14.11: Calibration Verification Qualification and Validation

Quality and Regulatory Compliance in Bioscience · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    14.11: Calibration Verification Qualification and Validation

    Distinguishing measurement and validation activities.pngCalibration establishes a relationship between a measurement indication and reference values under specified conditions, including relevant measurement uncertainty. It may identify bias or support a correction. Adjustment changes the measuring system and is a separate activity, even when performed during the same service visit.

    A calibration report may include results before and after adjustment, often called as-found and as-left results. Not every calibration requires adjustment or a pass/fail decision. A company must assess whether the uncertainty and performance are suitable for the intended measurement.

    Verification provides objective evidence that specified requirements are met. A balance check using a suitable weight or a pipette performance check may be verification activities. Their adequacy depends on the procedure, acceptance criteria, reference, and intended use. Verification does not automatically replace required calibration.

    Qualification documents that facilities, utilities, or equipment are suitable for their intended use. The scope may include design review and installation, operational, and performance qualification. Use qualified personnel and appropriate evidence rather than assuming that a supplier’s initial calibration proves suitability after shipment and installation.

    Validation demonstrates that a process or method is suitable for its intended purpose using scientifically justified evidence. It is not proof of zero error under every imaginable condition. Equipment qualification supports process validation but does not replace it.

    Biotechnology quality activities compared.png

     

     


    This page titled 14.11: Calibration Verification Qualification and Validation was last modified on Sun, 08 Nov 2026 23:43:05 GMT and is shared under a CC BY-SA 4.0 license and was authored, remixed, and/or curated by Emalee MacKenzie.