Opening the book…
While the core turbine provides the necessary shaft power to run the compressor, the gas exiting station 5 remains highly energetic (\(p_{t5}\), \(T_{t5}\)). By expanding this gas through an additional "power" turbine, shaft power is extracted and delivered through a reduction gearbox (GB) to drive the propeller as seen in Figure 10. Compared to a turbofan, the key benefit of a turboprop engine is its ability to operate at an extraordinarily large bypass ratio, typically between 30 and 100. Propellers convert mechanical shaft power (torque) into propulsive thrust for vehicle motion. Although this text focuses primarily on aircraft propulsion, the underlying aerodynamic and hydrodynamic principles apply equally to marine applications, including surface ships and submarines.
Two primary aerodynamic methodologies govern propeller performance analysis: Momentum (Actuator Disk) Theory and Blade Element Theory. Momentum theory takes a macroscopic approach, treating the propeller as an infinitely thin disk that creates an instantaneous pressure jump within a fluid control volume. By applying global mass, momentum, and energy conservation, it yields fundamental estimates for ideal thrust, power requirements, and slipstream velocities without requiring details about blade geometry. In contrast, Blade Element Theory adopts a local, microscopic approach by dividing each blade into a series of 2D airfoil cross-sections along its radius. We will focus on momentum theory.
Consider an axisymmetric propeller disk in a uniform, incompressible stream (\(ρ=ρ_0\)). The incoming flow has zero swirl, but immediately downstream of the disk, a uniform tangential velocity \(V_{θp'}\) is imparted. Far downstream (Station 1), the flow relaxes to ambient static pressure \(p_0\) with axial velocity \(V_1\) and swirl velocity \(V_{θ1}\). The known parameters: Flight conditions: \(V_0\), \(p_0\), \(ρ_0\), Disk area: \(A_p\), Shaft power: \({\mathcal{P}}_p\), Shaft angular speed: \(ω\), unknown variables: \(A_0,A_1,V_p,V_{θp'},V_1,V_{θ1},p_p,p_{p'}\)
Governing equations are constructed using fundamental conservation laws:
- Continuity:
- Upstream Bernoulli Equation (ignoring radial velocity):
- Downstream Bernoulli Equation (including swirl component \(V_{θp'}\)):
\(V_{θp'}\) is the tangential (swirl) velocity imparted by the rotating blades directly behind the disk, and \(\dfrac{1}{2}ρ_0V^2_{θp'}\) measures the corresponding swirl kinetic energy per unit volume. \(V_θ\) is the tangential (swirl) velocity of the air, measuring its rotational speed around the propeller axis rather than its axial motion along it.
- Axial Linear Momentum Balance:
Here are two ways to rewrite the passage, formatted cleanly with standardized mathematical notation and clear technical transitions.
The static pressure jump across the disk generates propeller thrust acting in the \(-z\) direction, with an equal and opposite reaction force applied to the fluid in the \(+z\) direction. Equation 4.201 assumes that the streamwise integrals of static pressure along the captured streamtube boundaries (upstream and downstream of the disk) are negligible compared to the net propeller thrust. For a more detailed treatment of the underlying assumptions leading to Equation 4.201, see von Mises (1959).
The shaft power absorbed by the propeller (\({\mathcal{P}}_p\)) converts into useful thrust power plus the net rate of kinetic energy imparted to the slipstream between Stations 0 and 1:
\[{\mathcal{P}}_p=F_{\mathrm{prop}}V_0+{\dot{m}}_p\left(\dfrac{V^2_1}{2}+\dfrac{V^2_{θ1}}{2}-\dfrac{V^2_0}{2}\right) \nonumber \]
where the ideal net thrust is defined by the pressure jump across the disk:
\[F_{\mathrm{prop}}=\left(p_{p'}-p_p\right)A_p \nonumber \]
Applying conservation of angular momentum between the disk outlet and far downstream yields two equivalent expressions for shaft torque (\(τ_{\mathrm{prop}}\)) and absorbed shaft power:
\[{\mathcal{P}}_p=ω\cdot τ_{\mathrm{prop}}=ω\int^{r_1}_0{\left(rV_θ\right)}ρ_0V_1\left(2πr dr\right)=\dfrac{2}{3}{\dot{m}}_pω{\overline{V}}_{θ1}r_1 \nonumber \]
\[{\mathcal{P}}_p=ω\cdot τ_{\mathrm{prop}}=ω\int^{r_p}_0{\left(rV_{θp'}\right)}ρ_0V_p\left(2πr dr\right)=\dfrac{2}{3}{\dot{m}}_pω{\overline{V}}_{θp'}r_p \nonumber \]
Here, \({\overline{V}}_{θ1}\) and \({\overline{V}}_{θp'}\) represent the torque-weighted mean swirl velocities far downstream and immediately behind the disk, respectively.
