18.1: Electric Potential

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    18.1: Electric Potential

    In Chapter 8 a force was called conservative if the work it does on an object moving between two points does not depend on the path taken. Gravity is conservative, and that is what allowed us to define gravitational potential energy: a single number, \(U\), attached to each position, whose change \(\Delta U = -W\) records the work gravity does. The electric force between charges at rest is also conservative. Coulomb’s law has exactly the form of Newton’s law of gravitation, a force directed along the line between two point charges whose size depends only on their separation, and the argument that made gravity conservative applies without change. By superposition, the electric field of any arrangement of static charges is conservative as well.

    Suppose a test charge \(q_0\) moves from point \(A\) to point \(B\) in an electric field \(\vec{E}\). The field exerts a force \(q_0\vec{E}\) on it, and does work

    \[W_{AB} = \int_A^B q_0\vec{E}\cdot d\vec{s},\]

    where \(d\vec{s}\) is a small step along the path. Because the force is conservative, \(W_{AB}\) depends only on the endpoints, and the change in the electric potential energy is \(\Delta U = -W_{AB}\). That change is proportional to \(q_0\). Dividing it out, just as we divided the force by \(q_0\) to define the field, leaves a quantity that depends only on the field and the two points. It is the potential difference between \(B\) and \(A\):

    Key Equation: Potential difference

    \[\Delta V = V_B - V_A = \frac{\Delta U}{q_0} = -\int_A^B \vec{E}\cdot d\vec{s}. \tag{18.1}\]

    The electric potential \(V\) at a point is the electric potential energy per unit charge that a test charge would have there. Like potential energy, it is defined only up to a constant: only differences in potential have physical meaning, and we are free to choose where \(V = 0\). For a charge distribution of limited size the natural choice is \(V = 0\) infinitely far away. In circuits, the conventional zero is the Earth, or ground. The potential difference between two points is also called the voltage between them.

    The SI unit of potential is the volt (V), named for Alessandro Volta, who built the first battery in 1800:

    \[1\,\mathrm{V} = 1\,\mathrm{J/C}.\]

    A potential difference of one volt means that one joule of work is needed to move one coulomb of charge between the two points. The volt also gives a second name to the unit of electric field, as Chapter 16 promised: \(1\,\mathrm{N/C} = 1\,\mathrm{N\cdot m/(C\cdot m)} = 1\,\mathrm{J/(C\cdot m)} = 1\,\mathrm{V/m}\). From now on we will usually quote fields in volts per meter.

    Parallel plates at 300 volts and 0 volts with a uniform field between them.
    Figure 18.1. The potential in a uniform field. The field points from the positive plate toward the negative one, and the potential falls steadily in that direction. The dashed lines join points of equal potential and are perpendicular to \(\vec{E}\). Moving from \(A\) to \(B\), a distance \(d\) along the field, the potential falls by \(Ed\).
    Figure descriptionTwo large parallel plates, a positive plate on the left at 300 volts and a negative plate on the right at 0 volts, with a uniform electric field pointing from left to right between them. Dashed vertical lines between the plates mark positions of equal potential, labeled 250, 200, 150, 100 and 50 volts, decreasing from left to right. A point A near the left plate and a point B farther right are joined by a displacement along the field of length d.

    A uniform field. The simplest case is a uniform field \(\vec{E}\), such as the field between two large, oppositely charged parallel plates (Section 16.3). Move a test charge a displacement \(\Delta\vec{s}\). Since \(\vec{E}\) is constant it comes out of the integral, and

    Key Equation: Potential difference in a uniform field

    \[\Delta V = -\vec{E}\cdot\Delta\vec{s} = -Ed, \tag{18.2}\]

    where \(d\) is the component of the displacement along the field. The minus sign carries the key physical idea: the electric field points in the direction of decreasing potential. Moving with the field, the potential drops; moving against it, the potential rises; moving perpendicular to it, the potential does not change at all (Figure 18.1).

