Opening the book…
Summary
- Physics studies matter, energy, space, and time. A physics problem differs from a math problem by requiring you to model a real situation before applying formulas.
- Every measurement is a comparison with a standard. The SI base units used in mechanics are the meter (m), the kilogram (kg), and the second (s); other units, like the newton (\(\,\mathrm{kg \cdot m / s^2}\)), are derived from these.
- Scientific notation, \(N = a \times 10^{n}\) with \(1 \le |a| < 10\), lets us write very large and very small numbers compactly. SI prefixes (kilo-, milli-, micro-, etc.) provide an equivalent shorthand attached directly to the unit.
- Significant figures represent the precision of a measured or computed value. Multiplication/division: match the least precise input’s sig figs. Addition/subtraction: match the least precise input’s decimal places. Exact numbers and defined conversion factors impose no limit. Round only the final answer; carry full precision through intermediate steps.
- Precision (how finely resolved and how repeatable) is not accuracy (how close to the truth). Significant figures report the first and are silent about the second.
- Unit conversions are performed by multiplying by ratios equal to \(1\), oriented so that the unwanted units cancel. For powers (areas, volumes), raise the entire conversion factor to the appropriate power.
- Dimensional analysis requires every term in an equation to share the same combination of base dimensions \(\mathrm{[L]}\), \(\mathrm{[M]}\), \(\mathrm{[T]}\). It is a powerful, cheap check that can rule a result out, but a dimensionally consistent equation may still be wrong.
- An order-of-magnitude estimate answers a question to within about a factor of ten from rough inputs. It tells you the size of an answer before you commit to computing it exactly.
Key Equations
Definition of the newton
\[1\,\mathrm{N} = 1\,\frac{\mathrm{kg}\cdot\mathrm{m}}{\mathrm{s}^2}\]
Scientific notation
\[N = a \times 10^{n}, \qquad 1 \le |a| < 10,\ \ n \in \mathbb{Z}\]
Significant figures
- Multiplication/division: match the least precise input’s number of significant figures.
- Addition/subtraction: match the least precise input’s number of decimal places.
- Exact numbers and defined conversion factors never limit significant figures.
Dimensional analysis
- Every term in a valid equation must share the same combination of dimensions \(\mathrm{[L]}\), \(\mathrm{[M]}\), \(\mathrm{[T]}\).
- Passing this check rules nothing in: it can only rule an equation out.
This page titled 1.S: Measurement (Summary) was last modified on Thu, 12 Nov 2026 04:25:34 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.