mathrm{m})(7.50\times10^{-3}) = 1.35\times10^{-6}\,\mathrm{m},\]

    so

    \[\phi = \frac{2\pi}{\lambda}\,\delta = \frac{2\pi (1.35\times10^{-6})}{656.3\times10^{-9}} = 12.92\,\mathrm{rad}.\]

    Then, by equation (33.8),

    \[\frac{I}{I_{\max}} = \cos^2\!\left(\frac{\phi}{2}\right) = \cos^2(6.462\,\mathrm{rad}) = \boxed{0.968}.\]

    The point lies close to a bright fringe (\(\delta/\lambda = 2.06\), just past the second order), so it shines at about \(97\%\) of full brightness: consistent with sitting near, but not exactly on, the \(m=2\) maximum.


    This page titled 33.2: Interference and Double-Slit Intensity was last modified on Thu, 12 Nov 2026 04:27:08 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.