Opening the book…
Lighting is one of the most dangerous elements during film production, and cast and crew are the most precious assets on a set—people are not expendable. This chapter outlines how to implement safety protocols, prevent set accidents, and apply safety and risk assessments using a three-step process referred to as SOS: Spot the hazard, Obtain measures to control the hazard, and put Safeguards in place to minimize hazard.
This chapter covers the entire crew’s responsibilities regarding safety and the specific role of the first assistant director (1st AD) in safety meetings. Improper clothing, adverse weather, fire, electrocution, improper handling of equipment, common injuries, and preventative measures are discussed. How to find and utilize safety awareness bulletins for almost any danger one can think of, such as fog and haze machines, is covered in this chapter. Safety when using weaponry on set is covered in Chapter 14, Lighting for Weaponry.
Hazard and Risk
Hazard refers to the potential for harm. Risk is the chance of that harm happening. Some hazards might seem obvious, but people still need them highlighted. Life is dangerous, but on a set, if there is a risk of 100%, then preventative measures are required for the risk to be 0%. Conducting risk assessments is particularly important and should be conducted ahead of time, as well as on each day of shooting. During these walkthroughs, think about what could possibly go wrong and what could be done to prevent it from occurring. Follow SOS:
- Spot the hazard and determine how risky it is.
- Obtain measures to control the hazard and
- introduce Safeguards to reduce this risk.
The resources at the end of this chapter contains a simple risk assessment template that you can use.
Primarily, make sure you have permission to film and obtain a location permit signed by an appropriate person in authority. Please see the Location Agreement in the resources list at the end of the chapter that you can amend for your own use. If you do not have a permit, it can cause many problems.
Once, near the end of term, a student called me to say his group was filming on a railway line without permission. He had refused to go with them, telling them that it was not safe and that they should refrain from doing so. This student behaved correctly, and I assured them it was the right thing to do. I was 50 miles away and deeply concerned for their safety, so I had to call our local police to inform them. The police had a tough time finding the student crew as they were not at the address given to me by the student.
The following day, I had a long discussion with the students about why they did this. They said that it was an abandoned railway line, and no one knew they were there, so they thought it was OK. They were incredulous when I said those were two more reasons for obtaining permission. What if something had happened to them? They put everyone in harm’s way. The producer, production manager, director, and I could have been liable for reckless endangerment at best or involuntary manslaughter at worst.
Setting aside a designated area as the staging area before anything is set up at a location is especially important. The staging area is for keeping all equipment in the same zone and preferably away from the set itself. If a separate zone cannot be used due to location restraints, then a separate zone away from the central set should be allocated. When everyone breaks for meals, ensure there is at least one fire watcher on the set to look after the equipment and set. If you can spare a second person, that is even better. When the film crew has finished with the location and struck the set (putting all the equipment and gear away), conduct a dummy check—a final walkthrough to make sure nothing has been left behind.
Set Etiquette
Set etiquette demands that everyone pays attention to each other, adheres to the chain of command, takes care of equipment correctly, and does not rush. This is efficient, saves time, and keeps everyone happy and safe. During a student production where roles are often doubled up, it is important to keep the first assistant director (1st AD) responsible for safety. Keep in mind that the key grip can have the last word on safety since they oversee rigging, stands, flags, and other equipment. Safety discussions should be conducted long before filming occurs, and, on a professional shoot, meetings are regularly held with the heads of department, stunt coordinators, pyrotechnic supervisors, animal wranglers, weaponry, props, and other crew divisions. They will identify the hazards, conduct a risk assessment, compile a safety plan, and ensure measures are taken to implement this plan. For a student production, this will be on a smaller scale, but just as important.
Safety Meetings
Safety meetings, conducted by the 1st AD, should occur each day before filming begins and include all affected cast and crew personnel. When someone arrives after the meeting, the 1st AD must review safety with them before they start work.
A safety meeting checklist covers everything relating to the goals for the safety meeting:
- Communicates potential hazards to everyone.
- Establishes safe working zones.
- Ensures everyone knows their roles and who to report to.
