8.16: Appendix C

Fluctuations Near Equilibrium · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    8.16: Appendix C

    The thermal noise in electrical circuits is mathematically isomorphic to the Brownian motion of a mechanical oscillator. This relationship is formalized via the Generalized Langevin Equation (GLE), which incorporates memory effects into the dissipation process.

    C.1 The Generalized Langevin Equation

    For a particle of mass \(m\) moving in a potential \(U(x)\), the GLE is given by:

    \[ m \ddot{x}(t)=-\int_{-\infty}^{t} \gamma\left(t-t^{\prime}\right) \dot{x}\left(t^{\prime}\right) d t^{\prime}-\nabla U(x)+F_{p}(t) \tag{8.1} \label{8.1} \]

    where \(\gamma(t)\) is the memory kernel representing friction and \(F_{p}(t)\) is the fluctuating thermal force. The FDT ensures that the power spectral density of the force \(S_{F}(\omega)\) is directly related to the real part of the Fourier-transformed friction \(\tilde{\gamma}(\omega)\) :

    \[ S_{F}(\omega)=2 k_{B} T \operatorname{Re}[\tilde{\gamma}(\omega)] \tag{8.2} \label{8.2} \]

    C.2 Comparison of Systems

    The analogy between the electrical and the mechanical systems are summarized below in Table 8.2, which maps the parameters of the electrical circuits discussed in the main text to their mechanical equivalents. This mapping allows for the translation of circuit results (like low-pass filtering) directly into mechanical contexts (like viscous damping).

    C.3 Visualizing the Analogy

    The correspondence between the LCR circuit and the mechanical oscillator is not merely symbolic but structural. As shown in Figure 3, the mass \(m\) provides inertia (equivalent to inductance \(L\) ), the damper \(\gamma\) provides dissipation (equivalent to resistance \(R\) ), and the spring \(k\) provides the restoring force (equivalent to the inverse capacitance \(1 / C\) ).

    Table \(\PageIndex{2}\): Analogy between Electrical and Mechanical Systems.
    Electrical Parameter Mechanical Equivalent Physical Role
    Voltage \((V)\) Force \((F)\) Driving influence / Fluctuation
    Current \((I)\) Velocity \((v=\dot{x})\) Rate of flow/change
    Charge \((q)\) Displacement \((x)\) State variable
    Resistance \((R)\) Friction coefficient \((\gamma)\) Dissipation (Energy loss)
    Inductance \((L)\) Mass \((m)\) Inertia (Kinetic energy storage)
    Capacitance \((C)\) Compliance \((1 / k)\) Potential energy storage
    Impedance \((Z)\) Mechanical Impedance ( \(Z_{m}\) ) Ratio of Force to Velocity

    78b99fe6-dd4f-499e-8190-ab4a68ee9fee-071.jpgheight610ampwidth746amptop_left_y784amptop_left_x666

    Figure \(\PageIndex{3}\): Top: Mechanical mass-spring-damper system. Bottom: The equivalent series LCR circuit. The stochastic terms ( \(F_{p}\) and \(V_{n}\) ) represent the external driving force and voltage respectively


    This page titled 8.16: Appendix C was last modified on Mon, 02 Nov 2026 06:09:33 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Pabitra N. Sen.