Learn · NPTEL

Course11210425055 lectures

Engineering Metrology

Prof. J. Ramkumar Prof. Amandeep Singh · IIT Kanpur

Start with lecture 1 At NPTEL

Lectures

Week 01

  1. Lecture 1, Introduction to measurements and metrology, Dr Janakarajan Ramkumar Video
  2. Lecture 2A, Instruments in measurement systems, Dr Janakarajan Ramkumar Video
  3. Lecture 2B, Instruments in measurement systems, Dr Janakarajan Ramkumar Video
  4. Lecture 3, General concepts and definitions in metrology, Dr Janakarajan Ramkumar Video
  5. Lecture 4, Standards of measurement, Dr Janakarajan Ramkumar Video

Week 02

  1. Lecture 5, Limits, Fits, and Tolerances (Part 1 of 4), Dr Janakarajan Ramkumar Video
  2. Lecture 7, Limits, Fits, and Tolerances (Part 3 of 4); Dr Janakarajan Ramkumar Video
  3. Lecture 7, Limits, Fits, and Tolerances (Part 3 of 4) Dr Janakarajan Ramkumar Video
  4. Lecture 8, Limits, Fits, and Tolerances (Part 4 of 4) Dr Janakarajan Ramkumar Video

Week 03

  1. Lecture 9, Linear Measurements (Part 1 of 2); Dr Janakarajan Ramkumar Video
  2. Lecture 10, Linear Measurements (Part 2 of 2); Dr Janakarajan Ramkumar Video
  3. Lecture 11, Laboratory demonstration, Vernier Caliper; Dr Amandeep Singh Video
  4. Lecture 12, Laboratory demonstration, Dial gauge and vernier, micrometer, surface plate, feeler gauge; Dr Amandeep Singh Video

Week 04

  1. Lecture 14, Angular Measurements (Part 1 of 2); Dr Janakarajan Ramkumar Video
  2. Lecture 15, Angular Measurements (Part 2 of 2); Dr Janakarajan Ramkumar Video
  3. Lecture 16, Laboratory demonstration, Vernier height gauge; Dr Amandeep Singh Video
  4. Lecture 17, Laboratory demonstration, Thread gauge, spirit level; Dr Amandeep Singh Video
  5. Lecture 18, Laboratory demonstration, Combination set, slip gauges, sine bar; Dr Amandeep Singh Video

Week 05

  1. Lecture 18, Comparators (Part 1 of 2); Dr Janakarajan Ramkumar Video
  2. Lecture 19, Comparators (Part 2 of 2); Dr Janakarajan Ramkumar Video
  3. Lecture 20, Transducers (Part 1 of 2); Dr Janakarajan Ramkumar Video
  4. Lecture 21, Transducers (Part 2 of 2); Dr Janakarajan Ramkumar Video

Week 06

  1. Lecture 22, Screw thread metrology; Dr Janakarajan Ramkumar Video
  2. Lecture 23, Gears metrology (Part 1 of 2); Dr Janakarajan Ramkumar Video
  3. Lecture 24, Gears metrology (Part 2 of 2); Dr Janakarajan Ramkumar Video
  4. Lecture 25, Laboratory demonstration, Gear Vernier; Dr Amandeep Singh Video

Week 07

  1. Lecture 26, Surface metrology; Dr Janakarajan Ramkumar Video
  2. Lecture 27, Temperature measurements; Dr Janakarajan Ramkumar Video
  3. Lecture 28, Pressure measurements (Part 1 of 2); Dr Janakarajan Ramkumar Video
  4. Lecture 29, Pressure measurements (Part 2 of 2); Dr Janakarajan Ramkumar Video

Week 08

  1. Lecture 30, Strain measurements (Part 1 of 2); Dr Janakarajan Ramkumar Video
  2. Lecture 31, Strain measurements (Part 2 of 2); Dr Janakarajan Ramkumar Video
  3. Lecture 32, Optical measurements and Nanometrology (Part 1 of 3); Dr Janakarajan Ramkumar Video
  4. Lecture 33, Optical measurements and Nanometrology (Part 2 of 3); Dr Janakarajan Ramkumar Video
  5. Lecture 34, Optical measurements and Nanometrology (Part 3 of 3); Dr Janakarajan Ramkumar Video

Week 09

  1. Lecture 35, Statistics in Metrology, an intoduction (Part 1 of 2); Dr Amandeep Singh Video
  2. Lecture 36, Statistics in Metrology, an intoduction (Part 2 of 2); Dr Amandeep Singh Video
  3. Lecture 37, Data and scales in measurements; Dr Amandeep Singh Video
  4. Lecture 38, Discrete and continuous data; Dr Amandeep Singh Video

Week 10

  1. Lecture 39, Statistics for metrology, fundamental concepts (Part 1 of 3); Dr Amandeep Singh Video
  2. Lecture 40, Statistics for metrology, fundamental concepts (Part 2 of 3); Dr Amandeep Singh Video
  3. Lecture 41, Statistics for metrology, fundamental concepts (Part 3 of 3); Dr Amandeep Singh Video

Week 11

  1. Lecture 42, Probability distributions for estimating measurement; Dr Amandeep Singh Video
  2. Lecture 43, Normal distribution; Dr Amandeep Singh Video
  3. Lecture 44, Statistics for proportions; Dr Amandeep Singh Video
  4. Lecture 45, Chi square distribution, and Data outlier detection; Dr Amandeep Singh Video

Week 12

  1. Lecture 46, Quality Control, introduction; Dr Amandeep Singh Video
  2. Lecture 47, Quality Control, control charts for variables; Dr Amandeep Singh Video
  3. Lecture 48, Quality Control, control charts for attributes; Dr Amandeep Singh Video
  4. Lecture 49, Quality Control, critical aspects; Dr Amandeep Singh Video
  5. Lecture 50, 3D measurements, Coordinate Measuring Machine (CMM); Dr Amandeep Singh Video
  6. Lecture 51, Laboratory demonstration, Coordinate Measuring Machine (CMM); Dr Amandeep Singh) Video

Live Session

  1. Live Session 14-10-2023 Video
  2. Live Session 24-10-2020 Video
  3. Live Session 13-10-2019 Video

Syllabus and materials

At NPTEL, as the course publishes them.

Credits and licence

Institution
IIT Kanpur
Department
Mechanical Engineering
Teacher
Prof. J. Ramkumar Prof. Amandeep Singh
Level
Undergraduate
Language
English
Subjects
Engineering
Source
NPTEL
Licence
CC BY-NC-SA, as NPTEL states it. Non-commercial use only. NPTEL's terms
Attribution
NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
Who can watch
NPTEL gives no rating. Invisible Network shows it to Tweens profiles and older, judged from what the source says about it. How courses are placed