    Example 18.1: The potential difference between two plates

    Two large parallel plates \(1.50\,\mathrm{cm}\) apart have a uniform field of \(2.00\times 10^{4}\,\mathrm{V/m}\) between them. (a) What is the potential difference between the plates, and which plate is at the higher potential? (b) How much work does the field do on a charge of \(+3.0\,\mathrm{nC}\) carried from the positive plate to the negative plate?

    Solution

    (a) The field points from the positive plate to the negative plate, so moving in that direction is moving along the field, and by equation (18.2)

    \[\Delta V = V_- - V_+ = -Ed = -(2.00\times10^{4}\,\mathrm{V/m})(0.0150\,\mathrm{m}) = -300\,\mathrm{V}.\]

    The potential difference between the plates is \(\boxed{300\,\mathrm{V}}\), with the positive plate higher. (This is the same pair of plates that accelerated an electron in Example 16.10.)

    (b) The change in potential energy is \(\Delta U = q\,\Delta V = (3.0\times10^{-9})(-300) = -9.0\times 10^{-7}\,\mathrm{J}\), and the work done by the field is \(W = -\Delta U = \boxed{+9.0\times 10^{-7}\,\mathrm{J}}\). The field pushes the positive charge “downhill” in potential and does positive work on it, exactly as gravity does positive work on a falling rock.

    Example 18.2: The path does not matter

    A uniform field of \(500\,\mathrm{V/m}\) points in the \(+x\) direction. Find \(V_B - V_A\) between \(A\) at the origin and \(B\) at \((0.40\,\mathrm{m},\,0.30\,\mathrm{m})\), (a) along the straight line from \(A\) to \(B\), and (b) along the path that runs first along \(x\) to \(C = (0.40\,\mathrm{m},\,0)\) and then along \(y\) to \(B\).

    Solution

    (a) The displacement is \(\Delta\vec{s} = (0.40\,\hat{\imath} + 0.30\,\hat{\jmath})\,\mathrm{m}\), and \(\vec{E} = 500\,\hat{\imath}\,\mathrm{V/m}\), so

    \[V_B - V_A = -\vec{E}\cdot\Delta\vec{s} = -(500)(0.40) = \boxed{-200\,\mathrm{V}}.\]

    (b) From \(A\) to \(C\) the step lies along the field, so \(V_C - V_A = -(500)(0.40) = -200\,\mathrm{V}\). From \(C\) to \(B\) the step is perpendicular to the field, and \(V_B - V_C = 0\). The total is again \(\boxed{-200\,\mathrm{V}}\). Any path gives the same answer, because only the displacement along the field matters. That is what it means for the potential to be well defined.

    Note: Potential versus potential energy

    The two terms are easy to confuse. Potential energy \(U\), in joules, belongs to a charge in a field; it depends on the charge. Potential \(V\), in volts, belongs to a point in space; it is set by the source charges alone, whether or not a test charge is there. The relationship is exactly that between force and field: \(\vec{F} = q\vec{E}\), and \(U = qV\).

    Checkpoint 18.1

    In a certain region the electric field points due north. (a) If you walk due north, does the potential increase, decrease, or stay the same? (b) What if you walk due east? (c) A point \(P\) is at a potential of \(50\,\mathrm{V}\) and a point \(Q\) is at \(-20\,\mathrm{V}\). Is the field, on average, pointing from \(P\) toward \(Q\) or the other way?

    Answer

    Electric Potential Energy

    Once the potential is known at every point, the electric potential energy of any charge \(q\) placed at a point follows at once, by turning the definition around:

    Key Equation: Electric potential energy of a charge

    \[U = qV, \qquad \Delta U = q\,\Delta V. \tag{18.3}\]

    If the electric force is the only force doing work, mechanical energy is conserved, as in Chapter 8:

    \[K_i + qV_i = K_f + qV_f, \qquad\text{or}\qquad \Delta K = -q\,\Delta V. \tag{18.4}\]

    A charge that gains kinetic energy must lose potential energy. For a positive charge that means moving to a lower potential: positive charges “fall downhill” in potential, along the field. A negative charge loses potential energy by moving to a higher potential, so electrons “fall uphill,” against the field. Keeping the sign of \(q\) in equation (18.4) takes care of this automatically.