- Discusses specific rules of the location.
- Outlines emergency procedures, such as fire alarms, extinguishers, exits, first aid, and telephone
- Outlines the evacuation plan.
- Reminders that if injury/hazards are seen, then report to first aid immediately.
To achieve safety goals, the safety meeting checklist should include the full contact details of location personnel, what hazards exist, the actions to be taken, and who is responsible for each item on the list. See a template safety meeting checklist in the Student Resources section at the end of the chapter.
Safe working zones, the rules of the location (e.g., no entry to a certain area in the location), and emergency procedures and evacuation plans should also be discussed. I insist all student productions bring a fire blanket and a first aid kit to their locations. They should make a record of any risk assessment to ensure the students are clear on how to stay safe and can save time during the shoot.
In addition, safety meetings should be conducted when
- production moves to a new location,
- there is a significant change in cast and/or crew,
- stunts or special effects are scheduled or have changed,
- fatigue is a concern, or
- there are significant changes to the original plan for the day.
To complement the safety meeting, the previously distributed call sheet should also include the contact details (phone number, full address) of the nearest emergency room, a “doc in the box” facility (walk-in clinic or urgent care), and a pharmacy. Although most people have GPS on their phones, a printed-out map and directions to these facilities should also be included in the production notebook for reference.
For more safety guidance, refer to the Safety Bulletins prepared by the Labor Management Safety Committee for the Motion Picture and Television Industry. These bulletins cover every conceivable hazard (e.g., firearms, fog machines, poisonous plants and reptiles, railroad safety, water hazards) and the best procedures to follow for each. I recommend they be attached to call sheets so personnel can peruse them ahead of the daily safety meetings. There are also information fact sheets, including a general code of safe practices that contains a succinct summary of general safety on set that all personnel should review on a regular basis.
Additionally, every production should have a fully stocked first aid kit. This kit should include:
- emergency first aid guide
- breathing barrier (with one-way valve)
- tourniquet
- adhesive bandages (assorted sizes)
- sterilize gauze pads (of diverse sizes)
- wraps, various sizes (securing bandages/wound dressings)
- absorbent compresses (assorted sizes)
- instant cold compress
- adhesive tape
- antibiotic ointment
- antiseptic wipes
- disposable gloves (non-latex)
- tweezers
- scissors
- eyewash kit for particle debris
- hydrocortisone ointment (topical for allergic reactions)
- aspirin and/or ibuprofen (pain relief and inflammation reduction)
- antacid (heartburn and indigestion relief)
- Benadryl (antihistamine for allergic reactions, will cause drowsiness).
Close up
Emergency Protocols
Unfortunately, even when following safety protocols and procedures, emergencies may still occur. Before I became a filmmaker, I was a Registered Nurse. I have had my full share of unexpected emergencies throughout the years, including car accidents, seizures, heart attacks (one on a plane in South Africa!), head injuries, and a drowning (small boy at a swimming pool). Hopefully you will never have to deal with any of these life-threatening events, but regardless of the type of emergency occurring on a production, people are not replaceable, so if something occurs that is not safe is imperative to:
- Stop what you are doing.
- Call 911 immediately for a life-threatening event.
- Report to the safety officer/1st AD as soon as possible.
- Inform your instructor as soon as possible.
Dressing for Safety
Wearing and bringing appropriate clothing to set is an important first step to ensure your own safety. Long hair should be tied up, jewelry should be avoided, and scarves secured. Open-toed footwear can lead to abrasions and damage by cold or hot conditions. Hard, rubber-soled, closed footwear can help prevent this along with metatarsal bruises, breaks, general foot damage, and electrocution. Heavy boots are desirable as they are durable and can give the legs and feet good support. Long trousers are best as they can prevent skin abrasions, provide coverage for hot and wintry weather, and help prevent bug bites or worse. Having multiple layers is also highly recommended, as they can be added or removed according to the weather conditions and terrain.
