Course10310622062 lectures
Artificial Lift
Prof. Abdus Samad · IIT Madras
About
The course contains the oil and gas pumping mechanism when the reservoir pressure is low, and it is required to enhance production using artificial means. The wellbore can have liquid loading problems, or fluid can have higher viscosity or corrosive chemicals, and the pumping of such wellbores needs special attention. Through this course, the students will learn different artificial lifts such as sucker rod pumps, electrical submersible pumps, gas lifts etc. After completing the course, the students will be able to size and select an artificial lift for a specific wellbore.
Intended audience: Senior Undergrad or PG Petroleum, Mechanical and Chemical engineering students
Prerequisites: Basic knowledge of fluid mechanics, completed at least 2nd year in Engineering.
Lectures
Week 1
- Introduction to oil and gas
- Drilling and Completion
- Well completion
- Oil and gas production systems
- Pumps, compressors and flow through pipes
- Reservoir fluid
Week 2
- Fluid properties and Phase diagram - Part 1
- Fluid properties and Phase diagram - Part 2
- Nodal analysis
- Reservoir deliverability-Single Phase flow
- Reservoir deliverability-Two Phase flow
- Flow over a flat surface or flow through pipe - Part 1
- Flow over a flat surface or flow through pipe - Part 2
Week 3
- Single-Phase, Multi-Phase-Emulsion
- Emulsification and demulsification
- Single and Multi Phase flow-flow regimes
- Multi phase flow-flow models
- Choke Performance
Week 4
- Pump classifications
- Classification of artificial lifts - Part 1
- Classification of artificial lifts - Part 2
Week 5
Week 6
- Sucker rod pump (SRP) - Part 4
- Sucker rod pump (SRP) - Part 5
- Sucker rod pump (SRP) - Part 6
- SRP-Pump performance analysis - Part 1
- SRP-Pump performance analysis - Part 2
- SRP-Pump performance analysis - Part 3
Week 7
- Introduction to progressive cavity punp
- Progressive cavity Pump - Part 1
- Progressive cavity Pump - Part 2
- Progressive cavity Pump - Part 3
- Progressive cavity Pump - Part 4
- Progressive cavity Pump - Part 5
Week 8
- Electric submersible pump - Part 1
- Electric submersible pump - Part 2
- Electric submersible pump - Part 3
- ESP- basic electrical systems - Part 1
- ESP- basic electrical systems - Part 2
- ESP- basic electrical systems - Part 3
Week 9
- ESP- numerical problems - Part 1
- ESP- numerical problems - Part 2
- ESP- numerical problems - Part 3
- ESP- numerical problems - Part 4
- ESP- numerical problems - Part 5
Week 10
- Gas lift basics - Part 1
- Gas lift basics - Part 2
- Gas lift valves and installartion - Part 1
- Gas lift valves and installartion - Part 2
- Plunger lift and design
Week 11
- Hydraulic jet pump fundamentals - Part 1
- Hydraulic jet pump fundamentals - Part 2
- Hydraulic engine pumps and design - Part 1
- Hydraulic engine pumps and design - Part 2
Week 12
Syllabus and materials
At NPTEL, as the course publishes them.
Credits and licence
- Institution
- IIT Madras
- Department
- Chemical Engineering
- Teacher
- Prof. Abdus Samad
- Level
- Undergraduate
- Language
- English
- Subjects
- Chemistry, Engineering
- Source
- NPTEL
- Licence
- CC BY-NC-SA, as NPTEL states it. Non-commercial use only. NPTEL's terms
- Attribution
- NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
- Who can watch
- NPTEL gives no rating. Invisible Network shows it to Tweens profiles and older, judged from what the source says about it. How courses are placed