24.4: Generators and Motors

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    24.4: Generators and Motors
    AC generator: a coil rotating between magnet poles in a uniform field B.
    Figure 24.7. An ac generator. (a) A coil rotates in a uniform field, so the angle between its normal and the field is \(\theta = \omega t\). (b) The flux (dashed) varies as \(\cos\omega t\), and the induced emf (solid) as \(\sin\omega t\), with amplitude \(NBA\omega\).
    Figure descriptionPanel a: a generator coil seen end-on, looking along its axis of rotation, between the north pole of a magnet on the left and the south pole on the right, with a uniform field B pointing from left to right. The coil appears as a line segment through the axis, rotating counterclockwise with angular velocity omega; its normal n-hat makes angle theta equal to omega t with B. Panel b: a graph against time of the flux through the coil, a cosine curve, drawn dashed, and the induced emf, a sine curve of amplitude script E max, drawn solid. The emf is largest where the flux crosses zero, and zero where the flux is largest.

    The ac generator. An electric generator converts mechanical energy into electrical energy. In its simplest form, a coil of \(N\) turns and area \(A\) rotates with constant angular velocity \(\omega\) in a uniform magnetic field \(\vec{B}\), about an axis perpendicular to the field (Figure 24.7). If the normal to the coil makes angle \(\theta = \omega t\) with the field, the flux through each turn is

    \[\Phi_B = BA\cos\omega t,\]

    and Faraday’s law gives an emf

    \[\mathcal{E} = -N\frac{d\Phi_B}{dt} = NBA\omega\sin\omega t.\]

    The emf oscillates sinusoidally:

    Key Equation: Emf of an ac generator

    \[\mathcal{E} = \mathcal{E}_{\max}\sin\omega t, \qquad \mathcal{E}_{\max} = NBA\omega. \tag{24.6}\]

    The emf is largest when the plane of the coil is parallel to the field and the flux through it is zero, because that is when the flux is changing fastest; it is zero when the coil faces the field and the flux is largest. The ends of the coil are connected to the external circuit through slip rings, metal rings on the shaft that turn with the coil, and carbon brushes that press against them. The current in the circuit reverses direction every half turn. This is alternating current (ac), the subject of Chapter 26. In North America the generators in power stations turn so that \(f = \omega/2\pi = 60\,\mathrm{Hz}\); in most of the rest of the world, \(50\,\mathrm{Hz}\). To produce direct current instead, the slip rings are replaced by a split-ring commutator, like the one in a dc motor (Section 22.3), which reverses the connections every half turn so that the output never changes sign.

    Example 24.8: A power-station generator in miniature

    A generator coil has 100 turns, each of area \(0.050\,\mathrm{m^2}\), and rotates at \(60\,\mathrm{rev/s}\) in a field of \(0.30\,\mathrm{T}\). Find the maximum emf. At what angle between the coil’s normal and the field is the emf half its maximum?

    Solution

    With \(\omega = 2\pi(60) = 377\,\mathrm{rad/s}\),

    \[\mathcal{E}_{\max} = NBA\omega = (100)(0.30)(0.050)(377) = \boxed{570\,\mathrm{V}}.\]

    The emf is half its maximum when \(\sin\omega t = \frac{1}{2}\), at \(\theta = \boxed{30^\circ}\) (and at \(150^\circ\), \(210^\circ\), and \(330^\circ\)). Commercial generators produce much larger emfs, tens of kilovolts, by using many coils, iron cores, and strong electromagnets. The work to turn them comes from steam turbines driven by burning fuel or nuclear fission, from falling water, or from the wind.

    Work in a generator. When the generator delivers current to a load, the current in the coil feels a torque in the field (Section 22.3), and by Lenz’s law that torque opposes the rotation. The more current is drawn, the harder the generator is to turn. That is why a bicycle dynamo makes pedaling harder only when the lamp is on, and why power stations must burn more fuel when demand rises. Electric and hybrid cars use the same effect in reverse: in regenerative braking, the drive motor is switched to act as a generator, and the opposing torque slows the car while the induced current recharges the battery.

    Motors and back emf. An electric motor (Section 22.3) is a generator run backward: a current in the coil produces a torque that turns it. But as the coil turns in the field, it is also a generator, and an emf is induced in it. By Lenz’s law, this induced emf opposes the current that is driving the motor. It is called the back emf, \(\mathcal{E}_{\text{back}}\), and it is proportional to the motor’s speed. If the motor is connected to a source of voltage \(V\), and its coil has resistance \(R\), the loop rule gives the current:

    \[I = \frac{V - \mathcal{E}_{\text{back}}}{R}. \tag{24.7}\]

    When the motor is first switched on and is not yet turning, there is no back emf, and the current is large, \(V/R\). As the motor speeds up, the back emf grows and the current falls. A motor running freely with no load spins up until the back emf nearly equals \(V\), drawing little current. When a load is applied, the motor slows, the back emf drops, and more current flows, supplying the extra power. The power converted to mechanical work is \(\mathcal{E}_{\text{back}}I\), and \(I^2R\) is lost as heat in the windings.

    Example 24.9: Back emf in a motor

    A \(120\,\mathrm{V}\) dc motor has windings with a resistance of \(2.0\,\mathrm{\Omega}\). Running at full speed, it draws \(4.0\,\mathrm{A}\). Find (a) the back emf at full speed, (b) the mechanical power it delivers, and (c) the current at the instant it is switched on.

    Solution

    (a) From equation (24.7), \(\mathcal{E}_{\text{back}} = V - IR = 120 - (4.0)(2.0) = \boxed{112\,\mathrm{V}}\).

    (b) The power delivered by the source is \(VI = 480\,\mathrm{W}\). Of this, \(I^2R = 32\,\mathrm{W}\) heats the windings, and the rest, \(\mathcal{E}_{\text{back}}I = (112)(4.0) = \boxed{448\,\mathrm{W}}\), is converted to mechanical work.

    (c) At start-up the back emf is zero, so \(I = V/R = 120/2.0 = \boxed{60\,\mathrm{A}}\), fifteen times the running current. This surge is why lights sometimes dim briefly when a large motor, such as a refrigerator compressor or a power saw, starts. If the motor is overloaded and jams, the current stays near this value, and the windings can overheat and burn out.

    Checkpoint 24.3

    (a) The rotation rate of a generator is doubled. What happens to its maximum emf and to the frequency of its output? (b) Why does the current drawn by a blender’s motor increase when a thick mixture slows its blades, and why can a motor that stalls completely overheat?

    Answer

    Answers to Checkpoints

    Checkpoint 24.3. (a) The maximum emf, \(NBA\omega\), is proportional to the angular speed, so it doubles. The frequency, the number of rotations per second, doubles as well. (b) A spinning motor acts as a generator, producing a back emf proportional to its speed that opposes the applied voltage; the current is \(I = (V - \mathcal{E}_{\rm back})/R\). When a thick mixture slows the blades, the back emf drops, the net voltage across the windings rises, and the current increases. A stalled motor has no back emf at all, so it draws the full \(V/R\), typically many times its running current. That current heats the windings rapidly, which is why a motor that stalls can burn out.


    This page titled 24.4: Generators and Motors was last modified on Thu, 12 Nov 2026 04:27:07 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.