Invest in a pair of heavy-duty leather gloves that protect your hands from burns (never touch a hot light without them), jagged edges, or worse. Using blankets and hand warmers can be used for colder temperatures. A sun hat for shade or a cozy hat for chilly weather should be used. Sunglasses and/or snow goggles should be with you depending on the weather. Flash burns can occur in the snow and are very unpleasant. A waterproof coat with a hood and an umbrella is also recommended in case of rain. Whilst on location, I had a student who had severe pellebaphobia (fear of umbrellas). He had to remain in the car until the rain had passed. If conditions are going to be extreme, such as freezing or boiling, then clothing must be suitable for this type of weather.
I was a cameraperson for a documentary in Norway during November many years ago. It was below freezing with a bone-chilling wind, and we were standing on a corner for several hours after midnight. I was clad in my second-hand sheepskin coat that I had procured from an Army and Navy surplus store. It was worn by a fighter pilot in WWII (complete with oxygen piping) and kept me cozy.
Bring sunscreen and water. The National Institute of Health recommends that one person needs to drink around 9-13 cups of water, for a female and a male, respectively.[1] Of course, this is only in normal situations. Strenuous work, heat, cold, and size of person also make a difference. So, err on the side of caution and drink more. In the interest of saving the planet, bring a recyclable bottle. For some student productions, funding may not be available for catering, so bringing your own water and food is important. I encourage students to allocate some of their funds to this, as a well-fed and watered crew and cast lead to a happy, more efficient production.
Sleep Deprivation
If you are feeling sleep deprived or taking any medication that can affect your ability to use equipment, notify the 1st AD immediately. The working day should be a maximum of 12 hours with 12 hours of rest. The minimum time for cast and crew to be able to sleep is ten hours (also referred to as “turnaround” time). Traveling to and from the location must be part of the working day. If there are night shoots, you must allow personnel to acclimate to working at night. Block all the night shoots together, preferably at the end of a production, and include a full 24 hours between the shift from day to night and vice versa.
I had a student who suddenly developed a pollen allergy. He took some Benadryl, which causes drowsiness and impaired cognition in many people. Within 45 minutes, the student was dozing off! Needless to say, I sent him home.
Allergies
Emergency issues can arise from allergic responses to a variety of environmental factors: bee stings, food, plants, or even perfumes. It is important, ahead of time, to make note of cast and crew allergies and take measures to prevent this. If someone cannot breathe, call 911 immediately.
Weather & Related Injuries
A projected weather forecast can help the cast and crew prepare appropriate clothing and measures to be taken when needed.
If there are extreme conditions projected, such as thunderstorms, high winds, and snowstorms, then production should be canceled and rescheduled. Sometimes harsh weather can occur unexpectedly, especially wind, rain, and lightning. Do not wait until the drizzle becomes a rainstorm. Using radar and weather apps for real-time data can avoid major inclement weather.
Despite no clouds or rain, lightning can strike from a thunderstorm miles away. Using the 30:30 rule, an estimation of the distance of the lightning strike can be made. You may have done this as a child for fun by spotting the lightning bolt, counting the seconds to when you hear a crack of thunder, and dividing the seconds by five, thus approximating the distance of the storm in miles. If you count to less than 30 seconds from spotting the lightning to hearing the thunder, the lightning is around six miles from your location. You are in danger and must seek shelter immediately. You should not return until 30 minutes have elapsed after seeing the last bolt of lightning or hearing the last thunderclap. However, you should not return until the 1st AD has given the all clear.
Hypothermia
There are five stages of this: mild, moderate, severe, apparent death, and actual death. However, it should never reach even the mild stage. Keep a lookout for anyone who is “umbling,” that is, fumbling, grumbling, mumbling, and stumbling.
Major symptoms of mild hypothermia include:
- shivering
- pale skin
- fast heart rate
- feeling sleepy
- unclear speech
- confusion
- exhaustion
This is an emergency. You need to call 911 immediately. You should also do the following:
- Do not attempt to warm up their arms and legs.
- Do not give them alcohol or cigarettes, as these hinder the rewarming process and put undue stress on the heart and lungs.
- Gently take them to a warmer, dry area.
- Insulate them from a cold surface.
