1.4: Integral Formulations via Reynolds Transport Theorem (RTT)

Aircraft Engine: Design and Analysis · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    1.4: Integral Formulations via Reynolds Transport Theorem (RTT)

    To evaluate fluid mechanics within a fixed spatial boundary (Eulerian viewpoint) rather than tracking fixed fluid masses (Lagrangian viewpoint), we utilize the Reynolds Transport Theorem. For any extensive property \(B\) and its corresponding intensive property \(\beta =\dfrac{dB}{dm}\), RTT states:

    \[\dfrac{dB_{\mathrm{sys}}}{dt}=\dfrac{\partial }{\partial t}\int_{\mathrm{CV}}{\rho }\beta dV+\int_{\mathrm{CS}}{\rho }\beta \left(\overrightarrow{V}\cdot \hat{n}\right) dA \nonumber \]

    where:

    • \(\mathrm{CV}\) represents the Control Volume.
    • \(\mathrm{CS}\) represents the Control Surface.
    • \(\hat{n}\) is the outward pointing unit normal vector to control surface.
    • \(\overrightarrow{V}\) is the fluid velocity vector relative to the control surface.

    1.5.1 Continuity Equation (Conservation of Mass)

    Setting \(B=m\) (mass) means \(\beta =1\). Since system mass is conserved (\(\dfrac{dm_{\mathrm{sys}}}{dt}=0\)):

    Mass is conserved within a closed system:

    \[\dfrac{dm_{\mathrm{sys}}}{dt}=0 \nonumber \]

    Applying RTT with \(B=m\) and \(\beta =1\):

    \[\dfrac{dm_{\mathrm{sys}}}{dt}=\dfrac{\partial }{\partial t}\int_{\mathrm{CV}}{\rho } dV+\int_{\mathrm{CS}}{\rho }\left(\overrightarrow{V}\cdot \hat{n}\right) dA=0 \nonumber \]

    1. For a steady, one-dimensional stream with a single entrance [GrindEQ__1_] and exit [GrindEQ__2_]: \(\dfrac{\partial }{\partial t}\int_{\mathrm{CV}}{\rho } dV=0\)
    2. \(-{\rho }_1A_1V_1+{\rho }_2A_2V_2=0\)

    1.5.2 Linear Momentum Balance

    Setting \(B=\boldsymbol{\mathrm{P}}=m\boldsymbol{\mathrm{V}}\) (linear momentum) means \(\beta =\boldsymbol{\mathrm{V}}\). By Newton’s Second Law (\(\dfrac{d{\boldsymbol{\mathrm{P}}}_{\mathrm{sys}}}{dt}={\boldsymbol{\mathrm{F}}}_{\mathrm{net}}\)):

    The rate of change of linear momentum equals the sum of external forces acting on the system:\(\dfrac{d{\overrightarrow{P}}_{\mathrm{sys}}}{dt}=\sum{\overrightarrow{F}}\)

    Applying RTT with \(B=\overrightarrow{P}\) and \(\beta =\overrightarrow{V}\):

    \[\sum{\overrightarrow{F}}=\dfrac{\partial }{\partial t}\int_{\mathrm{CV}}{\rho }\overrightarrow{V} dV+\int_{\mathrm{CS}}{\rho }\overrightarrow{V}\left(\overrightarrow{V}\cdot \hat{n}\right) dA \nonumber \]

    For steady (\(\dfrac{\partial }{\partial t}=0\)) and 1D entry/exit:

    \[\sum{\overrightarrow{F}}=\dot{m}\left({\overrightarrow{V}}_2-{\overrightarrow{V}}_1\right) \nonumber \]

    Accounting for pressure and wall shear forces along the primary flow axis:

    \[P_1A_1-P_2A_2+F_{\mathrm{net,}~\mathrm{wall}}=\dot{m}\left(V_2-V_1\right) \nonumber \]

    1.5.3 Conservation of Energy

    Setting \(B=E\) (total energy) means \(\beta =e=u+\dfrac{V^2}{2}+gz\). By the First Law of Thermodynamics (\(\dfrac{dE_{\mathrm{sys}}}{dt}=\dot{Q}-\dot{W}\)):

    Applying RTT with \(B=E\) and \(\beta =e\):

    \[\dot{Q}-\dot{W}=\dfrac{\partial }{\partial t}\int_{\mathrm{CV}}{\rho }e dV+\int_{\mathrm{CS}}{\rho }e\left(\overrightarrow{V}\cdot \hat{n}\right) dA \nonumber \]

    Splitting work into shaft work (W ̇_"shaft" ) and pressure flow work (W ̇_"flow" ), and using specific enthalpy h=u+P/\(\rhoup\):

    \[ {\dot{W}}_{\mathrm{flow}}=\int_{\mathrm{CS}}{P}\left(\overrightarrow{V}\cdot \hat{n}\right) dA \nonumber \]

    \[\dot{Q}-{\dot{W}}_{\mathrm{shaft}}=\dfrac{\partial }{\partial t}\int_{\mathrm{CV}}{\rho }e dV+\int_{\mathrm{CS}}{\left(e+\dfrac{P}{\rho }\right)}\rho \left(\overrightarrow{V}\cdot \hat{n}\right) dA \nonumber \]

    Replacing \(e=u+\dfrac{V^2}{2}+gz\) and using specific enthalpy \(h=u+\dfrac{P}{\rho }=u+Pv\):

    \[\dot{Q}-{\dot{W}}_{\mathrm{shaft}}=\dfrac{\partial }{\partial t}\int_{\mathrm{CV}}{\rho }e dV+\int_{\mathrm{CS}}{\left(h+\dfrac{V^2}{2}+gz\right)}\rho \left(\overrightarrow{V}\cdot \hat{n}\right) dA \nonumber \]

    For steady, adiabatic (\(\dot{Q}=0\)), no shaft work (\({\dot{W}}_{\mathrm{shaft}}=0\)), and negligible elevation changes (\(\mathrm{\Delta }z\approx 0\)):

    \[0=\dot{m}\left(h_2+\dfrac{V^2_2}{2}\right)-\dot{m}\left(h_1+\dfrac{V^2_1}{2}\right) \nonumber \]

    \[h_1+\dfrac{V^2_1}{2}=h_2+\dfrac{V^2_2}{2}=h_0=\mathrm{constant} \nonumber \]

    Where \(h_0\) is defined as the total enthalpy or stagnation enthalpy of the flow.


    This page titled 1.4: Integral Formulations via Reynolds Transport Theorem (RTT) was last modified on Wed, 18 Nov 2026 07:18:38 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Haifa El-Sadi.