    The electron volt. Atomic and subatomic particles have such small energies that the joule is an awkward unit for them. A more convenient one is the energy a particle of charge \(e\) gains in falling through a potential difference of one volt. This is the electron volt:

    \[1\,\mathrm{eV} = (1.602\times10^{-19}\,\mathrm{C})(1\,\mathrm{V}) = 1.602\times10^{-19}\,\mathrm{J}. \tag{18.5}\]

    An electron or proton accelerated from rest through a potential difference of \(300\,\mathrm{V}\) therefore gains exactly \(300\,\mathrm{eV}\) of kinetic energy, without any arithmetic. Chemical reactions involve energies of a few eV per molecule, X-ray photons thousands (keV), and nuclear reactions millions (MeV). You will meet all of these in Part III.

    Example 18.3: Accelerating an electron, by energy

    An electron is released from rest at the negative plate of Example 18.1 and accelerates to the positive plate. Find its kinetic energy in electron volts and joules, and its final speed.

    Solution

    The electron moves from the negative plate to the positive plate, up \(300\,\mathrm{V}\) in potential, so \(\Delta V = +300\,\mathrm{V}\). By equation (18.4), with \(q = -e\),

    \[\Delta K = -q\,\Delta V = -(-e)(300\,\mathrm{V}) = \boxed{300\,\mathrm{eV}} = (300)(1.602\times10^{-19}\,\mathrm{J}) = 4.81\times 10^{-17}\,\mathrm{J}.\]

    Starting from rest, \(K = \tfrac12 m_e v^2\), so

    \[v = \sqrt{\frac{2K}{m_e}} = \sqrt{\frac{2(4.81\times10^{-17})}{9.11\times10^{-31}}} = \boxed{1.03\times 10^{7}\,\mathrm{m/s}}.\]

    This is exactly the answer Example 16.10 found by computing the acceleration, then using a kinematic equation. The energy method needs neither the acceleration nor the distance between the plates, only the potential difference. It works just as well when the field is not uniform, where the kinematic method would fail.

    Example 18.4: Stopping a proton

    A proton moving at \(3.0\times 10^{5}\,\mathrm{m/s}\) heads directly into a region where the potential rises. Through what potential difference must it pass to be brought to rest?

    Solution

    The proton’s kinetic energy is \(K = \tfrac12(1.673\times10^{-27})(3.0\times10^{5})^2 = 7.5\times 10^{-17}\,\mathrm{J}\), or \(K/e = 470\,\mathrm{eV}\). It stops when all of this has become potential energy, \(e\,\Delta V = K\), so

    \[\Delta V = \frac{K}{e} = \boxed{470\,\mathrm{V}}.\]

    Once \(K\) is in electron volts, the stopping potential for a singly charged particle is the same number in volts.

    Checkpoint 18.2

    A proton and an electron are each released from rest midway between two charged plates. (a) Which way does each move, toward higher or lower potential? (b) When each reaches a plate, which has gained more kinetic energy? (c) Which is moving faster?

    Answer

    Answers to Checkpoints

    Checkpoint 18.1. (a) It decreases: the field points in the direction of decreasing potential. (b) It stays the same. Walking perpendicular to the field, \(\vec{E}\cdot d\vec{s} = 0\), so you are moving along an equipotential. (c) From \(P\) toward \(Q\): the field points from high potential (\(50\,\mathrm{V}\)) toward low potential (\(-20\,\mathrm{V}\)).

    Checkpoint 18.2. (a) Each moves in the direction that lowers its potential energy \(U = qV\). The proton, positive, moves toward lower potential (along the field). The electron, negative, moves toward higher potential (against the field). (b) They gain the same kinetic energy. Each starts midway and ends at a plate, so each falls through a potential difference of the same size, half the plate voltage, and \(|q| = e\) for both. The kinetic energy gained, \(e\,|\Delta V|\), is the same. (c) The electron: with equal kinetic energies, \(v \propto 1/\sqrt{m}\), so the electron moves about \(\sqrt{1840} \approx 43\) times faster.


    This page titled 18.1: Electric Potential was last modified on Thu, 12 Nov 2026 04:27:02 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.