5.0: Introduction

Aircraft Engine: Design and Analysis · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    5.0: Introduction

    The integration of a compressor and turbine into a self-sustaining aircraft engine was achieved almost simultaneously in the late 1930s by two independent inventors: Sir Frank Whittle in Great Britain and Hans von Ohain in Germany. While serving as a Royal Air Force pilot, Whittle patented the concept of linking a compressor to a gas-driven turbine in 1930, successfully running his first experimental engine on a test stand by April 1937. Unaware of Whittle’s work, German physicist Hans von Ohain developed his own turbojet design and secured backing from industrialist Ernst Heinkel, which led to his engine powering the Heinkel He 178 on August 27, 1939—marking the first flight of a jet-powered aircraft in history. Whittle’s engine later made its flight debut aboard the Gloster E.28/39 in May 1941. Shortly thereafter, German engineer Anselm Franz advanced the technology by designing the Junkers Jumo 004, the first mass-produced jet engine to feature an axial compressor and turbine setup, which powered the Messerschmitt Me 262 fighter jet [1].

    Gas turbine engines rely on turbomachinery to pressurize air and extract energy. These components are broadly classified into two major aerodynamic categories: axial-flow and radial-flow (centrifugal).


    This page titled 5.0: Introduction was last modified on Wed, 18 Nov 2026 07:18:36 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by .