1.3: Isentropic Relations

Aircraft Engine: Design and Analysis · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    1.3: Isentropic Relations

    If a flow process is both adiabatic (\(q=0\)) and frictionless (reversible), it is defined as isentropic (\(s_2-s_1=0\)).

    Setting entropy change to zero in the \(T ds\) equations give:

    \[0=C_v{\mathrm{ln} \left(\dfrac{T_2}{T_1}\right)}+R{\mathrm{ln} \left(\dfrac{v_2}{v_1}\right)} \nonumber \]

    \[0=C_p{\mathrm{ln} \left(\dfrac{T_2}{T_1}\right)}-R{\mathrm{ln} \left(\dfrac{P_2}{P_1}\right)} \nonumber \]

    Manipulating these expressions through the relations \(R=C_p-C_v\) and \(k=C_p/C_v\) leads directly to the standard isentropic state relations:

    \[\dfrac{P_2}{P_1}={\left(\dfrac{T_2}{T_1}\right)}^{\dfrac{k}{k-1}} \nonumber \]

    \[\dfrac{T_2}{T_1}={\left(\dfrac{{\rho }_2}{{\rho }_1}\right)}^{k-1} \nonumber \]

    Where \(\rho =\dfrac{1}{v}\) is the fluid density.


    This page titled 1.3: Isentropic Relations was last modified on Wed, 18 Nov 2026 07:18:38 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Haifa El-Sadi.