Learn · Engineering/Architectural Graphics - Part I - Orthographic Projection

Lecture 24 of 40Unit 5

Projection of a plane inclined to both the reference planes - I

Prof. Avlokita Agrawal · IIT Roorkee

Credits and licence

From
Engineering/Architectural Graphics - Part I - Orthographic Projection, IIT Roorkee (at NPTEL)
Licence
CC BY-NC-SA, as NPTEL states it. Non-commercial use only.
Attribution
NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
Who can watch
Tweens profiles and older. How courses are placed

All the lectures

  1. Introduction to Engineering Graphics Video
  2. Drawing Instruments Video
  3. Sheet Layout and Fixing Sheet Video
  4. Types of Lines and Graphic Symbols Video
  5. Lettering Video
  6. Dimensioning Video
  7. Basic Geometrical Construction Video
  8. Scales Video
  9. Curves used in Engineering Practice: Conic Sections Video
  10. Curves used in Engineering Practice: Cycloids, Trochoids and Involutes Video
  11. Introduction to Orthographic Projection Video
  12. Orthographic Projections - 1st Quadrant Vs 3rd Quadrant Video
  13. Orthographic Projections - Projection of Points Video
  14. Orthographic Projections - Introduction to Projection of Lines Video
  15. Locus of Points Video
  16. Projection of lines parallel to both the reference planes Video
  17. Projection of line parallel to one and perpendicular to another plane Video
  18. Projection of lines inclined to one plane Video
  19. Projection of lines inclined to both the planes Video
  20. Projection of a point and line on auxiliary plane Video
  21. Projection of a plane perpendicular to both the reference planes Video
  22. Projection of a plane perpendicular to one and parallel to another plane Video
  23. Projection of a plane inclined to one and perpendicular to the other plane Video
  24. Projection of a plane inclined to both the reference planes - I Video
  25. Projection of a plane inclined to both the reference planes - II Video
  26. Introduction to types of solids Video
  27. Projection of solids in simple positions Video
  28. Projection of solids with axis inclined to one of the reference planes and parallel to another Video
  29. Projection of solids with axis inclined to both the reference planes Video
  30. Projection of spheres Video
  31. Orthographic Projections Introduction to Sections of Solids Video
  32. Orthographic Projections Sections of Prisms Video
  33. Orthographic Projections Sections of Pyramids Video
  34. Orthographic Projections Sections of Cylinders Video
  35. Orthographic Projections Sections of Cones Video
  36. Orthographic Projections: Sections of Spheres Video
  37. Development of Surfaces - I Video
  38. Development of Surfaces - II Video
  39. Intersection of Surfaces - I Video
  40. Intersection of Surfaces - II Video