1.E: Measurement (Problems)

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    1.E: Measurement (Problems)

    Difficulty key: ★ introductory, ★★ standard, ★★★ challenging.

    Section 1.1 — What is Physics?

    1.1 ★ [Conceptual.] For each of the following questions, state whether you think it is best answered by mathematics, physics, or a different field of science, and briefly justify your choice.

    1. How long does it take a dropped ball to fall \(1.5\,\mathrm{m}\)?
    2. What is the largest prime number less than \(1000\)?
    3. Why does ice float on liquid water?
    4. Why do humans dream?

    1.2 ★★ [Conceptual.] Engineering students sometimes describe physics as “just math with units.” Write a one-paragraph response either supporting or rebutting this characterization, with at least one specific example.

    Section 1.2 — Measuring Standards

    1.3 ★ Express each of the following in terms of the SI base units (m, kg, s):

    1. the joule, \(1\,\mathrm{J} = 1\,\mathrm{N\cdot m}\);
    2. the watt, \(1\,\mathrm{W} = 1\,\mathrm{J/s}\);
    3. the pascal, \(1\,\mathrm{Pa} = 1\,\mathrm{N/m^2}\).

    1.4 ★★ Since 1983 the meter has been defined by fixing the speed of light in vacuum at exactly \(299\,792\,458\,\mathrm{m/s}\), with no uncertainty whatsoever.

    1. Using this definition, how many meters does light travel in \(1.0\,\mathrm{ns}\)?
    2. Approximately how long does it take light to travel from the Sun to the Earth, given the Earth–Sun distance of about \(1.50\times 10^{11}\,\mathrm{m}\) (one astronomical unit, \(1\,\mathrm{au}\))?
    3. In one beat of a human heart (\(\sim 0.85\,\mathrm{s}\)), how far does light travel? Compare this distance to the Earth–Sun distance from part (b).

    1.5 ★ [Conceptual.] In 2019, the International Prototype of the Kilogram (a physical platinum–iridium cylinder kept in a vault near Paris) was retired in favor of a definition of the kilogram based on the Planck constant. Give at least two reasons why defining a unit in terms of a fundamental physical constant is preferable to defining it in terms of a physical artifact.

    1.6 ★★ When the meter was first defined in 1791, it was set equal to one ten-millionth of the distance from the North Pole to the equator, measured along a meridian.

    1. Treating the Earth as a perfect sphere, use this definition to find the Earth’s circumference along a meridian, in kilometers.
    2. From your answer to part (a), find the Earth’s radius. Compare it with the accepted mean radius of \(6.371\times 10^{6}\,\mathrm{m}\) by computing the percent difference.
    3. Modern measurements give the pole-to-equator distance as about \(1.0002\times 10^{7}\,\mathrm{m}\). If the 1791 definition had been carried out perfectly, how long would the meter be, in today’s meters? By how many millimeters does this differ from the meter we actually use?
    4. [Conceptual.] When the meter was redefined in 1960 and again in 1983, the new definitions were chosen to match the existing meter rather than to correct it back to one ten-millionth of the true pole-to-equator distance. Why?

    Section 1.3 — Scientific Notation and Significant Figures

    1.7 ★ Rewrite each quantity using the most appropriate SI prefix (so the leading coefficient is between \(1\) and \(1000\)):

    1. \(4.5 \times 10^{-9}\,\mathrm{m}\)
    2. \(3.2 \times 10^{6}\,\mathrm{s}\)
    3. \(7.1 \times 10^{-3}\,\mathrm{A}\)
    4. \(8.4 \times 10^{12}\,\mathrm{Hz}\)

    1.8 ★★ State the number of significant figures in each of the following measurements, and rewrite each in scientific notation:

    1. \(0.0027\,\mathrm{m}\)
    2. \(4.500\,\mathrm{kg}\)
    3. \(1200\,\mathrm{s}\) (ambiguous: comment on what assumption you must make)
    4. \(6.022\times 10^{23}\) (the Avogadro number, quoted here to four sig figs)

    1.9 ★★ Carry out the following calculations and report the result with the correct number of significant figures.

    1. \((2.34\,\mathrm{m}) \times (1.7\,\mathrm{m})\)
    2. \(\dfrac{12.45\,\mathrm{kg}}{3.2\,\mathrm{s}}\)
    3. \((15.6\,\mathrm{m}) + (2.04\,\mathrm{m}) - (0.083\,\mathrm{m})\)
    4. \(\sqrt{ (3.0\,\mathrm{m})^2 + (4.0\,\mathrm{m})^2 }\)

    1.10 ★ [Conceptual.] A student measures a length and reports the result as \(0.5\,\mathrm{m}\). A second student, working independently, reports the same length as \(0.500\,\mathrm{m}\). Are these two reports equivalent? If not, what is the practical difference between them? Which student’s instrument was more precise?

