Opening the book…
Uniform circular motion is motion along a circular path at constant speed. In physics, “uniform” means “constant in magnitude”, so the speed is constant, but the velocity is not, because the direction of motion is continuously changing. A particle moving in a circle is therefore always accelerating, even at constant speed.
Centripetal acceleration
If the speed is constant, the only thing the velocity can change is its direction, and the direction is always tangent to the circle. Over a short time interval the velocity direction turns slightly, so the change \(\Delta\vec{v}\) points into the circle. In the limit \(\Delta t \to 0\) that change becomes exactly perpendicular to the velocity, and the acceleration points straight at the center; see Figure 4.3. (Over a finite interval \(\Delta\vec{v}\) only points roughly inward: it is the limit that makes it exact.) The acceleration of a particle in uniform circular motion is called the centripetal acceleration, from the Latin for “center seeking.”
We can get the size of that acceleration directly. Put the center of the circle at the origin, let the particle start at \((r,0)\), and let it travel counterclockwise. Write \(T\) for the time it takes to go once around, the period, which we look at more closely in §4.3. Because the speed is constant, the particle sweeps out equal angles in equal times, so after a time \(t\) it has swept through the fraction \(t/T\) of a full turn, an angle of \(2\pi t/T\). Its position is therefore
\[\vec{r}(t) = r\cos\!\left(\frac{2\pi t}{T}\right)\hat\imath + r\sin\!\left(\frac{2\pi t}{T}\right)\hat\jmath.\]
Differentiating once with the chain rule gives the velocity, and differentiating again gives the acceleration:
\[\begin{aligned}\vec{v}(t) &= \frac{2\pi r}{T}\left[-\sin\!\left(\frac{2\pi t}{T}\right)\hat\imath + \cos\!\left(\frac{2\pi t}{T}\right)\hat\jmath\right], \\ [4pt] \vec{a}(t) &= -\left(\frac{2\pi}{T}\right)^{\!2}\left[r\cos\!\left(\frac{2\pi t}{T}\right)\hat\imath + r\sin\!\left(\frac{2\pi t}{T}\right)\hat\jmath\right] = -\left(\frac{2\pi}{T}\right)^{\!2}\vec{r}(t).\end{aligned}\]
Three things fall out at once. The speed is \(|\vec{v}| = 2\pi r/T\), the circumference divided by the period, which is what it had better be. The acceleration is a negative multiple of the position vector, so it points from the particle straight back at the center, confirming what Figure 4.3 shows. And its magnitude is
\[a_c = \left(\frac{2\pi}{T}\right)^{\!2} r = \frac{\left(2\pi r/T\right)^2}{r} = \frac{v^2}{r},\]
which is the result we were after:
Key Equation: Centripetal acceleration
\[a_c = \frac{v^2}{r}, \tag{4.13}\]
where \(v\) is the (constant) speed and \(r\) is the radius of the circular path. The acceleration always points from the particle’s current position toward the center of the circle.
Note that the speed enters squared. Doubling the speed around the same curve does not double the acceleration: it quadruples it. This is why a curve that feels comfortable at \(30\,\mathrm{km/hr}\) can be genuinely dangerous at \(60\,\mathrm{km/hr}\), and it is worth committing to memory before Chapter 5, where we ask what force is required to produce this acceleration.
Note: “Centripetal” names a direction, not a force
Centripetal means “directed toward the center.” It tells you where the acceleration points; it says nothing about what causes it. When we take up forces in Chapter 5, the answer to “what pushes the object toward the center?” will be different every time: tension in a string, friction between tire and road, gravity on a satellite, the normal force from a banked track.
There is no separate “centripetal force” in nature waiting to be added to your list of forces. The phrase is shorthand for whichever ordinary force happens to be pointing at the center in the problem at hand.
Checkpoint 4.3
Two cars round two different circular curves, each at constant speed. Car \(A\) takes a curve of radius \(r\) at speed \(v\). Car \(B\) takes a curve of radius \(2r\) at speed \(2v\). Which car has the larger centripetal acceleration, and by what factor?
Period and frequency
A useful auxiliary quantity is the period of revolution, \(T\): the time it takes the particle to complete one full circle. Since one circle has circumference \(2\pi r\) and the particle moves at constant speed \(v\),
Key Equation: Period of uniform circular motion
\[T = \frac{2\pi r}{v}. \tag{4.14}\]
The frequency \(f\) counts revolutions per unit time, and is measured in hertz (\(1\,\mathrm{Hz} = 1\,\mathrm{s^{-1}}\)) or, often in mechanics, in revolutions per minute (rpm).
Key Equation: Frequency
\[f = \frac{1}{T} \tag{4.15}\]
Example 4.5: Artificial gravity on a spacecraft
A long-duration mission to Mars would require some form of artificial gravity to keep the astronauts healthy. One method is to spin a section of the spacecraft so that the centripetal acceleration felt by the crew matches the gravitational acceleration on Earth. For a circular section of radius \(12\,\mathrm{m}\), how many revolutions per minute are required to simulate Earth gravity?
