7.1: Work Done by a Constant Force

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    7.1: Work Done by a Constant Force

    Push a stalled car and it starts to roll; you have changed something about it, and the change is bigger the farther you push. Hit the brakes in a moving car and it slows down; friction takes something away from it, and more is taken the farther the car travels while braking. In both cases a force acts while the object moves, and in both cases the object’s energy changes. The amount of energy a force adds to or removes from an object is the work done by that force:

    • positive work means the force transfers energy to the object;
    • negative work means the force takes energy from the object.

    Throughout this chapter we treat each object as a particle, as we did in Chapters 5 and 6. Several forces may act on it at once, and each does its own work. The total of all of them, the net work, is the net change in the object’s energy:

    Key Equation: Work and energy

    \[W_{\rm net} = W_1 + W_2 + W_3 + \cdots = \Delta E. \tag{7.1}\]

    If \(W_{\rm net} > 0\) the object ends up with more energy than it started with; if \(W_{\rm net} < 0\) it ends up with less; and if \(W_{\rm net} = 0\) the forces’ contributions cancel and its energy is unchanged. Chapter 8 will show exactly which kind of energy changes (for a particle, it turns out to be the energy of its motion) and will give that energy a formula. For now, equation (7.1) is our definition: work is a change in energy.

    Calculating the work

    Only the part of a force along the direction of motion transfers energy. A force perpendicular to the motion, like the normal force on a block sliding across a level table, does no work at all, however large it is. For a constant force \(\vec{F}\) acting while the object undergoes a straight-line displacement \(\vec{d}\), the work is the component of the force parallel to the displacement, \(F_\parallel\), times the magnitude of the displacement:

    Key Equation: Work done by a constant force

    \[W = F_\parallel\, d = Fd\cos\theta = \vec{F}\cdot\vec{d}. \tag{7.2}\]

    Constant force F at angle theta to an object's horizontal displacement d.
    Figure 7.1. A constant force \(\vec{F}\) acts on an object that undergoes a displacement \(\vec{d}\) (the dashed outline shows the final position). Only the component of the force along the displacement, \(F_\parallel = F\cos\theta\), does work; the work is \(W = F_\parallel d\).
    Figure descriptionA constant force F applied at an angle theta to an object's horizontal displacement d, with a dashed outline showing the final position. Only the component of the force along the displacement does work.

    The three forms say the same thing. In the first, \(F_\parallel\) is the component of \(\vec{F}\) along \(\vec{d}\): positive if it points the same way as the displacement, negative if it points the opposite way. In the second, \(\theta\) is the angle between \(\vec{F}\) and \(\vec{d}\) (Figure 7.1), so that \(F_\parallel = F\cos\theta\). The third is the dot product of Chapter 3, which makes it clear that work is a scalar.

    Three panels: force at acute, right and obtuse angles to d, giving positive, zero, negative work.
    Figure 7.2. The sign of the work is carried entirely by \(\cos\theta\). The displacement \(\vec{d}\) is the same in all three cases; only the direction of the force differs. In (b) the force is perpendicular to the motion, like the normal force on a sliding block or gravity on a satellite in a circular orbit, and does no work at all.
    Figure descriptionThree panels showing the same displacement d with the force at a different angle in each: acute, so the work is positive; perpendicular, so the work is zero; and obtuse, so the work is negative. The sign of the work is carried entirely by cosine theta.
    Note: Which angle?

    The \(\theta\) in \(Fd\cos\theta\) is the angle between the force and the displacement, and that is often not the angle given in the problem. For a block sliding \(2.0\,\mathrm{m}\) down a \(30^\circ\) incline, the angle given is the incline’s, but the angle between the weight (straight down) and the displacement (down the slope) is \(60^\circ\). The safer habit is to find \(F_\parallel\) from the picture: the weight’s component along the slope is \(mg\sin 30^\circ\), pointing the way the block moves, so \(W_g = (mg\sin 30^\circ)(2.0\,\mathrm{m})\). Both routes agree, because \(\cos 60^\circ = \sin 30^\circ\), but only one of them depends on picking the right angle.

