Opening the book…
Near the Earth’s surface the gravitational force on an object is the constant force \(m\vec{g}\), directed straight down. Because it is constant, equation (7.2) applies, and the result is so simple and so useful that it deserves its own section.
Take \(y\) upward. If the object’s displacement is \(\vec{d} = d_x\,\hat{\imath} + d_y\,\hat{\jmath}\) and the gravitational force is \(m\vec{g} = -mg\,\hat{\jmath}\), the dot product picks out only the vertical part of the displacement:
\[W_g = (m\vec{g})\cdot\vec{d} = (0)(d_x) + (-mg)(d_y) = -mg\,d_y.\]
The vertical component of the displacement is just the change in height, \(d_y = \Delta y = y_f - y_i\). So:
Key Equation: Work done by gravity near Earth’s surface
\[W_g = -mg\,\Delta y = -mg\left(y_f - y_i\right). \tag{7.3}\]
An object that moves down (\(\Delta y < 0\)) has positive work done on it by gravity; one that moves up has negative work done on it. Horizontal motion contributes nothing.
The striking thing about this result is what it leaves out. The horizontal part of the motion does not appear, and neither does the path. Slide a box down a long gentle ramp or drop it straight down through the same height \(h\): gravity does \(+mgh\) either way. Figure 7.3 shows why on an incline. Along the ramp, the component of gravity in the direction of motion is \(mg\sin\theta\), which is smaller than \(mg\), but it acts over the longer distance \(d = h/\sin\theta\), and the product is the same:
\[W_g = (mg\sin\theta)\,d = (mg\sin\theta)\,\frac{h}{\sin\theta} = mgh.\]
Any path, however curved, can be built from many short inclines, so the same is true of every path. Gravity is not the only force with this property, and in Chapter 8 we will see that the forces that share it form a special class: the ones for which a “stored” energy can be defined.
Lifting and lowering
A common special case is lifting. To raise an object a height \(h\) at constant speed, your hand must push up with a force equal to the weight, \(mg\) (the net force is zero), in the same direction as the displacement. Your hand therefore does work
\[W_{\rm hand} = +mgh, \tag{7.4}\]
while gravity, opposing the upward displacement, does \(W_g = -mgh\). The net work is zero, and the object’s energy, by equation (7.1), is unchanged. Lowering the object at constant speed reverses both signs.
This is worth a moment’s thought, because it seems to say that your effort has vanished: you did \(mgh\) of work, and the object has no more energy to show for it. In fact something has changed: the object is now high up, where it can fall and gather speed that it could not have gathered on the floor. Keeping track of that requires thinking about the object and the Earth together, and that is the first job of Chapter 8. For now, the bookkeeping of equation (7.1) for the object alone is exactly right: zero net work, no change in its energy.
Checkpoint 7.2
You pick up a heavy box, carry it across the room at constant speed, and set it down on a second table exactly as high as the first. Over the whole trip, how much work did gravity do on the box? How much net work was done on it? Why, then, are you tired?
Example 7.4: A block sliding down a rough ramp
A \(5.0\,\mathrm{kg}\) block slides \(3.0\,\mathrm{m}\) down a ramp inclined at \(30^\circ\). The coefficient of kinetic friction between the block and the ramp is \(\mu_k = 0.25\). Find the work done on the block by (a) gravity, (b) the normal force, and (c) friction. (d) What is the net work, and how does the block’s energy change?
Solution
Step 1: Forces from Newton’s laws. Tilt the axes as in Chapter 6: \(x\) down the slope (the direction of \(\vec{d}\)), \(y\) perpendicular to it. The block does not accelerate perpendicular to the slope, so
\[F_N = mg\cos 30^\circ = (5.0)(9.8)(0.866) = 42.4\,\mathrm{N},\]
so the friction force is \(F_{f,k} = \mu_k F_N = (0.25)(42.4) = 10.6\,\mathrm{N}\).
Step 2: Work done by gravity. The block drops a height \(h = d\sin 30^\circ = (3.0)(0.500) = 1.5\,\mathrm{m}\), so \(\Delta y = -1.5\,\mathrm{m}\) and, by equation (7.3),
\[W_g = -mg\,\Delta y = -(5.0)(9.8)(-1.5) = \boxed{+73.5\,\mathrm{J}}.\]
(Using the component along the slope instead: \((mg\sin 30^\circ)\,d = (24.5)(3.0) = 73.5\,\mathrm{J}\), the same.)
Step 3: The normal force and friction. The normal force is perpendicular to the slope, and so to the displacement: \(W_N = \boxed{0}\). Friction points up the slope, opposite the displacement:
\[W_f = -F_{f,k} d = -(10.6\,\mathrm{N})(3.0\,\mathrm{m}) = \boxed{-31.8\,\mathrm{J}}.\]
Step 4: Net work. \(W_{\rm net} = 73.5 + 0 - 31.8 = \boxed{41.7\,\mathrm{J}}\). The block’s energy increases by \(41.7\,\mathrm{J}\): gravity puts energy in faster than friction takes it out.