- Remove their wet clothing.
- Cover them with blankets.
- Give them warm, sweet beverages.
You can find out more information on the Centers for Disease Control (CDC) website.[2]
Frostbite
Affecting the skin, this is more common than hypothermia, and often the signs are ignored. It is actual damage to body tissue and cells. Anywhere on the face (cheeks, nose, chin, eyelids), ears, fingers, hands, toes, and feet are most affected first. Indeed, many people do not know they have frostbite until someone notices it. At the early beginning of frostbite, the skin may look red and have some pain. This is the time to get out of the cold and warm up. If the skin looks white, grayish/yellow, unusually hard, or waxy to the touch or is numb, get to a warm place as soon as possible. Do not rub the affected area. Get to a warmer area immediately, be gentle, and use WARM (not hot) water on the affected areas. This is an emergency, and you need to call 911 immediately. See detailed information on the Centers for Disease Control (CDC) website.[3]
Heat Exhaustion
Heat exhaustion is preventable by scheduling shooting for cooler weather (such as early evening), wearing the appropriate clothing, hydrating with cool drinks, and taking adequate rest breaks in a cooler environment. However, when the body overheats, the risk of heat exhaustion is high, especially with a combination of strenuous activity (working on a set) in humid, hot environments. Remember you do not have to be outside for this to happen. Working inside without cooling measures is detrimental to the body.
Heat exhaustion can happen suddenly or gradually, as initially the body tries to cool down by sweating. Without cooling measures and hydration, dehydration quickly occurs. The drop in blood pressure and corresponding fast heart rate lead to dizziness, nausea, headache, muscle cramping, and fainting. If the skin feels damp but the person has goosebumps, this is a positive sign of heat exhaustion.
Take immediate action to stop what you are doing, reach a cooler area (see next paragraph), loosen your clothing, and make sure sweet, cool drinks are taken; sip slowly and do not gulp liquids down. Symptoms should improve within an hour. If they persist, despite treatments, or if they start vomiting, become disoriented, confused, or lose consciousness, this is an emergency, and you need to call 911 immediately. See detailed information on the Centers for Disease Control (CDC) website.[4]
Heat Stroke
This is a medical emergency, and you need to call 911 immediately. When the body can no longer cool down, they show the same symptoms of heat exhaustion, but the body can no longer sweat to cool down. Instead of sweating, the skin feels hot and dry. The core body temperature rises very quickly in under fifteen minutes. Vomiting, confusion, delirium, and seizures leading to coma are an immediate threat to life. Bring them to a cooler place, loosen clothing, pour cool water over the body, and if able to drink, offer sips of cool water. If available, fan the body and put ice packs to groin and armpit areas. If you have access to a cold bath, then immerse them in one immediately. However, to repeat, this is a medical emergency, and you need to call 911 immediately.
Prevention
Please also see clothing in the next section. Always provide a space for cast and crew to take shelter from the elements (hot or cold), either inside a building or an enclosed tent with cooling fans, AC, or heaters. Food and hot or cold drinks should always be available, but especially water, and lots of it.
I was working as a production manager for a low-budget television film. One location was at the height of summer in a sheep-filled field in the English countryside. Two days earlier, I had given a production assistant (PA) enough money to purchase the daily food and water for the cast and crew. I had informed him to have our refreshments by the location at 8 am. We arrived at the location around 7 am, and by 9 am we were hungry and thirsty. No PA. We had no cell phones, drones, or Amazon deliveries in those days, and the nearest call box was 20 miles away. The PA eventually arrived with one small sandwich and a bottle of water!
Fire
Implement SOS before filming occurs. Ensure the evacuation plan is discussed at the safety meeting, and everyone knows where the exit doors are. Do not block any entrance or exit doors. I insist students book a fire blanket from our equipment room and always have it on set. The location of fire extinguishers should also be discussed during the safety meeting, and ensure the cast and crew know how to use them.
Below are important steps to prevent fires:
- Check that all electrical equipment is in working order (e.g., do not use items with bare, bent wires).
- Ensure all cables are taped down.
