Opening the book…
Chapter 31 described how a light wave moves forward by Huygens’ principle, and why its wave nature stays hidden whenever it passes through openings much larger than its wavelength. To reveal it, light must pass through openings comparable to its wavelength, where it spreads out and overlaps with itself. Even then, overlapping light does not automatically produce a visible pattern. For two beams to produce a stable interference pattern they must be coherent: they must keep a fixed phase relationship over time. Two separate light bulbs never interfere visibly, because each emits in random, ever-shifting bursts; their pattern flickers away faster than any eye or detector can catch. Young’s trick was to illuminate both slits with light from a single source, so that whatever the phase does, it does identically at the two slits. A laser does this for us today.
In Young’s experiment, coherent light of wavelength \(\lambda\) falls on two narrow slits separated by a distance \(d\), and the overlapping light lands on a screen a distance \(L\) away (Figure 33.1). Consider the light reaching a point \(P\) on the screen at angle \(\theta\) from the central axis. Because the two slits are not equidistant from \(P\), the wave from the farther slit travels an extra distance: the path difference. When the screen is far away (\(L \gg d\)), the two rays to \(P\) are very nearly parallel, and a little geometry gives the path difference as
\[\delta = d\sin\theta. \tag{33.1}\]
If this extra path is a whole number of wavelengths, the two waves arrive crest-to-crest and reinforce: a bright fringe (constructive interference). If it is a half-integer number of wavelengths, they arrive crest-to-trough and cancel: a dark fringe (destructive interference):
Key Equation: Double-slit fringe conditions
\begin{align}d\sin\theta &= m\lambda, & &\text{(bright, maxima)} \tag{33.2} \\ d\sin\theta &= \left(m+\tfrac{1}{2}\right)\lambda, & &\text{(dark, minima)} \tag{33.3}\end{align}
with the order \(m = 0, 1, 2, \dots\)
The central bright fringe (\(m=0\)) sits straight ahead, where the paths are equal. For points near the center the angle is small, so \(\sin\theta \approx \tan\theta = y/L\), where \(y\) is the distance up the screen, measured from the center of the central bright fringe (Figure 33.2). The bright fringes then fall at
\[y_{\text{bright}} = m\,\frac{\lambda L}{d}, \tag{33.4}\]
evenly spaced, with adjacent bright fringes separated by
\[\Delta y = \frac{\lambda L}{d}. \tag{33.5}\]
The dark fringes fall halfway between the bright ones, at \(y_{\text{dark}} = \left(m+\tfrac{1}{2}\right)\lambda L/d\). Figure 33.2 shows both sets of fringes on the screen: \(y_m\) locates a single fringe measured from the center, while \(\Delta y\) is the gap between any two neighbors. The pattern is a direct ruler for the wavelength: measure the fringe spacing, the slit separation, and the screen distance, and you have \(\lambda\).
Example 33.1: Measuring a wavelength
A screen sits \(L = 4.80\,\mathrm{m}\) from a double slit whose slits are \(d = 0.0300\,\mathrm{mm}\) apart. The first dark fringe appears \(4.50\,\mathrm{cm}\) from the center line. (a) Find the wavelength. (b) Find the spacing between adjacent bright fringes.
Solution
(a) The first dark fringe is the \(m=0\) minimum, at \(d\sin\theta = \tfrac{1}{2}\lambda\). Using \(\sin\theta \approx y/L\),
\[\frac{1}{2}\lambda = d\,\frac{y}{L} \;\Rightarrow\; \lambda = \frac{2dy}{L} = \frac{2(3.00\times10^{-5}\,\mathrm{m})(0.0450\,\mathrm{m})}{4.80\,\mathrm{m}} = 5.63\times10^{-7}\,\mathrm{m} = \boxed{563\,\mathrm{nm}},\]
a yellow-green light.
(b) The bright-fringe spacing is
\[\Delta y = \frac{\lambda L}{d} = \frac{(5.625\times10^{-7}\,\mathrm{m})(4.80\,\mathrm{m})}{3.00\times10^{-5}\,\mathrm{m}} = \boxed{9.00\times10^{-2}\,\mathrm{m} = 9.00\,\mathrm{cm}}.\]
As a check, the first dark fringe should sit halfway between the central and first bright fringes, at \(\tfrac{1}{2}(9.00\,\mathrm{cm}) = 4.50\,\mathrm{cm}\), exactly as given.
Example 33.2: Two colors, two patterns
A source emits two wavelengths, \(\lambda = 430\,\mathrm{nm}\) and \(\lambda' = 510\,\mathrm{nm}\), into a double slit with \(L = 1.50\,\mathrm{m}\) and \(d = 0.0250\,\mathrm{mm}\). How far apart are the two third-order (\(m=3\)) bright fringes?
Solution
Each color makes its own pattern; using \(y_{\text{bright}} = m\lambda L/d\) for \(m=3\),
\[y_3 = \frac{3\lambda L}{d}, \qquad y_3' = \frac{3\lambda' L}{d}.\]
Their separation is
\[\Delta y = \frac{3L}{d}(\lambda' - \lambda) = \frac{3(1.50\,\mathrm{m})}{2.50\times10^{-5}\,\mathrm{m}}\,(510-430)\times10^{-9}\,\mathrm{m} = \boxed{1.44\times10^{-2}\,\mathrm{m} = 1.44\,\mathrm{cm}}.\]
Because each color lands its fringes at its own spacing, white light spreads every order after the central one into a little spectrum, which is why the higher fringes show colored edges.
Checkpoint 33.1
In a double-slit experiment the fringe spacing is \(\Delta y = \lambda L/d\). What happens to the spacing if (a) the slits are moved closer together, halving \(d\); (b) red light is replaced by blue; (c) the whole apparatus is submerged in water, \(n = 1.33\)?
Answers to Checkpoints
Checkpoint 33.1. (a) Halving \(d\) doubles the spacing: slits closer together spread the pattern out. (b) Blue light has a shorter wavelength than red, so the spacing shrinks. (c) In water the wavelength shortens to \(\lambda/n\), so every spacing shrinks by the factor \(1.33\): the fringes crowd together.
This page titled 33.1: Young’s Double-Slit Experiment was last modified on Thu, 12 Nov 2026 04:27:08 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.