    The SI unit of work is the joule: \(1\,\mathrm{J} = 1\,\mathrm{N\cdot m} = 1\,\mathrm{kg\cdot m^2/s^2}\). A joule is about the work you do lifting an apple from the table to your mouth. The cosine carries the sign: a force with a component along the motion (\(\theta < 90^\circ\)) does positive work, a force with a component against the motion (\(\theta > 90^\circ\)) does negative work, and a force perpendicular to the motion (\(\theta = 90^\circ\)) does none (Figure 7.2).

    When the force and displacement are given in components, the dot product is often the quicker route: \(W = F_x d_x + F_y d_y + F_z d_z\). No angle is needed, and the sign comes out automatically.

    Checkpoint 7.1

    You lower a bucket into a well at constant speed. What is the sign of the work done on the bucket by the rope, and by gravity? What is the net work? Does the bucket’s energy change?

    Answer

    Work and the free-body diagram

    To find the work done by a specific force, you must know that force. These forces are given to you by Newton’s laws, just like in Chapters 5 and 6. So a work problem is a Chapter 6 problem with one more step at the end: multiplying by a displacement.

    Note: Strategy: finding the work done by each force
    1. Draw the free-body diagram and mark the direction of the displacement \(\vec{d}\) beside it.
    2. Find the unknown forces with Newton’s laws. Use the perpendicular equation for the normal force (and from it, friction \(F_{f,k} = \mu_k F_N\)); use the equation along the motion for a tension or an applied force. If the velocity is constant, \(\vec{F}_{\rm net} = 0\).
    3. Find the angle between each force and \(\vec{d}\), and apply \(W = Fd\cos\theta\). Forces perpendicular to \(\vec{d}\) do no work; a force exactly opposite \(\vec{d}\) does \(-Fd\).
    4. Add the works to get \(W_{\rm net}\), which is the change in the object’s energy. As a check, \(W_{\rm net}\) also equals the work done by the net force, \(\vec{F}_{\rm net}\cdot\vec{d}\).
    Example 7.1: Work done by each force on a pushed block

    A block of mass \(2.50\,\mathrm{kg}\) is pushed a distance \(2.20\,\mathrm{m}\) across a horizontal table by a constant force of \(16.0\,\mathrm{N}\) directed \(25^\circ\) below the horizontal. Friction between block and table is \(4.0\,\mathrm{N}\). Find the work done on the block by (a) the applied force, (b) friction, (c) the normal force, (d) gravity, and (e) the net force. (f) Does the block’s energy increase or decrease, and by how much?

    Solution

    The displacement is horizontal, of magnitude \(d = 2.20\,\mathrm{m}\). For each force, the whole job is to find the angle \(\theta\) between that force and the displacement, and then apply \(W = Fd\cos\theta\). The cosine supplies the sign automatically.

    (a) The applied force points \(25^\circ\) below the horizontal, and the displacement is horizontal, so the angle between them is \(25^\circ\):

    \[W_{\rm app} = Fd\cos 25^\circ = (16.0\,\mathrm{N})(2.20\,\mathrm{m})(0.906) = 31.9\,\mathrm{J}.\]

    Only the horizontal component, \(F\cos 25^\circ = 14.5\,\mathrm{N}\), does work; the downward component, \(F\sin 25^\circ\), is perpendicular to the motion and does none.

    (b) Friction points backward, exactly opposite the displacement, so \(\theta = 180^\circ\) and \(\cos 180^\circ = -1\):

    \[W_{\rm fric} = F_f d \cos 180^\circ = (4.0\,\mathrm{N})(2.20\,\mathrm{m})(-1) = -8.8\,\mathrm{J}.\]

    The negative sign means friction takes energy away from the block.

