32.3: Thin Lenses

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    32.3: Thin Lenses

    A lens forms images by refraction (Chapter 31) rather than reflection, bending light as it enters and leaves the glass. A thin lens is one whose thickness is negligible compared with the distances involved, which lets us treat both bendings as happening at a single plane. As with mirrors there are two families. A converging (convex) lens is thicker at its middle and brings parallel rays together at a real focal point on the far side. A diverging (concave) lens is thinner at the middle and spreads parallel rays apart, so they appear to come from a virtual focal point on the near side. A lens has a focal point on each side, symmetric about its center.

    A ray diagram for a converging lens, drawn as a lens thicker at the middle than at the edges.
    Figure 32.4. Ray diagram for a converging lens, with the object more than twice the focal length away. The parallel ray bends through the far focal point, the central ray passes straight through, and the ray through the near focal point leaves parallel. All three meet on the far side: a real, inverted, reduced image.
    Figure descriptionA ray diagram for a converging lens, drawn as a lens thicker at the middle than at the edges. A focal point F is marked on each side. A green upright object arrow stands on the left, more than twice the focal length from the lens. Three red rays leave its tip. The first travels parallel to the axis and, after the lens, bends down through the far focal point. The second passes straight through the center of the lens undeviated. The third passes through the near focal point on the way in and leaves the lens parallel to the axis. All three meet at one point on the right, between F and twice the focal length, where a gray arrow points downward: a real, inverted, reduced image.
    A ray diagram for a diverging lens, drawn as a lens thinner at the middle than at the edges.
    Figure 32.5. Ray diagram for a diverging lens. The central ray passes straight through; the parallel ray bends away from the axis as if diverging from the near focal point \(F\); and the ray aimed at the far focal point \(F'\) (dotted) leaves parallel. Traced backward (dashed), they meet on the object side: a virtual, upright, reduced image.
    Figure descriptionA ray diagram for a diverging lens, drawn as a lens thinner at the middle than at the edges. A near focal point F is marked on the object side and a far one F prime on the other. A green upright object arrow stands to the left. Three red rays leave its tip. The first passes straight through the center of the lens. The second arrives parallel to the axis and, after the lens, bends away from the axis, upward and to the right; a dashed red line extends it backwards through the near focal point. The third is aimed at the far focal point F prime and leaves the lens parallel to the axis; a dashed red line extends it straight back. The three backward extensions and the central ray meet on the object side at a short dashed green arrow between the lens and the object: a virtual, upright, reduced image.

    The wonderful economy of the subject is that a thin lens obeys the same equations as a mirror; the thin-lens equation is identical to equation (32.3), and the magnification to equation (32.4), with the very same sign convention of Table 32.1. The only adjustment is geometric: for a lens, light passes through, so a real image forms on the side opposite the object (whereas a mirror’s real image forms on the same side). To trace rays through a lens, use these principal rays:

    • A ray through the center of the lens passes straight through, undeviated.
    • For a converging lens: a ray entering parallel to the axis leaves through the far focal point; a ray entering through the near focal point leaves parallel.
    • For a diverging lens: a ray entering parallel to the axis leaves as if it came from the near focal point; a ray heading toward the far focal point leaves parallel.

    Figure 32.4 traces a converging lens with the object beyond twice the focal length; the rays meet on the far side, giving a real, inverted, reduced image, the situation inside a camera. Move the object inside the focal point and the same lens behaves quite differently (Figure 32.6): the refracted rays now diverge, and traced backward they meet on the object’s own side, giving a virtual, upright, enlarged image. That is how a magnifying glass works.

    A ray diagram for a converging lens used as a magnifying glass.
    Figure 32.6. A converging lens as a magnifying glass. With the object inside the focal point, the three principal rays diverge on the far side. (The third ray travels along the line from the near focal point through the object’s tip, dotted, and leaves parallel.) Traced backward (dashed), they meet on the object’s side, so the eye sees a virtual, upright, enlarged image. Here \(p = 0.6f\) gives \(i = -1.5f\) and \(m = +2.5\).
    Figure descriptionA ray diagram for a converging lens used as a magnifying glass. A short green upright object stands on the axis between the lens and its near focal point F. Three red rays leave the object's tip. One runs parallel to the axis and bends through the far focal point. One passes straight through the center of the lens. The third travels along the line from the near focal point through the object's tip, reaches the lens high up, and leaves parallel to the axis. On the far side the rays spread apart and never meet. Traced backwards as dashed lines, they meet on the object's side of the lens, farther away than the object and higher up, where a dashed gray upright arrow, about two and a half times as tall as the object, marks the virtual, upright, enlarged image.

    A diverging lens tells a different story (Figure 32.5). Its focal length is negative, and it spreads parallel rays apart as though they came from a focal point on the near side. Whatever the object distance, a diverging lens always forms a virtual, upright, reduced image on the same side as the object, which is why peephole and some eyeglass lenses, used to widen the field or correct nearsightedness, always shrink what you see.

    Example 32.2: A converging lens, three placements

    A converging lens has a focal length of \(10.0\,\mathrm{cm}\). Find and describe the image when an object is placed (a) \(30.0\,\mathrm{cm}\), (b) \(10.0\,\mathrm{cm}\), and (c) \(5.00\,\mathrm{cm}\) from the lens.

    Solution

    Use the thin-lens equation, \(1/i = 1/f - 1/p\), with \(f = +10.0\,\mathrm{cm}\) (converging).

