32.4: Optical Systems

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    32.4: Optical Systems
    To-scale ray diagram of a two-lens system, light traveling left to right.
    Figure 32.8. An optical system, handled one element at a time. Lens 1 forms an intermediate image (“image 1”); that image then serves as the object for lens 2, which forms the final image. Total magnification is the product, \(m_{\text{total}} = m_1 m_2\). (Drawn to scale for the worked example below: the final image is real and forms \(60\,\mathrm{cm}\) beyond lens 2, far from image 1.)
    Figure descriptionA to-scale ray diagram of the two-lens example, with light traveling left to right along a horizontal axis. A green upright object stands at the left, then lens 1, then lens 2 further right, with the focal points of each marked. Three red rays from the object's tip pass through lens 1 and meet halfway between the two lenses, forming image 1: a real, inverted, half-size gray arrow, labeled as the object for lens 2. Three gold rays then leave image 1's tip and pass through lens 2: one parallel to the axis that bends through lens 2's far focal point, one straight through its center, and one through its near focal point that leaves parallel. They meet far to the right of lens 2, at the tip of the final image: a real, upright gray arrow twice the height of the object, far from image 1.

    Real instruments (microscopes, telescopes, camera zooms, the eye behind your eyeglasses) string several mirrors and lenses together; Section 32.5 looks at the most important ones. These look intimidating but yield to one simple rule: handle the optics one at a time, in the order the light meets them. Treat the first optic as though it were alone and find the image it forms. Then use that image as the object for the second optic, find the new image, and repeat down the line (Figure 32.8). The work is not harder, only longer.

    Two cautions make the bookkeeping reliable. First, the object distance for each optic is measured from that optic, so you must account for the spacing between elements. Second, if the first image would land beyond the second optic (the light is still converging toward it when it arrives), that image acts as a virtual object for the second optic, entering its equation with a negative object distance. The total magnification of the system is the product of the individual magnifications:

    \[m_{\text{total}} = m_1 \times m_2 \times \cdots \tag{32.6}\]

    Example 32.4: A two-lens system

    Two thin converging lenses, of focal lengths \(f_1 = 10.0\,\mathrm{cm}\) and \(f_2 = 12.0\,\mathrm{cm}\), are separated by \(30.0\,\mathrm{cm}\). An object is placed \(30.0\,\mathrm{cm}\) to the left of lens 1. Find the position and magnification of the final image.

    Solution

    Lens 1 alone. With \(p_1 = 30.0\,\mathrm{cm}\) and \(f_1 = 10.0\,\mathrm{cm}\),

    \[\frac{1}{i_1} = \frac{1}{10.0} - \frac{1}{30.0} = 0.0667\,\mathrm{cm^{-1}}, \quad i_1 = +15.0\,\mathrm{cm},\]

    a real image \(15.0\,\mathrm{cm}\) to the right of lens 1, with \(m_1 = -i_1/p_1 = -15.0/30.0 = -0.500\).

    Lens 2. Lens 2 sits \(30.0\,\mathrm{cm}\) right of lens 1, so this image lands \(30.0 - 15.0 = 15.0\,\mathrm{cm}\) to the left of lens 2: a real object for lens 2, \(p_2 = +15.0\,\mathrm{cm}\). Then

    \[\frac{1}{i_2} = \frac{1}{12.0} - \frac{1}{15.0} = 0.0167\,\mathrm{cm^{-1}}, \quad i_2 = \boxed{+60.0\,\mathrm{cm}},\]

    a real image \(60.0\,\mathrm{cm}\) to the right of lens 2, with \(m_2 = -i_2/p_2 = -60.0/15.0 = -4.00\).

    Combine. The final image lies \(60.0\,\mathrm{cm}\) right of lens 2 (\(90.0\,\mathrm{cm}\) right of lens 1, and \(75.0\,\mathrm{cm}\) beyond image 1), and the total magnification is

    \[m_{\text{total}} = m_1 m_2 = (-0.500)(-4.00) = \boxed{+2.00}.\]

    The final image is real, upright, and twice the size of the object. Each lens inverts the image it is handed, so two inversions bring it back upright. Because image 1 sits just outside lens 2’s focal length, lens 2 throws the final image far downstream and enlarges it, which is how a projector or a relay lens works. Each step was an ordinary single-lens problem; the system was just two of them in a row.

    Checkpoint 32.4

    In a two-lens system, the first lens has magnification \(m_1 = -2\) and the second \(m_2 = -3\). (a) Is the final image upright or inverted, and how large is it compared with the object? (b) If instead the first lens’s image would land beyond the second lens, what sign does the second lens’s object distance \(p_2\) take, and why?

    Answer

    Answers to Checkpoints

    Checkpoint 32.4. (a) The total magnification is \(m_1m_2 = (-2)(-3) = +6\). The image is upright (each lens inverts, and two inversions restore the original orientation) and six times the size of the object. (b) Negative. The light is still converging when it reaches the second lens, so the first image, which it would have formed farther on, lies on the outgoing side of that lens: a virtual object. Measured from the second lens, it is on the “wrong” side for a real object, so \(p_2 < 0\).


    This page titled 32.4: Optical Systems was last modified on Thu, 12 Nov 2026 04:27:14 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.