32.2: Spherical Mirrors

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    32.2: Spherical Mirrors
    Two panels: a concave mirror focusing parallel rays and a convex mirror diverging them.
    Figure 32.2. Spherical mirrors. (a) A concave mirror reflects parallel rays through a real focal point \(F\) in front. (b) A convex mirror reflects them so they diverge, appearing to come from a virtual \(F\) behind. In both, \(F\) lies halfway to the center of curvature \(C\), so \(f = R/2\).
    Figure descriptionTwo panels comparing spherical mirrors. Panel (a), concave, shows a mirror arc curving away from the incoming light, with the center of curvature C and the focal point F marked on the axis in front of it, F halfway between C and the mirror. Four red rays arrive parallel to the axis and, after reflecting, all cross at F. Panel (b), convex, shows an arc curving toward the light, with C and F marked behind the mirror. Parallel rays reflect off it and spread apart; dashed gray lines extend each reflected ray backwards to meet at the virtual F. Both panels mark f from the mirror to F and R equals 2 f from the mirror to C.

    Curve a mirror and it gains a power the flat one lacks: it can bring light to a focus and form real images, magnify, or shrink. The simplest curved mirrors are spherical mirrors: a small slice cut from the surface of a sphere. Which face you silver decides its type. A concave mirror has its reflecting surface on the inside of the curve, cupped toward you like the bowl of a spoon: it is, conveniently, shaped like a cave, which is how to remember the name. A convex mirror bulges toward you, its reflecting surface on the outside of the curve, like the back of the spoon.

    Every spherical mirror has a center of curvature \(C\) (the center of the sphere it was cut from) and a focal point \(F\). The focal point is where rays arriving parallel to the central axis (the principal axis) cross after reflecting (Figure 32.2). For a concave mirror these parallel rays genuinely converge through \(F\) in front of the mirror; for a convex mirror they spread apart after reflecting, and only their backward extensions meet, at a virtual \(F\) behind the mirror. The focal point sits halfway between the mirror and its center of curvature, so the focal length is half the radius:

    Key Equation: Focal length of a spherical mirror

    \[f = \frac{R}{2}. \tag{32.2}\]

    Ray diagrams

    A ray diagram for a concave mirror with the object beyond the center of curvature.
    Figure 32.3. Ray diagram for a concave mirror with the object beyond \(C\). The parallel ray reflects through \(F\), the ray through \(F\) reflects parallel, and the ray striking the center \(P\) reflects at an equal angle on the other side of the axis. All three cross at one point in front of the mirror, forming a real, inverted, reduced image.
    Figure descriptionA ray diagram for a concave mirror with the object beyond the center of curvature. A green upright arrow stands to the left of C on the axis. Three red rays leave its tip. The first travels parallel to the axis, hits the mirror, and reflects back through the focal point F. The second passes through F on the way in, hits the mirror below the axis, and reflects back parallel to the axis. The third strikes the mirror at its center P, where the axis meets it, and reflects at an equal angle below the axis. All three cross at a single point between C and F, the tip of a short gray arrow pointing downward from the axis: the image is real, inverted, and smaller than the object.

    To locate an image without algebra, trace two principal rays from the top of the object; where they cross (or appear to) is the top of the image. For mirrors:

    • A ray arriving parallel to the principal axis reflects back through the focal point \(F\).
    • A ray passing through the focal point \(F\) reflects back parallel to the axis.

    Two more rays make useful checks. A ray striking the mirror at its center \(P\) reflects at an equal angle on the other side of the axis, just as it would from a plane mirror, and a ray aimed through the center of curvature \(C\) strikes the mirror head-on and returns along itself. Any two rays locate the image; a third confirms it. Figure 32.3 traces three rays for an object placed beyond \(C\) on a concave mirror; they cross in front of the mirror, so the image is real, inverted, and (here) reduced.

    The mirror equation

    Ray diagrams show the kind of image; for its exact location and size we use the mirror equation, which ties together the focal length \(f\), the object distance \(p\), and the image distance \(i\) (all measured from the mirror):

    Key Equation: Mirror (and thin-lens) equation

    \[\frac{1}{f} = \frac{1}{p} + \frac{1}{i}. \tag{32.3}\]

    The size and orientation come from the magnification, the ratio of image height \(h'\) to object height \(h\):

    Key Equation: Magnification

    \[m = \frac{h'}{h} = -\frac{i}{p}. \tag{32.4}\]

    A positive \(m\) means an upright image, negative means inverted; \(|m| > 1\) is enlarged, \(|m| < 1\) reduced.

    Everything hinges on signs, the part of this subject that trips up the most students. The intuition is to track the direction the incident light travels: a distance measured on the side the light comes from (and returns to, for a mirror) is positive; a distance on the far, “no-light” side is negative. In practice the convention reduces to the rules in Table 32.1, and the same rules will carry over, unchanged, to lenses.

    Table 32.1. Sign convention for mirrors and thin lenses. The same conventions apply to both.
    QuantityPositive (\(+\))Negative (\(-\))
    Object distance \(p\)real object (light side)virtual object (rare)
    Image distance \(i\)real imagevirtual image
    Focal length \(f\)concave mirror, converging lensconvex mirror, diverging lens
    Magnification \(m\)upright imageinverted image
    Example 32.1: A book in a convex mirror

    A convex mirror has a radius of curvature of \(80\,\mathrm{cm}\). A \(14\,\mathrm{cm}\) tall book is placed \(60\,\mathrm{cm}\) in front of the mirrored side. (a) Where is the image? (b) How tall is it?

    Solution

    (a) The mirror is convex, so its focal length is negative: \(f = R/2 = -80/2 = -40\,\mathrm{cm}\). With the object real, \(p = +60\,\mathrm{cm}\). Solve the mirror equation, equation (32.3), for \(i\):

    \[\frac{1}{i} = \frac{1}{f} - \frac{1}{p} = \frac{1}{-40} - \frac{1}{60} = -0.0250 - 0.0167 = -0.0417\,\mathrm{cm^{-1}},\]

    \[i = \boxed{-24\,\mathrm{cm}}.\]

    The negative sign means the image is virtual, sitting \(24\,\mathrm{cm}\) behind the mirror.

    (b) The magnification, equation (32.4), is

    \[m = -\frac{i}{p} = -\frac{-24}{60} = +0.40,\]

    so the image is upright (positive \(m\)) and reduced. Its height is

    \[h' = m\,h = (0.40)(14\,\mathrm{cm}) = \boxed{5.6\,\mathrm{cm}}.\]

    This is exactly why convex mirrors are used as security and passenger-side mirrors: they form small, upright, virtual images and so pack a wide field of view into a little glass, the reason for the etched warning that objects are closer than they appear.

    Checkpoint 32.2

    A dentist holds a small mirror that makes an enlarged, upright image of a tooth. Must the mirror be concave or convex? Where is the tooth relative to the mirror’s focal point? (Reason from Table 32.1 and the sign of \(m\).)

    Answer

    Answers to Checkpoints

    Checkpoint 32.2. Concave. A convex mirror always gives a reduced upright image, so only a concave mirror can magnify. An upright image has \(m > 0\), which for a mirror means a virtual image (\(i < 0\)); a concave mirror forms an enlarged, upright, virtual image only when the object is inside the focal point, \(p < f\). The dentist holds the mirror closer to the tooth than its focal length.


    This page titled 32.2: Spherical Mirrors was last modified on Thu, 12 Nov 2026 04:27:14 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.