Opening the book…
In radial-flow systems, fluid flow moves perpendicular to the rotational axis, directed outward from or inward toward the center.
Centrifugal (Radial) Compressors
For radial compressors, air enters axially at the intake ("impeller eye") and is accelerated outward radially by a high-speed rotating impeller, then slowed down in a stationary diffuser to build static pressure. It achieves a high-pressure ratio in a single stage and is robust against foreign object damage (FOD), but features a larger frontal cross-section. Radial compressors are common in smaller aircraft engines (turboprops, auxiliary power units [APUs], helicopters) and engine starters.
Radial Turbines
For a radial turbine, hot exhaust gas enters radially around the outer diameter and flows inward toward the axis, expanding as it turns to exit axially. It has a simple design, is compact, and is effective for low mass flow applications, though less efficient at high flow rates compared to axial counterparts. It is widely used in automotive turbochargers, small gas turbine APUs, and industrial microturbines.
Mixed-Flow Configurations
Mixed flow combines features of both axial and radial machinery, where the flow exits at an angle between \(0^{\circ }\) (axial) and \({90}^{\circ }\) (radial). It offers a compromise—higher flow capacity than a purely radial design with a higher pressure rise per stage than a single axial stage. It is used in selected specialized small turboshaft or turboprop engines seeking high efficiency in compact spaces.
This page titled 5.2: Radial / Centrifugal Turbomachinery was last modified on Wed, 18 Nov 2026 07:18:36 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by .
The book could not be loaded just now.