Solution
Step 1: Find the required speed. We want \(a_c = g = 9.8\,\mathrm{m/s^2}\). Set equation (4.13) equal to \(g\) and solve for \(v\): multiply both sides by \(r\), then take the square root of both sides:
\[\frac{v^2}{r} = g \quad\Longrightarrow\quad v^2 = g r \quad\Longrightarrow\quad v = \sqrt{g r},\]
so
\[v = \sqrt{(9.8\,\mathrm{m/s^2})(12\,\mathrm{m})} = \sqrt{117.6\,\mathrm{m^2/s^2}} \approx 10.84\,\mathrm{m/s}.\]
Step 2: Find the period. One revolution covers the circumference \(2\pi r\) at speed \(v\), so by equation (4.14)
\[T = \frac{2\pi r}{v} = \frac{2\pi (12\,\mathrm{m})}{10.84\,\mathrm{m/s}} = \frac{75.4\,\mathrm{m}}{10.84\,\mathrm{m/s}} \approx 6.95\,\mathrm{s}.\]
Step 3: Convert to revolutions per minute. By equation (4.15), \(f = 1/T\) is revolutions per second:
\[f = \frac{1\,\mathrm{rev}}{6.95\,\mathrm{s}} = 0.144\,\mathrm{rev/s}.\]
There are \(60\) seconds in a minute, so multiply by \(60\,\mathrm{s}/1\,\mathrm{min}\) to cancel the seconds:
\[f = 0.144\,\frac{\mathrm{rev}}{\cancel{\mathrm{s}}} \times \frac{60\,\cancel{\mathrm{s}}}{1\,\mathrm{min}} \approx 8.6\,\mathrm{rpm}.\]
A shortcut worth seeing. Substituting \(v = \sqrt{gr}\) into \(T = 2\pi r/v\) gives \(T = 2\pi r/\sqrt{gr} = 2\pi\sqrt{r/g}\), since \(r/\sqrt{r} = \sqrt{r}\). Then \(T = 2\pi\sqrt{12/9.8} = 6.95\,\mathrm{s}\) in one step. The formula also shows at a glance that a larger radius means a longer period: a slower spin.
A rotation rate of about \(8.6\,\mathrm{rpm}\) is needed. That is uncomfortably fast: early studies of rotating habitats recommended staying near \(2\,\mathrm{rpm}\) so that crew members would not get dizzy every time they turned their heads, although more recent work suggests people can adapt to somewhat higher rates. Either way, a larger radius gives the same \(a_c\) at a slower spin, which is why proposed rotating habitats tend to be far bigger than \(12\,\mathrm{m}\) in radius.
Example 4.6: A pilot’s banked turn
A pilot enters a horizontal circular turn with initial velocity \(\vec{v}_i = (400\,\hat\imath + 500\,\hat\jmath)\,\mathrm{m/s}\), and after \(24.0\,\mathrm{s}\) leaves the turn with velocity \(\vec{v}_f = (-400\,\hat\imath - 500\,\hat\jmath)\,\mathrm{m/s}\). What is the magnitude of the centripetal acceleration during the turn, in units of \(g\)?
Solution
Step 1: Read the geometry from the velocities. The speed is the magnitude of the velocity, found from its components:
\[|\vec{v}_i| = \sqrt{400^2 + 500^2}\,\mathrm{m/s} = \sqrt{160\,000 + 250\,000}\,\mathrm{m/s} = \sqrt{410\,000}\,\mathrm{m/s} \approx 640\,\mathrm{m/s},\]
and \(|\vec{v}_f|\) is the same, since squaring removes the minus signs. So the speed is constant, as it must be in uniform circular motion. Moreover \(\vec{v}_f = -\vec{v}_i\): the plane ends up flying in exactly the opposite direction. The velocity is always tangent to the circle, so reversing it means the plane has gone halfway around: a \(180^\circ\) turn.
Step 2: Find the radius. If half a revolution takes \(24.0\,\mathrm{s}\), then the full period is \(T = 2(24.0\,\mathrm{s}) = 48.0\,\mathrm{s}\). Solve equation (4.14), \(T = 2\pi r/v\), for \(r\) by multiplying both sides by \(v\) and dividing both sides by \(2\pi\):
\[r = \frac{vT}{2\pi} = \frac{(640\,\mathrm{m/s})(48.0\,\mathrm{s})}{2\pi} \approx 4890\,\mathrm{m}.\]
Step 3: Find the acceleration. \[a_c = \frac{v^2}{r} = \frac{(640\,\mathrm{m/s})^2}{4890\,\mathrm{m}} \approx 83.8\,\mathrm{m/s^2}.\]
The radius was only a stepping stone. Substituting \(r = vT/(2\pi)\) into \(a_c = v^2/r\) cancels one factor of \(v\), leaving \(a_c = 2\pi v/T = 2\pi(640)/48.0 = 83.8\,\mathrm{m/s^2}\) with no intermediate rounding: a useful check.
Step 4: Express it in \(g\)’s. Divide by \(g\); the units cancel and leave a pure number:
\[\frac{a_c}{g} = \frac{83.8\,\cancel{\mathrm{m/s^2}}}{9.8\,\cancel{\mathrm{m/s^2}}} = 8.55 \approx 8.6.\]
The pilot experiences about \(8.6\,g\). This is an extreme maneuver. Trained pilots in g-suits tolerate roughly \(9\,g\), but only for a few seconds at a time; holding \(8.6\,g\) for a full \(24\,\mathrm{s}\) is well beyond human endurance, and an unprotected passenger would lose consciousness almost at once. The numbers here describe the geometry of the turn, not a flight anyone would walk away from.
Answers to Checkpoints
Checkpoint 4.3. Car \(B\). Its centripetal acceleration is \(a_B = (2v)^2/(2r) = 4v^2/(2r) = 2\,v^2/r\), while car \(A\)’s is \(a_A = v^2/r\). So car \(B\)’s acceleration is larger by a factor of \(2\): doubling the speed quadruples \(v^2\), and doubling the radius only halves the result.
This page titled 4.3: Uniform Circular Motion was last modified on Thu, 12 Nov 2026 04:27:20 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.