Together, these fundamental conservation principles establish a closed system of eight coupled non-linear equations for the eight flow unknowns. Following Rankine, we can introduce two simplifying approximations to derive an analytical solution:
- Neglect the swirl kinetic energy term in the downstream Bernoulli relation
- Omit the swirl kinetic energy contribution in the global power balance, retaining only axial kinetic energy changes.
The simplified governing equations then reduce to:
\[p_{p'}+\dfrac{1}{2}ρ_0V^2_p\approx p_0+\dfrac{1}{2}ρ_0V^2_1 \nonumber \]
\[{\mathcal{P}}_p\approx F_{\mathrm{prop}}V_0+{\dot{m}}_p\left(\dfrac{V^2_1}{2}-\dfrac{V^2_0}{2}\right) \nonumber \]
\[F_{\mathrm{prop}}\approx ρ_0V_pA_p\left(V_1-V_0\right)\qquad \mathrm{(acting}~\mathrm{in}~\mathrm{the}~-z~\mathrm{forward}~\mathrm{thrust}~\mathrm{direction)} \nonumber \]
Subtracting the upstream Bernoulli relation from the simplified downstream relation yields:
\[p_{p'}-p_p\approx \dfrac{1}{2}ρ_0\left(V^2_1-V^2_0\right)=\dfrac{F_{\mathrm{prop}}}{A_p} \nonumber \]
Substituting \(F_{\mathrm{prop}}/A_p\) yields:
\[V_p\approx \dfrac{1}{2}\left(V_0+V_1\right) \nonumber \]
Under Rankine’s idealizations, the axial flow speed at the propeller plane (\(V_p\)) is simply the arithmetic average of the freestream flight speed (\(V_0\)) and the far-downstream slipstream speed (\(V_1\)). Next, substituting the thrust expression into the energy balance gives:
\[{\mathcal{P}}_p\approx ρ_0V_pA_p\left(V_1-V_0\right)V_0+ρ_0V_pA_p\left(\dfrac{V^2_1-V^2_0}{2}\right) \nonumber \]
Substituting \(V_p\) will reduce the formulation to a single unknown, \(V_1\). Expressing this relationship in terms of the velocity ratio \(V_1/V_0\) yields a cubic equation:
\[\dfrac{{\mathcal{P}}_p}{\left(\dfrac{1}{2}ρ_0V^2_0\right)V_0A_p}=\dfrac{1}{2}{\left(\dfrac{V_1}{V_0}\right)}^3+\dfrac{3}{2}{\left(\dfrac{V_1}{V_0}\right)}^2-\dfrac{1}{2}\left(\dfrac{V_1}{V_0}\right)-\dfrac{3}{2} \nonumber \]
The non-dimensional parameter on the left-hand side composed of known operating values is defined as the propeller power coefficient or power loading, \(C_P\). As expected, the required shaft power vanishes when the velocity ratio \(V_1/V_0\) approaches unity (i.e., when no thrust is produced).
Finally, propeller efficiency (\(η_{\mathrm{prop}}\)) is defined as the ratio of useful thrust power delivered to the total shaft power absorbed:
\[η_{\mathrm{prop}}\equiv \dfrac{F_{\mathrm{prop}}V_0}{{\mathcal{P}}_p} \nonumber \]
Applying the ideal kinetic energy balance across the streamtube yields the classic Froude propulsive efficiency relation:
\[η_p\equiv \dfrac{F_{\mathrm{prop}}V_0}{{\dot{m}}_p\left(\dfrac{V^2_1-V^2_0}{2}\right)}\approx \dfrac{2V_0}{V_0+V_1} \nonumber \]
Note that propeller efficiency (\(η_{\mathrm{prop}}\)) and ideal propulsive efficiency (\(η_p\)) are directly related. In fact, propulsive efficiency represents the theoretical upper limit of propeller efficiency, expressed as:
\[η_{\mathrm{prop}}\equiv \dfrac{F_{\mathrm{prop}}V_0}{{\mathcal{P}}_p}=\left[\dfrac{F_{\mathrm{prop}}V_0}{{\dot{m}}_p\left(\dfrac{V^2_1-V^2_0}{2}\right)}\right]\left[\dfrac{{\dot{m}}_p\left(\dfrac{V^2_1-V^2_0}{2}\right)}{{\mathcal{P}}_p}\right]=η_p\cdot η_L \nonumber \]
where \(η_L\) is the internal (loss) efficiency factor, defined as the ratio of actual kinetic energy added to the fluid stream relative to the absorbed shaft power:
\[η_L\equiv \dfrac{{\dot{m}}_p\left(\dfrac{V^2_1-V^2_0}{2}\right)}{{\mathcal{P}}_p} \nonumber \]
This factor \(η_L\) represents the internal efficiency of the propeller in converting absorbed shaft power into useful kinetic power within the fluid stream.
This page titled 4.5: Turboprop Engine was last modified on Wed, 18 Nov 2026 07:18:32 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Haifa El-Sadi.
The book could not be loaded just now.