    Section 1.4 — Unit Conversions

    1.11 ★ Carry out the following conversions:

    1. \(75\,\mathrm{mi/hr}\) to \(\,\mathrm{m/s}\).
    2. \(60\,\mathrm{mi/hr}\) to \(\,\mathrm{km/hr}\).
    3. \(1.0\,\mathrm{L}\) to \(\,\mathrm{cm^3}\). (Hint: \(1\,\mathrm{L} = 1000\,\mathrm{cm^3}\).)
    4. \(9.81\,\mathrm{m/s^2}\) to \(\,\mathrm{ft/s^2}\), using \(1\,\mathrm{m} = 3.281\,\mathrm{ft}\).

    1.12 ★ The density of water is approximately \(1000\,\mathrm{kg/m^3}\). Convert this to \(\,\mathrm{g/cm^3}\). Does your answer match a value you may already know?

    Section 1.5 — Dimensional Analysis and Estimation

    1.13 ★ Check each of the following equations for dimensional consistency. State whether each is dimensionally correct, and if not, identify the offending term. (Symbols: \(v\) and \(v_0\) are velocities; \(a\) is acceleration; \(t\) is time; \(x\) is position; \(m\) is mass; \(F\) is force; \(E\) is energy.)

    1. \(v = v_0 + a\,t\)
    2. \(x = v_0\,t + \tfrac{1}{2}a\,t^2\)
    3. \(v^2 = v_0^2 + 2\,a\)
    4. \(m\,v = m\,v_0 + a\,t\)
    5. \(E = \tfrac{1}{2}m\,v^2\)
    6. \(F = m\,a + m\,v\)

    1.14 ★ [Conceptual.] A classmate claims that dimensional analysis can be used to prove that an equation is correct. Explain why this is not quite true: give an example of an equation that is dimensionally consistent but still physically wrong. What can dimensional analysis reliably tell you?

    Challenge Problems

    1.15 ★★ A laser pulse has a duration of \(15\,\mathrm{fs}\) (femtoseconds). Light travels at \(c = 3.00\times 10^{8}\,\mathrm{m/s}\) in vacuum.

    1. How far does light travel during the pulse? Express your answer in micrometers.
    2. How does that distance compare to the diameter of a human hair (\(\sim 75\,\mathrm{\mu m}\))?
    3. If the pulse repetition rate is \(80\,\mathrm{MHz}\), how many pulses are produced each second? Hint: \(1\,\mathrm{Hz}=1\,\mathrm{s^{-1}}\)

    1.16 ★★ [Real-world application: sports.] Usain Bolt’s world-record \(100\,\mathrm{m}\) sprint took \(9.58\,\mathrm{s}\).

    1. What was his average speed in \(\,\mathrm{m/s}\)?
    2. Convert that speed to \(\,\mathrm{mi/hr}\).
    3. Bolt is reported to have hit a peak speed of about \(12.4\,\mathrm{m/s}\) mid-race. Express this peak speed in \(\,\mathrm{km/hr}\).
    4. At Bolt’s peak speed, how long would it take him to traverse a \(400\,\mathrm{m}\) track (assuming he could hold it)? Compare to the actual world record of \(43.03\,\mathrm{s}\).

    1.17 ★★ [Real-world application: engineering.] A residential solar panel produces about \(350\,\mathrm{W}\) of electrical power under full sunlight.

    1. Express this in kilowatts.
    2. Over a \(6.0\,\mathrm{hr}\) day of full sunlight, how many kilowatt-hours of energy does the panel produce? Note: \(1\,\mathrm{kW \cdot hr} = 3.6\times 10^{6}\,\mathrm{J}\).
    3. Express the daily energy production in joules using scientific notation.
    4. A typical American household uses about \(30\,\mathrm{kW \cdot hr}\) of electricity per day. How many of these solar panels (operating \(6.0\,\mathrm{hr/day}\)) would be needed to meet that demand?

    1.18 ★★ [Real-world application: biology.] A typical adult’s heart beats roughly \(70\) times per minute, pumping about \(70\,\mathrm{mL}\) of blood per beat.

    1. About how many heartbeats occur in an \(80\)-year lifetime? Express in scientific notation.
    2. About how many liters of blood does the heart pump in a lifetime?
    3. Compare that volume to the volume of an Olympic swimming pool (\(2500\,\mathrm{m^3}\)). Express the ratio as a number to one significant figure.

    1.19 ★★★ [The dorm-room wallpaper problem.] A student’s dormitory room measures \(3.1\,\mathrm{m} \times 3.8\,\mathrm{m}\), with a \(2.6\,\mathrm{m}\) ceiling. The student wallpapers all four walls (including the door and window) with the \(480\) sheets of their physics textbook, each \(21\,\mathrm{cm} \times 28\,\mathrm{cm}\).