    (c, d) The normal force points up and gravity points down; both are perpendicular to the horizontal displacement, so \(\theta = 90^\circ\) and \(\cos 90^\circ = 0\). Each does zero work, however large it is:

    \[W_N = 0, \qquad W_g = 0.\]

    (e) Work is a scalar, so the net work is the ordinary sum of the four signed numbers:

    \[W_{\rm net} = W_{\rm app} + W_{\rm fric} + W_N + W_g = 31.9 + (-8.8) + 0 + 0 = \boxed{23.1\,\mathrm{J}}.\]

    (f) By equation (7.1), the block’s energy increases by \(23.1\,\mathrm{J}\). The push added \(31.9\,\mathrm{J}\); friction took \(8.8\,\mathrm{J}\) of it back out.

    Check. Alternatively, find the net force first and then its work. The net horizontal force is \(F\cos 25^\circ - F_f = 14.5 - 4.0 = 10.5\,\mathrm{N}\) (vertically the forces balance, since the block stays on the table), and \((10.5\,\mathrm{N})(2.20\,\mathrm{m}) = 23.1\,\mathrm{J}\). ✓ “Sum of the works” and “work of the sum” always agree.

    Notice that the block’s mass never entered the calculation, because friction was given to us directly. Had we been given the coefficient of friction instead, the mass would matter through the normal force. And because the push is directed downward at \(25^\circ\), it presses the block into the table, so \(F_N = mg + F\sin 25^\circ = 24.5 + 6.8 = 31.3\,\mathrm{N}\), larger than the weight alone. The next example has to do exactly that.

    Example 7.2: Pulling a sled at constant velocity

    A child pulls a \(20\,\mathrm{kg}\) sled at constant velocity across level snow with a rope inclined \(35^\circ\) above the horizontal. The coefficient of kinetic friction between sled and snow is \(\mu_k = 0.15\). The sled moves \(12\,\mathrm{m}\). (a) Find the tension in the rope. (b) Find the work done on the sled by each force acting on it. (c) What is the net work, and what happens to the sled’s energy?

    Free-body diagram of a sled pulled across level snow.Figure descriptionFree-body diagram of a sled pulled across level snow. The rope tension F sub T points up and to the right at 35 degrees above the horizontal; the normal force F sub N points up; the weight m g points down; kinetic friction points to the left, opposite the displacement d, which points to the right.
    Solution

    Step 1: Free-body diagram. Four forces act: the tension \(\vec{F}_T\) at \(35^\circ\) above the horizontal, the normal force \(\vec{F}_N\) up, the weight \(m\vec{g}\) down, and kinetic friction \(\vec{F}_{f,k}\) backward. Take \(x\) along the motion and \(y\) up. The velocity is constant, so \(\sum F_x = 0\) and \(\sum F_y = 0\).

    Step 2: The normal force, from the vertical equation. The rope’s upward component helps hold the sled up, so the snow need not push as hard:

    \[F_N + F_T\sin 35^\circ - mg = 0 \quad\Longrightarrow\quad F_N = mg - F_T\sin 35^\circ.\]

    \(F_T\) is still unknown, so we carry \(F_N\) as an expression.

    Step 3: The tension, from the horizontal equation. Forward pull balances friction, and friction is \(\mu_k F_N\):

    \[F_T\cos 35^\circ = \mu_k\left(mg - F_T\sin 35^\circ\right).\]

    Distribute \(\mu_k\), move the \(F_T\) term to the left, and factor out \(F_T\):

    \[F_T\cos 35^\circ + \mu_k F_T\sin 35^\circ = \mu_k mg \;\Longrightarrow\; F_T = \frac{\mu_k mg}{\cos 35^\circ + \mu_k\sin 35^\circ}.\]

    With \(mg = (20)(9.8) = 196\,\mathrm{N}\),

    \[F_T = \frac{(0.15)(196\,\mathrm{N})}{0.819 + (0.15)(0.574)} = \frac{29.4\,\mathrm{N}}{0.905} \approx \boxed{32.5\,\mathrm{N}}.\]

    Then \(F_N = 196 - (32.5)(0.574) = 177.4\,\mathrm{N}\) and \(F_{f,k} = \mu_k F_N = (0.15)(177.4) = 26.6\,\mathrm{N}\).