- Never have liquids (water, coffee, etc.) on set.
- Protect equipment from moisture, especially in humid conditions.
- Do not use flammable materials on lights, e.g., paper, sticky tape, etc.
- Do not have flammable materials, e.g., silks, nets, etc., too close to a light source.
- Never touch a bulb with bare hands because the oil can cause the bulb to explode.
- Do not leave production lights unattended or switched on when not in use.
- Check lights regularly to ensure they are not overheating.
- Check scrims and gels between takes as they can burn.
- Do not remove or block smoke detectors.
- Do not remove, block, or hang items on the fire sprinkling systems.
- When cooking food, do not leave items on the stove unattended.
What to do in case of a fire:
- If you smell or see smoke, stop everything.
- Inform the 1st AD immediately.
- Quickly investigate the source. Sometimes it is just a little speck of dust or an insect on a light, but it could be more serious.
- If in any doubt, call 911 immediately.
- If it is small, throw a fire blanket over the source.
- Call 911 immediately.
- Do not throw water onto electrical fires.
- Use a fire extinguisher on flames, but do not tackle large fires.
- Evacuate immediately. Smoke inhalation from a doused fire is bad for the lungs.
- After evacuation, the 1st AD checks the call sheet to ensure no one is missing.
Common Injuries on a Film Set
Here is a list of the most common injuries and can be avoided with correct measures to reduce the risk of injury:
- tripping hazards (cables, wiring, and ropes on sets)
- falling equipment/props
- electrocution
- vehicle crashes: particularly in the use of helicopters for filming sequences
- injuries from pyrotechnic effects, including explosives and incendiary devices
- insufficient and/or non-existent safety equipment on set
Although it may seem like common sense, often rushing to finish on time is when hazards are missed or people start taking risks. If this starts to happen, it is the 1st AD’s responsibility to take a moment to calm everyone down and remind them: this is only a film. If you feel pressured, try to lighten the workload. Ask yourself, can I cut out some shots or setups to give me the time to get the most essential stuff for the film without panic? Alternatively, can I return the following day to complete the shots?
My students have not used helicopters (yet) on any shoot, but when I was a production manager for a professional production, a famous, tipsy cast member turned up, and I had to cancel the helicopter shot immediately. This was costly and a waste of time as we had to readjust our schedule. My producer was not happy but knew that safety was paramount.
Tripping
Wires and cables should be taped down correctly with gaffer tape, including any cables that cross walkways. Try to run cables as close as possible to the walls. Students should be shown how to do this for efficiency and safety. Lighting should be secured correctly with correct mounting pins and sandbags. Dangling wires should be secured with gaffer tape. Items should not be strewn haphazardly around the set and keep equipment on a level surface to prevent them from falling over. Try to have it organized by department, having a place for everything, and keep it in a handy, secure area nearby. Doorways, including fire exits, should not be blocked, ever! Allow for a few feet of space for people to always be able to easily pass each other. These are your fire lanes. Never block doorways or exits with gear and always create several feet of space for paths of mobility through your set. Do not mishandle equipment. Fingers can get jammed into equipment boxes. Dumping hot lights into kits can cause the wires to melt or even start a fire!
Lifting
Be extremely careful when moving/lifting heavy or dangerous things. This includes props and furniture. Bend the knees when lifting to prevent a slipped disc. Instead of lifting, push items if it is safe to do so. Have someone else help you or use appropriate lifting equipment, but make sure you know how to use the lifting equipment first!
When you are carrying equipment, warn cast and crew members that you are coming. Clearly and loudly, call out “points coming through!” or “points!” If you cannot remember this, just use “watch out!”
Never bring food and liquids onto a set. Eat and drink during breaks in an area away from the set. Never leave liquid containers open, nor put food and liquids onto equipment or equipment carts.
