14.10: Designing a Controlled Manufacturing Process

Quality and Regulatory Compliance in Bioscience · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    14.10: Designing a Controlled Manufacturing Process

    Define the intended product and relevant quality attributes. Identify the endpoint measurements and acceptance criteria that show whether requirements have been met. Establish suitable material specifications and analytical methods.

    Develop process steps through scientifically sound studies, and evaluate how the process changes during scale-up. Assess foreseeable failure modes and identify the parameters and material attributes that affect quality. Establish an appropriate control strategy, including monitoring, limits, response procedures, sampling, and records.

    Provide suitable facilities, utilities, and equipment. Define responsibilities, write and approve necessary procedures, train personnel, and plan qualification and validation. The design must support consistent operation, not only one successful demonstration.

    Document the scientific basis for decisions and update process understanding as evidence grows. Some specifications and controls evolve during development, but changes must be justified and managed appropriately.

    Building quality into biotech process design.png


    This page titled 14.10: Designing a Controlled Manufacturing Process was last modified on Sun, 08 Nov 2026 23:39:28 GMT and is shared under a CC BY-SA 4.0 license and was authored, remixed, and/or curated by Emalee MacKenzie.