Check. The net force along the slope is \(mg\sin 30^\circ - F_{f,k} = 24.5 - 10.6 = 13.9\,\mathrm{N}\), and \((13.9)(3.0) = 41.7\,\mathrm{J}\). ✓
Example 7.5: Hoisting a beam
A crane lifts a \(500\,\mathrm{kg}\) steel beam a height of \(12\,\mathrm{m}\), with a constant upward acceleration of \(0.50\,\mathrm{m/s^2}\). Find (a) the tension in the cable, (b) the work done by the cable, (c) the work done by gravity, and (d) the change in the beam’s energy.
Solution
(a) Two forces act on the beam: the tension \(F_T\) up and the weight \(mg\) down. Newton’s second law, with up positive, gives \(F_T - mg = ma\), so
\[F_T = m(g + a) = (500\,\mathrm{kg})(9.8 + 0.50)\,\mathrm{m/s^2} = \boxed{5150\,\mathrm{N}}.\]
(b) The tension is along the upward displacement, and (c) the beam rises \(\Delta y = +12\,\mathrm{m}\), so
\[\begin{aligned}W_T &= F_T d = (5150\,\mathrm{N})(12\,\mathrm{m}) = \boxed{6.18\times 10^{4}\,\mathrm{J}}, \\ W_g &= -mg\,\Delta y = -(500)(9.8)(12)\,\mathrm{J} = \boxed{-5.88\times 10^{4}\,\mathrm{J}}.\end{aligned}\]
(d) The beam’s energy changes by the net work:
\[\Delta E = W_{\rm net} = 61\,800 - 58\,800 = \boxed{3.0\times 10^{3}\,\mathrm{J}}.\]
Check. The net force is \(ma = (500)(0.50) = 250\,\mathrm{N}\), and \((250)(12) = 3000\,\mathrm{J}\). ✓ Notice how lopsided the bookkeeping is. Almost all of the cable’s work (\(58.8\,\mathrm{kJ}\) of \(61.8\,\mathrm{kJ}\)) goes into fighting gravity; only \(3.0\,\mathrm{kJ}\) is left over as a change in the beam’s energy. Had the beam been lifted at constant speed, the cable would have done exactly \(58.8\,\mathrm{kJ}\) and the beam’s energy would not have changed at all.
Example 7.6: A skier on a gentle slope
A \(60\,\mathrm{kg}\) skier starts down a \(15^\circ\) slope. The coefficient of kinetic friction between skis and snow is \(0.080\). How far down the slope must she travel for her energy to increase by \(2.0\,\mathrm{kJ}\)?
Solution
Step 1: Net force along the slope. With axes along and perpendicular to the slope, \(F_N = mg\cos 15^\circ\), so friction is \(\mu_k mg\cos 15^\circ\), up the slope. Gravity’s component down the slope is \(mg\sin 15^\circ\). The net force along the slope is therefore
\[F_{\rm net} = mg\sin 15^\circ - \mu_k mg\cos 15^\circ = mg\left(\sin 15^\circ - \mu_k\cos 15^\circ\right).\]
With \(mg = 588\,\mathrm{N}\), this is \((588)(0.2588 - 0.0773) = (588)(0.1815) = 106.7\,\mathrm{N}\).
Step 2: Solve for the distance. \(W_{\rm net} = F_{\rm net}\,d = \Delta E\), so
\[d = \frac{\Delta E}{F_{\rm net}} = \frac{2000\,\mathrm{J}}{106.7\,\mathrm{N}} \approx \boxed{19\,\mathrm{m}}.\]
Check. Over \(18.7\,\mathrm{m}\) of slope she drops \(h = (18.7)\sin 15^\circ = 4.85\,\mathrm{m}\), so gravity does \(mgh = (588)(4.85) = 2.85\,\mathrm{kJ}\), and friction does \(-(45.4\,\mathrm{N})(18.7\,\mathrm{m}) = -0.85\,\mathrm{kJ}\). The sum is \(2.0\,\mathrm{kJ}\). ✓
Answers to Checkpoints
Checkpoint 7.2. Gravity does zero work over the whole trip: \(-mgh\) while you lift the box and \(+mgh\) while you lower it, and nothing on the level carry, since gravity is perpendicular to horizontal motion. Equivalently, \(\Delta y = 0\) overall, so \(W_g = -mg\,\Delta y = 0\). The box starts and ends at rest, and at constant speed in between, so the net work on it is zero too. You are tired because your muscles use chemical energy even when they do no net work on the box: holding a load steady requires muscle fibers to contract and relax continually, and that energy ends up as heat in your body. “Work” in physics is a narrower idea than effort.
This page titled 7.2: Work Done by Gravity was last modified on Thu, 12 Nov 2026 04:26:45 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.