Learn · NPTEL

Course12410715740 lectures

Engineering/Architectural Graphics - Part I - Orthographic Projection

Prof. Avlokita Agrawal · IIT Roorkee

Start with lecture 1 At NPTEL

Lectures

Unit 1

  1. Introduction to Engineering Graphics Video
  2. Drawing Instruments Video
  3. Sheet Layout and Fixing Sheet Video
  4. Types of Lines and Graphic Symbols Video
  5. Lettering Video

Unit 2

  1. Dimensioning Video
  2. Basic Geometrical Construction Video
  3. Scales Video
  4. Curves used in Engineering Practice: Conic Sections Video
  5. Curves used in Engineering Practice: Cycloids, Trochoids and Involutes Video

Unit 3

  1. Introduction to Orthographic Projection Video
  2. Orthographic Projections - 1st Quadrant Vs 3rd Quadrant Video
  3. Orthographic Projections - Projection of Points Video
  4. Orthographic Projections - Introduction to Projection of Lines Video
  5. Locus of Points Video

Unit 4

  1. Projection of lines parallel to both the reference planes Video
  2. Projection of line parallel to one and perpendicular to another plane Video
  3. Projection of lines inclined to one plane Video
  4. Projection of lines inclined to both the planes Video
  5. Projection of a point and line on auxiliary plane Video

Unit 5

  1. Projection of a plane perpendicular to both the reference planes Video
  2. Projection of a plane perpendicular to one and parallel to another plane Video
  3. Projection of a plane inclined to one and perpendicular to the other plane Video
  4. Projection of a plane inclined to both the reference planes - I Video
  5. Projection of a plane inclined to both the reference planes - II Video

Unit 6

  1. Introduction to types of solids Video
  2. Projection of solids in simple positions Video
  3. Projection of solids with axis inclined to one of the reference planes and parallel to another Video
  4. Projection of solids with axis inclined to both the reference planes Video
  5. Projection of spheres Video

Unit 7

  1. Orthographic Projections Introduction to Sections of Solids Video
  2. Orthographic Projections Sections of Prisms Video
  3. Orthographic Projections Sections of Pyramids Video
  4. Orthographic Projections Sections of Cylinders Video
  5. Orthographic Projections Sections of Cones Video

Unit 8

  1. Orthographic Projections: Sections of Spheres Video
  2. Development of Surfaces - I Video
  3. Development of Surfaces - II Video
  4. Intersection of Surfaces - I Video
  5. Intersection of Surfaces - II Video

Syllabus and materials

At NPTEL, as the course publishes them.

Credits and licence

Institution
IIT Roorkee
Department
Architecture
Teacher
Prof. Avlokita Agrawal
Level
Undergraduate
Language
English
Subjects
Art, architecture and design
Source
NPTEL
Licence
CC BY-NC-SA, as NPTEL states it. Non-commercial use only. NPTEL's terms
Attribution
NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
Who can watch
NPTEL gives no rating. Invisible Network shows it to Tweens profiles and older, judged from what the source says about it. How courses are placed