    Step 4: The work done by each force. The angle between \(\vec{F}_T\) and the horizontal displacement is \(35^\circ\); friction is opposite the displacement; \(\vec{F}_N\) and \(m\vec{g}\) are perpendicular to it:

    \[\begin{aligned}W_T &= F_T d\cos 35^\circ = (32.5\,\mathrm{N})(12\,\mathrm{m})(0.819) = \boxed{319\,\mathrm{J}}, \\ W_f &= F_{f,k} d\cos 180^\circ = -(26.6\,\mathrm{N})(12\,\mathrm{m}) = \boxed{-319\,\mathrm{J}}, \\ W_N &= W_g = \boxed{0}.\end{aligned}\]

    Step 5: Net work. \(W_{\rm net} = 319 - 319 + 0 + 0 = \boxed{0}\), so the sled’s energy does not change. That is no accident: the velocity is constant, so the net force is zero, and the work of a zero net force is zero. Every joule the rope puts into the sled, friction takes back out; it leaves the sled and warms the snow and the runners.

    Check. The horizontal component of the pull, \(F_T\cos 35^\circ = 26.6\,\mathrm{N}\), equals the friction force, as constant velocity requires. ✓

    The strategy also runs in reverse. If you know how much an object’s energy should change, equation (7.1) tells you how much net work is needed, and \(W_{\rm net} = F_{\rm net}\,d\) (for a constant net force along the motion) tells you how far the object must move to get it.

    Example 7.3: How far to drag a crate

    A worker drags a \(40\,\mathrm{kg}\) crate across a level floor by pulling on a rope with a force of \(150\,\mathrm{N}\) directed \(30^\circ\) above the horizontal. The coefficient of kinetic friction is \(\mu_k = 0.30\). Over what distance must the crate be dragged for its energy to increase by \(500\,\mathrm{J}\)? How much work does the rope do over that distance?

    Solution

    Step 1: The normal force and friction. The free-body diagram is the sled’s, with different numbers. Vertically there is no acceleration:

    \[F_N = mg - F_T\sin 30^\circ = (40)(9.8) - (150)(0.500) = 392 - 75 = 317\,\mathrm{N},\]

    so \(F_{f,k} = \mu_k F_N = (0.30)(317) = 95.1\,\mathrm{N}\).

    Step 2: The net force. Horizontally, \(F_{\rm net} = F_T\cos 30^\circ - F_{f,k} = 129.9 - 95.1 = 34.8\,\mathrm{N}\), forward. Unlike the sled, this crate is not in equilibrium: the forward pull exceeds the friction, and the net force does positive work.

    Step 3: Solve for the distance. The net force is constant and along the displacement, so \(W_{\rm net} = F_{\rm net}\,d\). Setting \(W_{\rm net} = \Delta E\) and dividing both sides by \(F_{\rm net}\):

    \[d = \frac{\Delta E}{F_{\rm net}} = \frac{500\,\mathrm{J}}{34.8\,\mathrm{N}} \approx \boxed{14.4\,\mathrm{m}}.\]

    (A joule divided by a newton is a meter.)

    Step 4: Work done by the rope. Over this distance,

    \[W_T = F_T d\cos 30^\circ = (150\,\mathrm{N})(14.4\,\mathrm{m})(0.866) \approx \boxed{1.87\times 10^{3}\,\mathrm{J}}.\]

    Check. Friction does \(W_f = -(95.1)(14.4) = -1.37\times 10^{3}\,\mathrm{J}\), and \(1870 - 1370 = 500\,\mathrm{J}\). ✓ Most of the rope’s work is undone by friction; only about a quarter of it remains as an increase in the crate’s energy.

    Answers to Checkpoints

    Checkpoint 7.1. The rope pulls up while the bucket moves down, so \(\theta = 180^\circ\) and the rope does negative work. Gravity points down, along the motion, so it does positive work. At constant speed the rope’s pull equals the bucket’s weight, so the two works are equal in size and opposite in sign: the net work is zero, and by \(W_{\rm net} = \Delta E\) the bucket’s energy does not change. (Constant velocity always means zero net force, and so zero net work.)


    This page titled 7.1: Work Done by a Constant Force was last modified on Thu, 12 Nov 2026 04:26:45 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.