6.1: Thermodynamic and Chemical Evolution of Working Fluids

Aircraft Engine: Design and Analysis · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    6.1: Thermodynamic and Chemical Evolution of Working Fluids

    The thermodynamic and state relationships connecting the unburned mixture (subscript \(u\) ) and the burned mixture (subscript \(b\)) are defined using a two-zone thermodynamic framework.

    1. Mass and Mass Fraction Conservation

    At any point during the combustion process (or across the flame front), the total cylinder mass \(m\) is divided into unburned and burned masses:

    \[m=m_u+m_b \nonumber \]

    Defining the burned mass fraction as \(x=\dfrac{m_b}{m}\) and the unburned mass fraction as

    \[\left(1-x\right)=\dfrac{m_u}{m} \nonumber \]

    \[m_u=\left(1-x\right)m\qquad \mathrm{and}\qquad m_b=x m \nonumber \]

    If residual exhaust gas from the previous cycle is present, the initial unburned mixture mass fraction is further related to the residual mass fraction \(x_r\) (or \(f_r\)):

    \[x_r=\dfrac{m_r}{m} \nonumber \]

    \[m_u=m_{\mathrm{fresh}}+m_r=\left(1-x_r\right)m+x_rm \nonumber \]

    2. Volume, Specific Volume, and Density Relations

    The total instantaneous cylinder volume \(V\left(\theta \right)\) at crank angle \(\theta\) is the sum of the partial volumes of the two zones:

    \[V=V_u+V_b=m_uv_u+m_bv_b \nonumber \]

    Dividing by total mass \(m\) gives the overall average specific volume \(v\):

    \[v=\left(1-x\right)v_u+x v_b \nonumber \]

    Expressed in terms of densities (\({\rho }_u=1/v_u\) and \({\rho }_b=1/v_b\)):

    \[\dfrac{1}{\rho }=\dfrac{1-x}{{\rho }_u}+\dfrac{x}{{\rho }_b} \nonumber \]

    3. Ideal Gas State Equations across the Pressure-Uniform Boundary

    Heywood assumes that pressure \(P\) is uniform throughout the combustion chamber at any given instant (\(P_u=P_b=P\)). The state equations for both unburned and burned gas zones are:

    \[Pv_u=R_uT_u=\left(\dfrac{R_u}{M_u}\right)T_u \nonumber \]

    \[Pv_b=R_bT_b=\left(\dfrac{R_u}{M_b}\right)T_b \nonumber \]

    Where \(M_u\) and \(M_b\) are the molecular weights of the unburned and burned gases, and \(R_u\) is the universal gas constant.

    Dividing the two equations yields the density/volume transformation ratio across the unburned and burned zones:

    \[\dfrac{v_b}{v_u}=\dfrac{{\rho }_u}{{\rho }_b}=\left(\dfrac{M_u}{M_b}\right)\left(\dfrac{T_b}{T_u}\right) \nonumber \]

    4. Unburned and Burned Mixture Enthalpy and Internal Energy

    The total internal energy \(U\) and total enthalpy \(H\) of the two-zone cylinder contents are weighted by mass fraction:

    \[U=m_uu_u\left(T_u\right)+m_bu_b\left(T_b\right)=m\left[\left(1-x\right)u_u\left(T_u\right)+x u_b\left(T_b\right)\right] \nonumber \]

    \[H=m_uh_u\left(T_u\right)+m_bh_b\left(T_b\right)=m\left[\left(1-x\right)h_u\left(T_u\right)+x h_b\left(T_b\right)\right] \nonumber \]

    Heywood defines absolute specific enthalpy \(h\left(T\right)\) and absolute specific internal energy \(u\left(T\right)\) by including the standard enthalpy/internal energy of formation at reference temperature \(T_0=298.15~\mathrm{K}\):

    \[h_u\left(T_u\right)=h^{\circ }_{f,u}+\int^{T_u}_{T_0}{c_{p,u}}\left(T\right) dT \nonumber \]

    \[h_b\left(T_b\right)=h^{\circ }_{f,b}+\int^{T_b}_{T_0}{c_{p,b}}\left(T\right) dT \nonumber \]

    Where:

    1. \(h^{\circ }_{f,u}\) = Mass-weighted enthalpy of formation of the unburned mixture (air + fuel + residual gas).
    2. \(h^{\circ }_{f,b}\) = Mass-weighted enthalpy of formation of the burned equilibrium products.

    5. First-Law Differential Conservation Equation (Two-Zone Model)

    For an engine cylinder undergoing progressive combustion with work \(dW=P dV\) and heat loss to the walls \(dQ\), Heywood formulates the First Law energy equation as:

    \[dU=dQ-dW \nonumber \]

    \[d\left[m_uu_u+m_bu_b\right]=dQ-P dV \nonumber \]

    Expanding \(d\left(m_uu_u+m_bu_b\right)\) with \(dm_b=-dm_u=m dx\):

    \[m\left(1-x\right)du_u+m x du_b+m\left(u_b-u_u\right)dx=dQ-P dV \nonumber \]

    This equation directly ties the rate of mass burning (\(dx\)) to the energy shift between the unburned state \(u_u\) and burned state \(u_b\).

    6. Adiabatic Flame Temperature Relation (\(T_{b,\mathrm{adiabatic}}\))

    For complete, constant-volume adiabatic combustion (\(dV=0,dQ=0\)) of an unburned charge at \(T_u\) converting entirely into burned gas (\(x=1\)):

    \[u_b\left(T_b\right)=u_u\left(T_u\right) \nonumber \]

    \[h^{\circ }_{f,b}+\int^{T_b}_{T_0}{c_{v,b}}\left(T\right) dT-R_bT_b=h^{\circ }_{f,u}+\int^{T_u}_{T_0}{c_{v,u}}\left(T\right) dT-R_uT_u \nonumber \]

    Solving this equation implicitly yields the adiabatic flame temperature \(T_b\) of the burned mixture from the initial unburned temperature \(T_u\).


    This page titled 6.1: Thermodynamic and Chemical Evolution of Working Fluids was last modified on Wed, 18 Nov 2026 07:22:39 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Haifa El-Sadi.