Learn · NPTEL

Course11210615441 lectures

Spray Theory

Prof. Mahesh V Panchagnula · IIT Madras

Start with lecture 1 At NPTEL

Lectures

Spray Theory and Applications

  1. Introduction to sprays and their applications Video
  2. Spatial versus Temporal Sampling Video
  3. Spatial Vs Temporal Sampling example problem Video
  4. Steady vs unsteady spray Video
  5. Statistical measures on spray Video
  6. Discussion on pdf and moments Video
  7. Size velocity correlation Video
  8. Discussion on Interfacial tension Video
  9. Introduction to Atomizers and their design-1 Video
  10. Introduction to Atomizers and their design-2 Video
  11. Simple measurement techniques Video
  12. Selection of atomizers Video
  13. Spray measurement characteristics Video
  14. Spray measurements techniques Video
  15. Non-intrusive spray measurements techniques Video
  16. Non-intrusive spray measurements techniques. Video
  17. Linear stability analysis – Introduction Video
  18. Linear stability analysis- Kelvin-Helmhotz instability -1 Video
  19. Linear stability analysis- Kelvin-Helmhotz instability -2 Video
  20. Linear stability analysis- Kelvin-Helmhotz instability -3 Video
  21. Linear stability analysis procedure Video
  22. Linear stability analysis - Cylindrial jet instability-1 Video
  23. Linear stability analysis - Cylindrial jet instability-2 Video
  24. Linear stability analysis - Planar Liquid Sheet instability -1 Video
  25. Linear stability analysis - Planar Liquid Sheet instability -2 Video
  26. Design of pressure swirl atomizer-1 Video
  27. Design of pressure swirl atomizer-2 Video
  28. Design of pressure swirl atomizer-3 Video
  29. Design of pressure swirl atomizer-4 Video
  30. Secondary atomization-Dimensionless parameters Video
  31. Secondary atomization-Modes of breakup-1 Video
  32. Secondary atomization-Modes of breakup-2 Video
  33. Multiphase modelling Video
  34. Multiphase modelling. Video
  35. Multiphase flow modelling basics Video
  36. Multiphase modelling – Selection of model-1 Video
  37. Multiphase modelling – Selection of model-2 Video
  38. Multiphase modelling - Governing equations Video
  39. Droplet evaporation Video
  40. Droplet combustion Video
  41. Spray combustion Video

Syllabus and materials

At NPTEL, as the course publishes them.

Credits and licence

Institution
IIT Madras
Department
Mechanical Engineering
Teacher
Prof. Mahesh V Panchagnula
Level
Undergraduate
Language
English
Subjects
Engineering
Source
NPTEL
Licence
CC BY-NC-SA, as NPTEL states it. Non-commercial use only. NPTEL's terms
Attribution
NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
Who can watch
NPTEL gives no rating. Invisible Network shows it to Tweens profiles and older, judged from what the source says about it. How courses are placed