5.1: Axial-Flow Turbomachinery

Aircraft Engine: Design and Analysis · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    5.1: Axial-Flow Turbomachinery

    In axial-flow compressors and turbines, fluid flows parallel to the engine’s central axis of rotation. Axial compressors consist of alternating rows of rotating blades (rotors) and stationary blades (stators). Rotors add kinetic energy to the air, while stators convert that velocity into static pressure. On the other hand, axial compressor offers high mass flow rates, small frontal areas (reducing aerodynamic drag), and high-pressure ratios across multiple stages. The axial compressor is used for modern commercial jetliners and military fighters where high thrust and high aerodynamic efficiency are critical.

    For an axial turbine, high-energy gas enters stationary nozzles (vanes) that accelerate the flow and direct it onto rotating turbine blades, transferring mechanical torque to the drive shaft. The axial turbine is highly efficient at handling large mass flows and can be designed with multiple stages (such as Low-Pressure and High-Pressure turbines) to drive different spools. It is used in all large aviation engines to power the compressor stages, intake fans, and external propellers or rotors. Figure 1 shows the axial compressor blade row.

    image1.png

    Figure 1. Axial compressor blade row (AI creation)

    Velocity Angles (Measured relative to the axial direction):

    • \(\alpha\): Absolute gas angle either into or out of the blades
    • \(\chi\): blade metal angle

    The total flow deflection (\(\epsilon\)) produced by a blade row and it is the total turn bend the air stream undergoes as it passes through the blade row. It is the difference between the gas inlet angle and the gas outlet angle (\(\epsilon ={\alpha }_1-{\alpha }_2\)).

    The incidence angle (\(i\)) is defined as the difference between the gas inlet angle and the blade metal inlet angle (\(i={\alpha }_1-{\chi }_1\)). The incidence measures how accurately the incoming air stream aligns with the physical leading edge of the blade.

    Conversely, the difference between the gas outlet angle and the blade metal outlet angle is defined as the deviation angle (\(\delta ={\alpha }_2-{\chi }_2\)). Deviation measures the failure of the gas flow to leave the blade row perfectly parallel to the physical trailing edge metal angle. Deviation depends primarily on blade row geometry, inlet Mach number (\(Ma\)), and incidence (\(i\)).

    An axial compressor stage consists of a rotating Rotor followed by a stationary Stator. The passage between compressor rotor blades acts as a diffusing channel (expanding area relative to flow).

    Core Vector Velocity Equations

    where:

    1. \(\boldsymbol{\mathrm{V}}\) = Absolute fluid velocity vector
    2. \(\boldsymbol{\mathrm{W}}\) = Relative fluid velocity vector
    3. \(\boldsymbol{\mathrm{U}}\) = Tangential blade speed vector

    Axial Velocity Components (\({\boldsymbol{V}}_{\boldsymbol{a}}\))

    The relative flow angles are \({\beta }_1=\chi +i\) at inlet and \({\beta }_2=\chi +\delta\) at outlet, taking \(V_a\) as the axial velocity component perpendicular to the tangential blade speed \(U\):

    1. \[V_{a1}=V_1{\mathrm{cos} \alpha }_1=W_1{\mathrm{cos} \beta }_1 \nonumber \]
    2. \[V_{a2}=V_2{\mathrm{cos} \alpha}_2=W_2{\mathrm{cos} \beta }_2 \nonumber \]

    (For ideal continuous flow across a constant-area annulus, \(V_{a1}=V_{a2}=V_a\).)

    Tangential Velocity Components (\({\boldsymbol{V}}_{\boldsymbol{\theta }},{\boldsymbol{W}}_{\boldsymbol{\theta }}\))

    1. \[V_{\theta 1}=V_1{\mathrm{sin} \alpha }_1=V_{a1}{\mathrm{tan} \alpha }_1 \nonumber \]
    2. \[W_{\theta 1}=W_1{\mathrm{sin} \beta }_1=V_{a1}{\mathrm{tan} \beta }_1 \nonumber \]
    3. \[V_{\theta 2}=V_2{\mathrm{sin} \alpha }_2=V_{a2}{\mathrm{tan} \alpha }_2 \nonumber \]
    4. \[W_{\theta 2}=W_2{\mathrm{sin} \beta }_2=V_{a2}{\mathrm{tan} \beta }_2 \nonumber \]