    1. Compute the total wall area in \(\,\mathrm{m^2}\).
    2. Compute the total area of the \(480\) textbook sheets in \(\,\mathrm{m^2}\).
    3. Show that the situation described is impossible by comparing your two answers.
    4. By what factor would the total area of the sheets have to increase for the scenario to work? If instead the student shrank the room, keeping its shape, by what factor would each length have to shrink?

    1.20 ★★★ [Real-world application: engineering.] A water tank in the shape of a vertical cylinder has a radius of \(1.5\,\mathrm{m}\) and is filled to a height of \(4.0\,\mathrm{m}\). The density of water is \(1000\,\mathrm{kg/m^3}\). Note: the volume of a cylinder is \(V = \pi r^2 h\), and \(1\,\mathrm{m^3} = 264.172\,\mathrm{gal}\).

    1. Compute the volume of water in \(\,\mathrm{m^3}\), then convert it to gallons.
    2. What is the mass of the water in kilograms? Express in scientific notation.
    3. If the tank drains at a steady rate of \(3.2\,\mathrm{gal/min}\), how long (in hours) will it take to empty?
    4. Convert the drain rate to \(\,\mathrm{m^3/s}\).

    1.21 ★★★ A sheet of paper has a thickness of about \(0.10\,\mathrm{mm}\). If you could fold a single sheet in half \(n\) times (a feat physically impossible past about \(n=8\) for an ordinary sheet, though in 2002 a high-school student named Britney Gallivan managed \(12\) folds using a single strip of tissue paper nearly \(1.2\,\mathrm{km}\) long), the resulting stack has a thickness \(t_n = t_0 \cdot 2^n\), where \(t_0\) is the original thickness.

    1. After \(20\) folds, how thick is the stack? Express in meters.
    2. After \(42\) folds, the stack would reach the Moon. Verify this, using an Earth–Moon distance of \(3.84\times 10^{8}\,\mathrm{m}\).
    3. After how many additional folds (beyond \(42\)) would the stack reach the Sun, at \(1.50\times 10^{11}\,\mathrm{m}\)?

    1.22 ★★★ A simple pendulum consists of a small bob of mass \(m\) swinging on a string of length \(L\) near Earth’s surface, where the free-fall acceleration is \(g\). We suspect its period \(T\) (the time for one full swing) depends only on \(L\), \(m\), and \(g\), in the form \(T = k\,L^a m^b g^c\), where \(k\) is a dimensionless constant.

    1. By demanding that both sides have the same dimensions, write equations for the exponents \(a\), \(b\), and \(c\), and solve them.
    2. Use your result to express \(T\). Which of the three quantities does the period not depend on?
    3. Dimensional analysis fixes the exponents but leaves \(k\) completely undetermined. Look up or recall the exact period of a simple pendulum: what is the actual value of \(k\)?
    4. Using your formula, by what factor does the period change if the length is quadrupled? What if the same pendulum is taken to the Moon, where \(g\) is about one-sixth of its Earth value?

    1.23 ★★★ [Real-world application: engineering.] In the United States fuel economy is quoted in miles per gallon (mpg); a certain car is rated at \(30\,\mathrm{mi/gal}\). Surprisingly, the fuel consumption (the reciprocal, volume of fuel per distance) has the dimensions of an area. Use \(1\,\mathrm{gal} = 3.785\,\mathrm{L}\) and \(1\,\mathrm{mi} = 1609\,\mathrm{m}\).

    1. Show that the dimensions of (gallons per mile) reduce to a length squared.
    2. Compute the fuel consumption of this car as an area, in \(\,\mathrm{m^2}\).
    3. European fuel consumption is quoted in liters per \(100\,\mathrm{km}\). Convert \(30\,\mathrm{mi/gal}\) to \(\,\mathrm{L/100km}\), and confirm it corresponds to the same area as in (b).
    4. Interpret the area physically: if all the fuel the car burns were squeezed into a thin thread laid along the road, what would the diameter of that thread be?

    1.24 ★★★ [Real-world application: estimation.] A classic way to estimate the size of a molecule (used by Rayleigh and, earlier, Franklin) is to let a tiny drop of oil spread into a film on water. Suppose a drop of olive oil of volume \(6.0\times 10^{-5}\,\mathrm{cm^3}\) spreads into a roughly circular patch \(20\,\mathrm{cm}\) in diameter, and assume the film is exactly one molecule thick.

    1. Convert the drop’s volume to \(\,\mathrm{m^3}\) and find the area of the film in \(\,\mathrm{m^2}\).
    2. Estimate the thickness of the film, and hence the approximate length of one oil molecule. Express your answer in nanometers.
    3. A single atom is about \(0.1\,\mathrm{nm}\) across. Roughly how many atoms long is the oil molecule? Is this reasonable for a long-chain organic molecule?
    4. State two assumptions built into this estimate that limit its accuracy.

    This page titled 1.E: Measurement (Problems) was last modified on Thu, 12 Nov 2026 04:25:34 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.