    (a) \(p = 30.0\,\mathrm{cm}\): \[\frac{1}{i} = \frac{1}{10.0} - \frac{1}{30.0} = 0.0667\,\mathrm{cm^{-1}}, \quad i = \boxed{+15.0\,\mathrm{cm}}, \quad m = -\frac{15.0}{30.0} = -0.500.\]

    The image is real (\(i>0\), far side), inverted (\(m<0\)), and reduced: the camera case.

    (b) \(p = 10.0\,\mathrm{cm}\) (object at \(F\)): \[\frac{1}{i} = \frac{1}{10.0} - \frac{1}{10.0} = 0, \quad i \to \boxed{\infty}.\]

    The refracted rays come out parallel and never meet: no image forms. (This is how a spotlight or lighthouse makes a parallel beam: source at the focal point.)

    (c) \(p = 5.00\,\mathrm{cm}\) (object inside \(F\)): \[\frac{1}{i} = \frac{1}{10.0} - \frac{1}{5.00} = -0.100\,\mathrm{cm^{-1}}, \quad i = \boxed{-10.0\,\mathrm{cm}}, \quad m = -\frac{-10.0}{5.00} = +2.00.\]

    The image is virtual (\(i<0\), same side as object), upright, and enlarged \(2\times\). This is the magnifying glass: bring the object inside the focal length and the lens enlarges it.

    The lensmaker’s equation

    The focal length of a lens is not arbitrary: it is set by the lens’s material and the curvature of its two faces. For a thin lens in air of index of refraction \(n\), with surface radii of curvature \(r_1\) and \(r_2\),

    Key Equation: Lensmaker’s equation

    \[\frac{1}{f} = (n-1)\!\left(\frac{1}{r_1} - \frac{1}{r_2}\right). \tag{32.5}\]

    Here \(r_1\) is the radius of the surface the light meets first and \(r_2\) that of the surface it leaves through. Each surface is a piece of a sphere, and its radius is the radius of that sphere (Figure 32.7). Each radius is taken positive if its surface bulges toward the incoming light and negative if it caves inward, so the equation automatically returns a positive \(f\) for a converging lens and a negative \(f\) for a diverging one.

    Two lenses, each shown with the two spheres its faces are cut from, defining r1 and r2.
    Figure 32.7. Where \(r_1\) and \(r_2\) come from. Each face of a lens is part of a sphere (dashed); its radius is that sphere’s radius, measured from the center of curvature \(C_1\) or \(C_2\). (a) A converging lens with unequal faces. The first face bulges toward the incoming light, so \(r_1 > 0\); the second curves away from it, so \(r_2 < 0\). (b) A diverging lens. Both faces cave in, so the signs reverse: \(r_1 < 0\) and \(r_2 > 0\).
    Figure descriptionTwo lenses with light arriving from the left, each shown with the two spheres its faces are cut from. Panel a, a converging lens with unequal faces: the left face is strongly curved and the right face gently curved. The left face is part of a small dashed circle whose center C sub 1 lies to the right of the lens; a radius line from C sub 1 to the left face is labeled r sub 1, positive, because that face bulges toward the incoming light. The right face is part of a larger dashed circle whose center C sub 2 lies to the left of the lens; a radius line from C sub 2 to the right face is labeled r sub 2, negative, because that face curves away from the incoming light. Panel b, a diverging lens with unequal faces: the left face caves in, so its center C sub 1 lies to the left and r sub 1 is negative; the right face caves in toward the outgoing side, so its center C sub 2 lies to the right and r sub 2 is positive.
    Example 32.3: Grinding a diverging lens

    A symmetric biconcave lens is ground from glass of index \(n = 1.55\) so that its focal length in air is \(20\,\mathrm{cm}\) (in magnitude). Both surfaces have the same radius of curvature; find it.

    Solution

    A biconcave lens is diverging, so \(f = -20\,\mathrm{cm}\). “Symmetric” means both faces share a radius magnitude \(R\); for a biconcave lens the first surface caves in (\(r_1 = -R\)) and the second, seen from inside the glass, bulges back toward the incoming light (\(r_2 = +R\)). The lensmaker’s equation, equation (32.5), becomes

    \[\frac{1}{f} = (n-1)\!\left(\frac{1}{-R} - \frac{1}{+R}\right) = (n-1)\!\left(-\frac{2}{R}\right).\]

    Solve for \(R\):

    \[R = -2(n-1)\,f = -2(1.55-1)(-20\,\mathrm{cm}) = -2(0.55)(-20\,\mathrm{cm}) = \boxed{22\,\mathrm{cm}}.\]

    Each face is ground to a radius of \(22\,\mathrm{cm}\). As a check, a stronger (shorter-\(f\)) lens would need a tighter curve (a smaller \(R\)), which is just what the equation says.

    Checkpoint 32.3

    You hold a converging lens at arm’s length and see the room behind you small, upside down, and real-looking; you bring the lens close to a printed page and the letters jump up large and right-side up. In terms of the object distance relative to \(f\), explain why the same lens does two such different things. (Compare with parts (a) and (c) of the worked example.)

    Answer

    Answers to Checkpoints

    Checkpoint 32.3. The difference is the object distance. The room is far away, \(p > 2f\), so the lens forms a real, inverted, reduced image on your side of the lens, which is what you see. The page is close, \(p < f\): the rays leaving the lens still diverge, and they appear to come from a virtual, upright, enlarged image behind the page. The same lens acts as a camera for distant objects and as a magnifier for objects inside its focal length.


    This page titled 32.3: Thin Lenses was last modified on Thu, 12 Nov 2026 04:27:14 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.