Opening the book…
When a particle’s velocity changes (whether in magnitude, direction, or both) the particle is said to be accelerating. The average acceleration over a finite time interval is the change in velocity divided by the time it took:
Key Equation: Average acceleration
\[a_{\mathrm{avg}} = \frac{\Delta v}{\Delta t} = \frac{v_B - v_A}{t_B - t_A}, \tag{2.5}\]
and the instantaneous acceleration is again obtained by letting \(\Delta t \to 0\):
Key Equation: Instantaneous acceleration
\[a = \frac{\mathrm{d}v}{\mathrm{d}t} = \frac{\mathrm{d}^{2}x}{\mathrm{d}t^{2}}. \tag{2.6}\]
The second form says the same thing twice over: acceleration is the rate of change of velocity, and velocity is itself the rate of change of position, so acceleration is the rate of change of the rate of change of position. If that sounds like a mouthful, it is, which is exactly why we give it its own name and its own symbol.
What the sign of the acceleration does and does not tell you
Here is the single most common error in this chapter. It is tempting to read “negative acceleration” as “slowing down.” It does not mean that. The sign of \(a\) tells you which way the change in velocity points, not whether the object is gaining or losing speed. To decide that, you must compare the sign of \(a\) with the sign of \(v\):
Key Equation: Speeding up or slowing down
\[\textbf{Same signs} \;({v\text{ and }a\text{ both}}\; + \;\text{or both}\; -) \;\Longrightarrow\; \textbf{speeding up.}\]
\[\textbf{Opposite signs} \;\Longrightarrow\; \textbf{slowing down.}\]
All four combinations occur routinely:
| \(v\) | \(a\) | Example | Result |
|---|---|---|---|
| \(+\) | \(+\) | car moving right, pressing the accelerator | speeding up |
| \(+\) | \(-\) | car moving right, braking | slowing down |
| \(-\) | \(-\) | car moving left, pressing the accelerator | speeding up |
| \(-\) | \(+\) | car moving left, braking | slowing down |
Note: On the word “deceleration”
Everyday speech uses deceleration to mean “slowing down,” and you will see the word in this book and elsewhere. It is a statement about speed, not about sign: an object decelerating while moving in the \(-x\) direction has a positive acceleration. When a problem gives you a deceleration as a bare positive number, you must supply the sign yourself by asking which way the object is moving. When in doubt, avoid the word and state the acceleration with its sign.
Example 2.1: Reading the signs
A train is moving in the \(-x\) direction at \(20\,\mathrm{m/s}\) when the engineer applies the brakes, producing a constant acceleration of \(a = +2.5\,\mathrm{m/s^2}\) until the train stops.
- Is the train speeding up or slowing down? How do you know?
- How long does it take to stop?
- After it stops, the same acceleration continues to act for another \(2.0\,\mathrm{s}\). Describe the motion.
Solution
(a) The velocity is negative (\(v_0 = -20\,\mathrm{m/s}\), since motion is in the \(-x\) direction) while the acceleration is positive. Opposite signs, so the train is slowing down, even though the acceleration is positive.
(b) Because the acceleration is constant, the average acceleration of equation (2.5) equals \(a\) itself, so \(a = (v - v_0)/\Delta t\). We want \(\Delta t\), which sits in the denominator. Multiply both sides by \(\Delta t\), then divide both sides by \(a\):
\[a = \frac{v - v_0}{\Delta t} \quad\Longrightarrow\quad a\,\Delta t = v - v_0 \quad\Longrightarrow\quad \Delta t = \frac{v - v_0}{a}.\]
The train stops, so \(v = 0\). Substitute, keeping the sign of \(v_0\) inside parentheses:
\[\Delta t = \frac{0 - (-20\,\mathrm{m/s})}{2.5\,\mathrm{m/s^2}} = \frac{+20\,\mathrm{m/s}}{2.5\,\mathrm{m/s^2}} = 8.0\,\mathrm{s}.\]
Subtracting a negative number is the same as adding its magnitude, so the numerator is \(+20\), not \(-20\). Had we dropped the sign, the answer would have been \(-8.0\,\mathrm{s}\): a time before the brakes were applied, which is a clear signal that a sign went astray. The units check too: \((\mathrm{m/s}) \div (\mathrm{m/s^2}) = (\mathrm{m/s}) \times (\mathrm{s^2/m}) = \mathrm{s}\).
(c) Nothing about the acceleration changes at the instant the train stops. Restart the clock there, so the new initial velocity is \(v_0 = 0\). With \(a > 0\) the velocity immediately becomes positive: the train begins moving in the \(+x\) direction and speeds up. After two more seconds,
\[v = v_0 + a\,\Delta t = 0 + (2.5\,\mathrm{m/s^2})(2.0\,\mathrm{s}) = +5.0\,\mathrm{m/s}.\]
Velocity zero does not mean acceleration zero: a point we will meet again at the top of a thrown ball’s flight.
Checkpoint 2.4
A ball rolls up a ramp, slows, stops, and rolls back down. Take “up the ramp” as the \(+x\) direction. What is the sign of the ball’s acceleration on the way up? At the instant it is momentarily at rest? On the way down? Does the sign ever change?
Answers to Checkpoints
Checkpoint 2.4. Negative in all three cases, so it never changes sign. On the way up the ball moves in \(+x\) but is slowing, so its acceleration opposes its velocity and is negative. At the top the velocity is momentarily zero, but the velocity is still changing (from positive to negative), so the acceleration is still negative. On the way down the ball moves in \(-x\) and speeds up, so acceleration and velocity share the same (negative) sign. The velocity changes sign at the top; the acceleration does not.
This page titled 2.3: Acceleration was last modified on Thu, 12 Nov 2026 04:26:47 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.