Learn · Engineering Metrology

Lecture 1 of 55Week 01

Lecture 1, Introduction to measurements and metrology, Dr Janakarajan Ramkumar

Prof. J. Ramkumar Prof. Amandeep Singh · IIT Kanpur

Credits and licence

From
Engineering Metrology, IIT Kanpur (at NPTEL)
Licence
CC BY-NC-SA, as NPTEL states it. Non-commercial use only.
Attribution
NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
Who can watch
Tweens profiles and older. How courses are placed

All the lectures

  1. Lecture 1, Introduction to measurements and metrology, Dr Janakarajan Ramkumar Video
  2. Lecture 2A, Instruments in measurement systems, Dr Janakarajan Ramkumar Video
  3. Lecture 2B, Instruments in measurement systems, Dr Janakarajan Ramkumar Video
  4. Lecture 3, General concepts and definitions in metrology, Dr Janakarajan Ramkumar Video
  5. Lecture 4, Standards of measurement, Dr Janakarajan Ramkumar Video
  6. Lecture 5, Limits, Fits, and Tolerances (Part 1 of 4), Dr Janakarajan Ramkumar Video
  7. Lecture 7, Limits, Fits, and Tolerances (Part 3 of 4); Dr Janakarajan Ramkumar Video
  8. Lecture 7, Limits, Fits, and Tolerances (Part 3 of 4) Dr Janakarajan Ramkumar Video
  9. Lecture 8, Limits, Fits, and Tolerances (Part 4 of 4) Dr Janakarajan Ramkumar Video
  10. Lecture 9, Linear Measurements (Part 1 of 2); Dr Janakarajan Ramkumar Video
  11. Lecture 10, Linear Measurements (Part 2 of 2); Dr Janakarajan Ramkumar Video
  12. Lecture 11, Laboratory demonstration, Vernier Caliper; Dr Amandeep Singh Video
  13. Lecture 12, Laboratory demonstration, Dial gauge and vernier, micrometer, surface plate, feeler gauge; Dr Amandeep Singh Video
  14. Lecture 14, Angular Measurements (Part 1 of 2); Dr Janakarajan Ramkumar Video
  15. Lecture 15, Angular Measurements (Part 2 of 2); Dr Janakarajan Ramkumar Video
  16. Lecture 16, Laboratory demonstration, Vernier height gauge; Dr Amandeep Singh Video
  17. Lecture 17, Laboratory demonstration, Thread gauge, spirit level; Dr Amandeep Singh Video
  18. Lecture 18, Laboratory demonstration, Combination set, slip gauges, sine bar; Dr Amandeep Singh Video
  19. Lecture 18, Comparators (Part 1 of 2); Dr Janakarajan Ramkumar Video
  20. Lecture 19, Comparators (Part 2 of 2); Dr Janakarajan Ramkumar Video
  21. Lecture 20, Transducers (Part 1 of 2); Dr Janakarajan Ramkumar Video
  22. Lecture 21, Transducers (Part 2 of 2); Dr Janakarajan Ramkumar Video
  23. Lecture 22, Screw thread metrology; Dr Janakarajan Ramkumar Video
  24. Lecture 23, Gears metrology (Part 1 of 2); Dr Janakarajan Ramkumar Video
  25. Lecture 24, Gears metrology (Part 2 of 2); Dr Janakarajan Ramkumar Video
  26. Lecture 25, Laboratory demonstration, Gear Vernier; Dr Amandeep Singh Video
  27. Lecture 26, Surface metrology; Dr Janakarajan Ramkumar Video
  28. Lecture 27, Temperature measurements; Dr Janakarajan Ramkumar Video
  29. Lecture 28, Pressure measurements (Part 1 of 2); Dr Janakarajan Ramkumar Video
  30. Lecture 29, Pressure measurements (Part 2 of 2); Dr Janakarajan Ramkumar Video
  31. Lecture 30, Strain measurements (Part 1 of 2); Dr Janakarajan Ramkumar Video
  32. Lecture 31, Strain measurements (Part 2 of 2); Dr Janakarajan Ramkumar Video
  33. Lecture 32, Optical measurements and Nanometrology (Part 1 of 3); Dr Janakarajan Ramkumar Video
  34. Lecture 33, Optical measurements and Nanometrology (Part 2 of 3); Dr Janakarajan Ramkumar Video
  35. Lecture 34, Optical measurements and Nanometrology (Part 3 of 3); Dr Janakarajan Ramkumar Video
  36. Lecture 35, Statistics in Metrology, an intoduction (Part 1 of 2); Dr Amandeep Singh Video
  37. Lecture 36, Statistics in Metrology, an intoduction (Part 2 of 2); Dr Amandeep Singh Video
  38. Lecture 37, Data and scales in measurements; Dr Amandeep Singh Video
  39. Lecture 38, Discrete and continuous data; Dr Amandeep Singh Video
  40. Lecture 39, Statistics for metrology, fundamental concepts (Part 1 of 3); Dr Amandeep Singh Video
  41. Lecture 40, Statistics for metrology, fundamental concepts (Part 2 of 3); Dr Amandeep Singh Video
  42. Lecture 41, Statistics for metrology, fundamental concepts (Part 3 of 3); Dr Amandeep Singh Video
  43. Lecture 42, Probability distributions for estimating measurement; Dr Amandeep Singh Video
  44. Lecture 43, Normal distribution; Dr Amandeep Singh Video
  45. Lecture 44, Statistics for proportions; Dr Amandeep Singh Video
  46. Lecture 45, Chi square distribution, and Data outlier detection; Dr Amandeep Singh Video
  47. Lecture 46, Quality Control, introduction; Dr Amandeep Singh Video
  48. Lecture 47, Quality Control, control charts for variables; Dr Amandeep Singh Video
  49. Lecture 48, Quality Control, control charts for attributes; Dr Amandeep Singh Video
  50. Lecture 49, Quality Control, critical aspects; Dr Amandeep Singh Video
  51. Lecture 50, 3D measurements, Coordinate Measuring Machine (CMM); Dr Amandeep Singh Video
  52. Lecture 51, Laboratory demonstration, Coordinate Measuring Machine (CMM); Dr Amandeep Singh) Video
  53. Live Session 14-10-2023 Video
  54. Live Session 24-10-2020 Video
  55. Live Session 13-10-2019 Video