6: Combustor- Working Fluid and Models of Engine Cycles

Aircraft Engine: Design and Analysis · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    6: Combustor- Working Fluid and Models of Engine Cycles

    • 6.0: Working Fluid Dynamics
      This page discusses the fundamental differences between internal combustion engines and gas turbine engines. Piston engines use a batch process with fuel-air mixtures and near-stoichiometric combustion, while gas turbines continuously compress air and inject fuel at lean ratios. These operational differences affect thermal efficiency and the specific heat ratios of exhaust gases.
    • 6.1: Thermodynamic and Chemical Evolution of Working Fluids
      This page explains the thermodynamics of combustion through a two-zone framework, focusing on mass conservation, volume and density relations, and ideal gas laws. It covers calculations for internal energy and enthalpy of mixtures, introduces a first-law energy equation relating work and heat loss, and addresses the determination of adiabatic flame temperature during complete combustion under specific conditions.
    • 6.2: Thermodynamics Relations for Engine Process
      This page provides a comprehensive overview of thermodynamic analysis in engine cycles, focusing on key parameters like fuel conversion efficiency and mean effective pressure. It examines processes such as compression, combustion, and expansion in various cycles (constant-volume, constant-pressure), along with the roles of residual gases, pressure changes, and work output.
    • 6.3: Problems and References
      This page addresses combustion processes in internal combustion engines, focusing on calculations for specific volume ratios, gas densities, and thermodynamic properties under various conditions. It covers the impact of equivalence ratios on combustion products and evaluates the performance of a stoichiometric isooctane mixture in a constant-volume cycle.


    This page titled 6: Combustor- Working Fluid and Models of Engine Cycles was last modified on Wed, 18 Nov 2026 07:18:31 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by .