Camera Risks
Never leave a camera unattended (or any other equipment for that matter). These can be very heavy, so having a helping hand is important. If you are transporting the camera on set, use “cam on the move!” or “moving cam!” Utilizing a sandbag on a flat spreader can stop the camera from inadvertently tipping over. For walking shots, ensure the camera operator and cast members are comfortable with the route and that there are no obstacles in the way. If the camera operator needs to walk backwards, there should be an assistant (spotter or an assistant camera person) to guide them, and practicing this first is important. If a shot is up high or near the edge of something, extreme caution needs to be taken. Does the shot have to be taken from a precarious position? Can you do it somewhere safer? Also take into consideration how your position might appear to passersby–a crew member partially hidden or in a precarious position could lead to a police callout.
A few years ago, one of my groups of senior students was filming near the harbor. They had obtained permission and had informed the local police. It was a zombie horror genre, and they had a transparent plastic bag with bloodied, dummy arms and legs. A passerby called the police in a panic, saying there had been a murder! Needless to say, the police confirmed that it was a student production; they had permission, and the limbs were fake.
Sound and Boom Operation
When performing audio work, being aware of surroundings is important. Sound operators need to collaborate with the other crew and cast for each shot. Discussing the best place to situate themselves to perform their jobs efficiently and develop plans to install microphones if boom operation is impractical. Be careful when moving the boom pole, checking overhead and around before changing pole position. If sessions are lengthy, then ear fatigue can easily set in. In general, you should consider taking a ten minute break every hour to give your ears some relief. If the boom operator must hold it for over fifteen minutes, they should remind the 1st AD they need a break.
Poor Visibility
Always inform everyone on the set when the house lights are going to be switched off (lights for visibility that are not production-related). Do the same when turning them back on. You should never leave the cast and crew in darkness without first informing them. If there is a corridor to be used as a passageway, make sure there is some form of lighting in place.
When filming after sundown or in dark locations, everyone should use a flashlight, headlights, or similar items for visibility. Unless there are plenty of phone chargers on hand, using cell phones for lighting is not a good idea, since cell phones are important for emergency needs.
Equipment and cables need to be very carefully set down, taped, etc., in the dark since it is too easy to trip over or lose items. Work lights should be used, even when loading and unloading. These should always be pointed down onto the work area so as not to blind people. Reflective vests should be worn for crew if they are beside traffic with their work zones signposted with road cones or hazard triangles. Do not skip these important safety measures.
Electrocution
All crew should wear rubber-soled footwear. The gaffer and best boy should always make an electrical plan of the location ahead of shooting. The location scout should also be in attendance, as knowing where and how to access the circuit breaker is the first step. Taking an inventory of all the electrical outlets, the possible circuits, determining how many lights will be used, and where stingers (extension cords) will be placed are all part of this electrical management plan. Always make sure the load is appropriate for the location. Use the West Virginia Formula to accurately account for wattage, voltage, and amperage for electrical load (see more in Chapter 3, Electricity). If you are outside the U.S., research the country’s voltage system. For example, the UK’s standard voltage is 220-230, whereas the USA is only 110 volts. Even plugging in a cell phone requires an adapter in Europe.
Around fifteen years ago we were on an exterior night shoot on the USS Yorktown aircraft carrier during a cold fall evening in Charleston, SC. Many hours had been spent setting up all the lights. We were about to conduct our first shot when the PA shouted out, “I am going to make coffee.” Before I could shout “stop!” she had plugged in the coffee machine, and all the lights on the ship went out. Those few extra watts had tripped the breakers. Remember that other departments should use their own circuits outside of the shooting area, and they should ask the gaffer if they can use a different area first.
Never put bare fingers, water, paper, sticky tape, or similar flammable items on a light. Do not put items into a live socket, including fingers, screwdrivers, scissors, etc. Never remove a plug by yanking it out with the cable. Remove it using the plug instead. Never use a lighting instrument that shows bare and/or frayed wires. Always switch a light off at the source, at the head, before unplugging it from the socket. When plugging in a light, always ensure it is switched off first. Always use heavy-duty gloves when dealing with lights. Please also see the Chapter 3, Electricity section on safety.
