Opening the book…
All motion is relative. When we say a car is moving at \(30\,\mathrm{m/s}\), we always mean relative to something else: in this case, the ground. The choice of what to measure motion against is called the choice of reference frame. Different reference frames assign different velocities and (in general) different accelerations to the same particle.
The velocity-addition formula
Suppose an object \(P\) (a particle, a vehicle, an animal, anything moving) is observed from two different reference frames: frame \(A\) and frame \(B\). Frame \(B\) is itself moving relative to frame \(A\). Let
- \(\vec{v}_{PA}\) = velocity of \(P\) as measured in frame \(A\)
- \(\vec{v}_{PB}\) = velocity of \(P\) as measured in frame \(B\)
- \(\vec{v}_{BA}\) = velocity of frame \(B\) as measured in frame \(A\)
Then the three are related by simple vector addition:
Key Equation: Relative velocity (Galilean transformation)
\[\vec{v}_{PA} = \vec{v}_{PB} + \vec{v}_{BA}. \tag{4.16}\]
A useful mnemonic: the inner subscripts (“\(B\)”) on the right-hand side cancel, leaving the outer subscripts (“\(PA\)”), exactly what appears on the left-hand side.
Figure 4.4 shows the formula at work in the situation it is most often needed for: crossing a moving river.
This formula generalizes the intuitive statement “your speed relative to the ground equals your speed relative to the train plus the train’s speed relative to the ground.” It applies equally to a swimmer in a current, an airplane in a headwind, or a passenger walking inside a moving subway car.
Example 4.7: Cars on the highway
You are driving at \(80\,\mathrm{mi/hr}\) on a straight freeway. Another car, in the same lane in front of you, is moving at \(70\,\mathrm{mi/hr}\) in the same direction. How fast does the other car appear to move, in your reference frame?
Solution
Let \(P\) be the other car, \(A\) be the ground frame, and \(B\) be your car’s frame. Then \(\vec{v}_{PA} = 70\,\hat\imath\) mi/hr, and \(\vec{v}_{BA} = 80\,\hat\imath\) mi/hr. We want \(\vec{v}_{PB}\), the velocity of the other car relative to you. Equation (4.16) says \(\vec{v}_{PA} = \vec{v}_{PB} + \vec{v}_{BA}\); subtract \(\vec{v}_{BA}\) from both sides to isolate \(\vec{v}_{PB}\):
\[\vec{v}_{PB} = \vec{v}_{PA} - \vec{v}_{BA} = (70 - 80)\,\hat\imath\,\mathrm{mi/hr} = -10\,\hat\imath\,\mathrm{mi/hr}.\]
In your frame the other car drifts backward toward you (the \(-\hat\imath\) direction) at \(10\,\mathrm{mi/hr}\), which is exactly what you see through the windshield as you slowly close the gap and overtake it.
Acceleration in different reference frames
If frame \(B\) moves with constant velocity relative to frame \(A\) (i.e., \(\vec{v}_{BA}\) is constant), then differentiating equation (4.16) gives
\[\vec{a}_{PA} = \vec{a}_{PB}. \tag{4.17}\]
The acceleration of \(P\) is the same in both frames. Two observers in uniform relative motion will always agree on a particle’s acceleration, even though they disagree on its velocity. This fact will be crucial when we introduce Newton’s laws in Chapter 5: any frame moving at constant velocity relative to a frame in which Newton’s laws hold is itself a frame in which Newton’s laws hold.
If \(B\) is itself accelerating relative to \(A\), equation (4.17) acquires an extra term \(\vec{a}_{BA}\), and the two observers disagree on the acceleration as well.
Example 4.8: A camera operator and a cheetah
A camera operator on a pickup truck is traveling westward at \(20\,\mathrm{km/hr}\) while recording a cheetah running westward \(30\,\mathrm{km/hr}\) faster than the truck. The cheetah stops, turns, and then runs at \(45\,\mathrm{km/hr}\) eastward, as measured by a nervous crew member who stands beside the cheetah’s path. The change in the animal’s velocity takes \(2.0\,\mathrm{s}\).
- What is the magnitude and direction of the cheetah’s acceleration as measured by the ground-based crew member?
- What is the magnitude and direction of the cheetah’s acceleration as measured by the camera operator on the moving truck?
