Learn · Manufacturing Process Technology -Part I
Lecture 21 of 48Week 4 - Casting processes - Estimation of solidification time with different conditions and Riser design
Principle of cooling and solidification in single and multiphase systems
Prof. Shantanu Bhattacharya · IIT Kanpur
Credits and licence
- From
- Manufacturing Process Technology -Part I, IIT Kanpur (at NPTEL)
- Licence
- CC BY-NC-SA, as NPTEL states it. Non-commercial use only.
- Attribution
- NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
- Who can watch
- Tweens profiles and older. How courses are placed
All the lectures
- Introduction to Manufacturing Process Technology
- Structure of Matter (Bonding of Solids,Crystal Structures)
- Brief introduction of non-conventional machining processes
- Structure of matters (bonding of solids, crystal structures)
- Elastic and Plastic Deformation
- Crystal imperfaction and dislocation
- Plastic Deformation
- Material Properties , Stress Strain Diagram for differnt types of materials
- Friction and Wear, Solid solutions
- Equilibrium Phase Diagram
- Iron-carbon equilibrium phase diagram
- Control of material properties (Alloying and heat treatment), Mechanical properties and Recrystallization
- Introduction To Casting Process
- Pattern and Mold Design
- Mold Making Procedures
- Fundamentals of Melting and Furnaces & Pouring and Gating Design
- Vertical and Bottom Gating Systems Edit Lesson
- Numerical Estimation To Find Mold Filling Time and Mold Design
- Effects of friction and velocity distribution in time of filling
- Numerical design of gating systems using frictional and bending losses
- Principle of cooling and solidification in single and multiphase systems
- Estimation of rate of solidification
- Principles of cooling and solidification of casting
- Modeling of Solidification Rates of Thin Casting in a Metal Mold
- Solidification with Predominant Interface Resistance
- Solidification with Constant Casting Surface Temperature
- Solidification of Casting with Predominant Resistance in Mold and Solidified Metal
- Solidification Time for Permanent Mold Casting
- Solidification with Constant Casting Surface
- Riser Design and Placement
- Riser Design and Placement Part 2
- Riser Design and Placement Part 3
- Introduction of Machining Processes
- Review of Basic Machining Processes and the Mechanics of Chip Formation
- Estimation of Cutting Ratio and Shear Angle
- Merchant's Force Analysis
- Merchant Theory (Cutting Forces Analysis)
- Merchant Theory (Force analysis) Part-2
- Lee Shaffer's Solution
- Specific Energy Model for Cutting
- Modeling of Heat Generation and Cutting Tool Temperature
- Temperature in Cutting and Builtup Edge Formation
- Metal Cutting Operation
- Tool life and Tool wear
- Economics of Machining
- Joining Process
- Principle of Solid State Welding
- Numerical Design of Welding Power Sources in Arc Welding