Environmental Issues
Power sources (like computers, battery chargers) and all lighting equipment should not be used near water. Be aware of puddles or similar areas that have standing water. Equipment must be as far away as possible if you are working close to water, e.g., swimming pools. The cable connections need to be elevated, covered, and run into Ground Fault Current Interrupter (GFCI) outlets. Examples of these are found in bathrooms and kitchens, and it is easy to purchase plugs or GFCI extension cords.
Filming near or on sand can be a lot of bother as it can get everywhere, even when there is no wind. Camera equipment is extremely sensitive, so ensure these items are not exposed to this type of environment for long. Cover items with trash bags, tarps, or plastic covers to protect everything as best as possible.
Tools and Specialist Equipment
When using hand or power tools, make sure you are qualified to do so, and all equipment is in proper working order with all the protective guards in place. Talk with your instructor if you are unfamiliar with the equipment, have any questions, or feel that you need additional training. Jibs, cranes, dollies, tracking, and generators are dangerous in inexperienced hands.
Ladders
It is mandatory to have two crew members, the operator and the guard, when using ladders. The guard ensures that no one bumps the ladder while it is in use. It should be on a level surface, so it does not topple over, and the guard can hold it steady as an extra measure. Never put a ladder on top of another platform, such as a table. Do not put your body outside the confines of the ladder (for example, leaning over) as the danger of tipping over or falling is real. Do not exceed the top two steps. A ladder is only for climbing, so never leave items (cups, tools, etc.) on top of the ladder. Always look out for people who are above or below you. Do not use a ladder that is in disrepair.
Vehicles
No one should try to drive home if they are overtired. However, this is extremely important if you are a camera operator. Not only are you tired, but your ability to judge spatial distances is impaired from looking through a viewfinder or diopter cup all day. Do not drive home after a long day of filming; make sure someone can drive you home.
Several years ago, I had a friend who had been working a sixteen-hour day as a camera operator. The police stopped him on the highway, saying he was veering over the road. He admitted he had been working long hours on a set. He received a fine for reckless driving and points on his license.
Moving car shots should only be done if it is necessary. The director, 1st AD and location scout should procure appropriate safe driving locations and the necessary location permits. Informing the police should always be done. It is also essential for drivers to obtain the correct driving license and insurance, (particularly regarding liability and accidental coverage) pertaining to whatever state/country you are in. Ensure you are well versed on the rules for using cars for film and any additional precautions that are required. The Industry Wide Labor Management Safety Committee bulletin # 8 is on their website for additional guidelines.
Individual Responsibility & Professional Behavior
Safety on a set is paramount, and film production personnel take this very seriously. The law holds companies to a duty of care, but everyone is responsible for their own safety and that of their colleagues. If someone sees an accident waiting to happen and does nothing to try to stop it, they can be held responsible along with their supervisors.
Filming is demanding work but lots of fun too. However, having fun does not mean carelessness, rudeness, or unprofessional behavior. Never run and do not sit down. Sitting down sends a poor message. If you have nothing to do, then be on alert, watch, and learn. Do not point (remember the saying it is rude to point?). Use the correct jargon to communicate and use an open hand. Be professional, especially when it comes to intimate shots (review the Intimacy Coordination Guide) and treating each other, and yourself, with respect.
Unprofessional behavior is related to rules for dismissal (review your Rules for Dismissal). Do not partake in alcohol or take drugs during a production—ever. Alcohol promotes the risk of dehydration, leading to fatigue, confusion, and short-term memory loss. Consequently, being under the influence is detrimental to yourself and those around you. It only takes one lapse in judgment, and you or someone else can be injured or worse. This rule includes having a hangover. I worked with Sir David Frost on a program in the UK. We had a young cast member who arrived late as he had been partying all night. Despite the make-up artist’s best attempts, she could not disguise his hungover complexion. His first performance was less than stellar, and he was fired.
In summary, everyone should familiarize themselves with the general codes of safety. The 1st AD and relevant heads of department should discuss hazards, conduct and record risk assessments, and conduct regular safety meetings to ensure people are clear on how to stay safe. The 1st AD should do a walk-through of each location prior to filming. Cast and crew should pay attention during the safety meetings. Everyone should listen to each other, follow the chain of command, look after equipment properly, and avoid rushing. If you see something hazardous, make sure you report it to the 1st AD immediately. If everyone on a set is on constant alert for hazards and follows the measures to prevent risks, then time will be saved with a happy and safe cast and crew.