       

    Tangential Velocity Sums & Blade Speed (\(\boldsymbol{U}\))

    From the geometry of the inlet and outlet velocity triangles:

    1. \[U_1=V_{\theta 1}+W_{\theta 1}=V_{a1}\left({\mathrm{tan} \alpha }_1+{\mathrm{tan} \beta }_1\right) \nonumber \]
    2. \[U_2=V_{\theta 2}+W_{\theta 2}=V_{a2}\left({\mathrm{tan} \alpha }_2+{\mathrm{tan} \beta }_2\right) \nonumber \]

       

    Absolute and Relative Magnitudes

    1. \[V_1=\sqrt{V^2_{a1}+V^2_{\theta 1}}=\frac{V_{a1}}{{{\mathrm{cos} \alpha \ }}_1} \nonumber \]

      \[V_2=\sqrt{V^2_{a2}+V^2_{\theta 2}}=\frac{V_{a2}}{{{\mathrm{cos} \alpha \ }}_2} \nonumber \]

    2. \[W_1=\sqrt{V^2_{a1}+W^2_{\theta 1}}=\frac{V_{a1}}{{{\mathrm{cos} \beta \ }}_1} \nonumber \]

      \[W_2=\sqrt{V^2_{a2}+W^2_{\theta 2}}=\frac{V_{a2}}{{{\mathrm{cos} \beta \ }}_2} \nonumber \]

    The specific torque per unit mass flow rate (\(\tau /\dot{m}\)) acting on or by the rotor is given by as shown in Figure 2:

    \[\tau =\dot{m}\left(r_2V_{\theta 2}-r_1V_{\theta 1}\right) \nonumber \]

    • \(\dot{m}\): Mass flow rate of the fluid (\(\mathrm{kg/s}\))
    • \(r_1,r_2\): Radius at the inlet and outlet stations (\(\mathrm{m}\))
    • \(V_{\theta 1},V_{\theta 2}\): Tangential (whirl) velocity components at inlet and outlet (\(\mathrm{m/s}\))
    image2.png
    Figure 2. hypothetical rotor design (AI creation)

    The power equation is

    \[P=\tau \cdot \omega \nonumber \]

    where:

    • \(P\) = Shaft power
    • \(\tau\) = Mechanical torque generated
    • \(\omega\) = Rotational speed (\(\mathrm{rad/s}\))

    For adiabatic systems with no heat loss (\(q=0\)), the First Law of Thermodynamics dictates that the energy extracted from the fluid must equal the shaft power. Combining this with Euler’s turbomachinery equation gives:

    \[\mathrm{\Delta }h_0=U_2V_{\theta 2}-U_1V_{\theta 1} \nonumber \]

    In an axial compressor stage, the fluid moves primarily in the direction parallel to the shaft axis. For a given blade stage, the mean inlet radius equals the mean outlet radius (\(r_1\approx r_2\)), which means \(U_1=U_2=U\)

    In this case, Euler’s power equation simplifies to:

    \(P=\dot{m}U\left(V_{\theta 2}-V_{\theta 1}\right)\) where \(\mathrm{\Delta }h_0=\ U\left(V_{\theta 2}-V_{\theta 1}\right)\)

    (As gas expands across the turbine rotor passage, relative flow accelerates and is turned sharply toward the axial direction, exerting a driving force on the blade).

    4. Specific Work (Euler Turbomachinery Equation)

    The specific work (\(w\)) transferred between the fluid and the drive shaft is dictated by the change in absolute tangential momentum across the rotor:

    \[w=U\cdot \left(C_{\theta 2}-C_{\theta 1}\right) \nonumber \]

    1. For Compressors (\(w>0\)): Energy is added to the fluid. \(C_{\theta 2}>C_{\theta 1}\), turning the gas flow in the direction of rotor motion.
    2. For Turbines (\(w<0\)): Energy is extracted from the fluid. \(C_{\theta 1}>C_{\theta 2}\), turning the gas flow against the direction of motion to produce torque.
    image3.png
    Figure 1. compressor and turbine stages-AI creation

    This page titled 5.1: Axial-Flow Turbomachinery was last modified on Wed, 18 Nov 2026 07:20:59 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by .