Solution
Take \(+x\) as east, so every westward velocity is negative. The truck moves at \(-20\,\hat\imath\,\mathrm{km/hr}\) relative to the ground.
Initial cheetah velocity, ground frame: westward and \(30\,\mathrm{km/hr}\) faster than the truck, so its speed is \(20 + 30 = 50\,\mathrm{km/hr}\) and its velocity is \(\vec{v}_{C,\rm initial} = -50\,\hat\imath\,\mathrm{km/hr}\).
Final cheetah velocity, ground frame: \(+45\,\hat\imath\,\mathrm{km/hr}\) (eastward).
(a) Ground-frame acceleration. The change in velocity is final minus initial, and subtracting a negative velocity adds its size:
\[\vec{a}_{\rm ground} = \frac{\Delta\vec{v}}{\Delta t} = \frac{45 - (-50)}{2.0}\,\hat\imath\,\mathrm{km/(hr\cdot s)} = \frac{95}{2.0}\,\hat\imath\,\mathrm{km/(hr\cdot s)} = 47.5\,\hat\imath\,\mathrm{km/(hr\cdot s)}.\]
The cheetah’s velocity changes by \(95\,\mathrm{km/hr}\), not \(5\,\mathrm{km/hr}\), because it first has to lose \(50\,\mathrm{km/hr}\) of westward speed and then gain \(45\,\mathrm{km/hr}\) of eastward speed.
The unit “km/hr per second” is awkward, so convert. Since \(1\,\mathrm{km} = 1000\,\mathrm{m}\) and \(1\,\mathrm{hr} = 3600\,\mathrm{s}\),
\[1\,\frac{\mathrm{km}}{\mathrm{hr}} = \frac{1000\,\mathrm{m}}{3600\,\mathrm{s}} = \frac{1}{3.6}\,\frac{\mathrm{m}}{\mathrm{s}},\]
so dividing a speed in km/hr by \(3.6\) converts it to m/s. Then
\[\vec{a}_{\rm ground} = \frac{47.5}{3.6}\,\hat\imath\,\mathrm{m/s^2} \approx +13.2\,\hat\imath\,\mathrm{m/s^2}.\]
The cheetah’s acceleration is about \(13.2\,\mathrm{m/s^2}\) eastward.
(b) Because the truck moves at constant velocity, equation (4.17) applies: the camera operator measures the same acceleration as the crew member. So \(\vec{a}_{\rm camera} = +13.2\,\hat\imath\,\mathrm{m/s^2}\) as well: magnitude \(13.2\,\mathrm{m/s^2}\), direction eastward.
Check. Compute it directly in the truck’s frame. Initially the cheetah runs \(30\,\mathrm{km/hr}\) faster than the truck, westward, so \(v_{CT} = -30\,\mathrm{km/hr}\). Finally, by equation (4.16), \(v_{CT} = v_{CG} - v_{TG} = 45 - (-20) = +65\,\mathrm{km/hr}\). The change is \(65 - (-30) = 95\,\mathrm{km/hr}\) in \(2.0\,\mathrm{s}\), exactly the same as in the ground frame. The two observers disagree about the velocities but agree about how fast they change.
Checkpoint 4.4
A passenger walks forward at \(1.5\,\mathrm{m/s}\) down the aisle of a train moving forward at \(20\,\mathrm{m/s}\) relative to the ground. A second train, on a parallel track, moves backward (in the opposite direction) at \(18\,\mathrm{m/s}\) relative to the ground. How fast does the passenger appear to move, as measured by a passenger sitting still on the second train? In what direction?
Answers to Checkpoints
Checkpoint 4.4. Relative to the ground the passenger moves at \(v_{PG} = 20 + 1.5 = 21.5\,\mathrm{m/s}\) forward. Take forward (the first train’s direction) as positive, so the second train moves at \(v_{TG} = -18\,\mathrm{m/s}\). By equation (4.16), \(v_{PT} = v_{PG} - v_{TG} = 21.5 - (-18) = 39.5\,\mathrm{m/s}\). The seated passenger on the second train sees the walking passenger move at \(39.5\,\mathrm{m/s}\) in the first train’s direction of travel: when two things approach head-on, their relative speed is the sum of their speeds.
This page titled 4.4: Relative Motion was last modified on Thu, 12 Nov 2026 04:27:20 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.