Chapter Review
Crossword Puzzle
True-False Quiz
Chapter 2 Student Resources
| Resource Title | Link to resource | Alternate format |
|---|---|---|
| Lightning Safety | ||
| Fog & Haze Safety Bulletin | ||
| Risk Assessment Template | Google Doc (this link will prompt you to make a copy) | Google Doc (view only) |
| Safety Checklist Template | Google Doc (this link will prompt you to make a copy) | Google Doc (view only) |
| Safety Awareness Bulletin | ||
| Location Agreement Template | Google Doc (this link will prompt you to make a copy) | Google Doc (view only) |
| Simple Call Sheet Template | Google Doc (this link will prompt you to make a copy) | Google Doc (view only) |
| Rules for Dismissal | ||
| Intimacy Coordination Guide | Source | |
| Safety Committee for the Motion Picture and Television Industry |
www.csatf.org | |
| CSATF General Code of Safe Practices | www.csatf.org | |
| The Industry Wide Labor Management Safety Committee bulletin # 8 | www.csatf.org |
Media Attributions
- Safety Icon © Nick Youngson adapted by Alpha Stock Images is licensed under a CC BY-SA (Attribution ShareAlike) license
- Duh! © Nicholas Smith
- Police Officer on Set © Nicholas Smith
- Staging Area © Nicholas Smith
- Set Etiquette © Nicholas Smith
- Safety Meeting © Nicholas Smith
- First AD © Nicholas Smith
- Emergency Icon © Nick Youngson is licensed under a CC BY-SA (Attribution ShareAlike) license
- Incorrect Clothing © Nicholas Smith
- Water Icon is licensed under a CC0 (Creative Commons Zero) license
- Penguin Cartoon © Sam Mackintosh-Smith
- Tent for Shade © Nicholas Smith
- Fire Extinguisher is licensed under a CC0 (Creative Commons Zero) license
- Fire Sprinkler © Scott Brody is licensed under a CC BY-SA (Attribution ShareAlike) license
- Lifting Props is licensed under a Public Domain license
- Assistant Camera Person © Nicholas Smith
- Sound and Boom Shots © Nicholas Smith
- Dark Light Shot © Nicholas Smith
- Electrocution Sign is licensed under a CC BY (Attribution) license
- Gloves © Ros Smith
- White Sands © Johannes Bockwoldt
- Jib © Nicholas Smith
- Car Shot 1 © Nicholas Smith
- Car Shot 2 © Nicholas Smith
- Camera Operator © Nicholas Smith
- Messing Around © Nicholas Smith
- Make-Up Artist © Roslin Smith
- NIH. “Hydrating for Health.” News in Health, May 2023 https://newsinhealth.nih.gov/2023/05/hydrating-health Accessed 22 May 2026 1.02: Safety on Set (SOS)#return-footnote-694-1
- CDC. “Preventing Hypothermia.” Winter Weather, 7 February 2024, https://www.cdc.gov/winter-weather/p...ion/index.html. Accessed 22 May 2026 1.02: Safety on Set (SOS)#return-footnote-694-2
- CDC. “Preventing Frostbite.” Winter Weather, 6 February 2024, https://www.cdc.gov/winter-weather/p...frostbite.html. Accessed 22 May 2026. 1.02: Safety on Set (SOS)#return-footnote-694-3
- CDC. “Symptoms of Heat-Related Illnesses.” Extreme Heat, 15 May 2024, https://www.cdc.gov/heat-health/about/index.html. Accessed 22 May 2026. 1.02: Safety on Set (SOS)#return-footnote-694-4
This page titled Chapter 2: Safety on Set (SOS) was last modified on Mon, 26 Oct 2026 17:17:01 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Roslin Smith via source content that was edited to the style and standards of the LibreTexts platform.
The book could not be loaded just now.