C.4: Solving for Three Unknowns

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    C.4: Solving for Three Unknowns

    Circuits with more than one loop (Chapter 21) and some force problems have three unknowns. The rule is the same as before: to solve for three unknowns, you need three independent equations, one for each unknown. If you have only two, keep looking for another relation (another loop, another force equation, a constraint linking the motions) before you start solving. The method is the one you already know, applied one step further:

    1. Use one equation to express one unknown in terms of the other two (or use elimination to remove it).
    2. Substitute into the remaining two equations. You now have two equations for two unknowns.
    3. Solve that pair by substitution or elimination.
    4. Back-substitute the two values into the expression from step 1 to get the third unknown.
    5. Check all three values in all three original equations.

    Choose the unknown to remove wisely: pick the equation with the fewest terms, or an unknown whose coefficient is \(1\).

    Example C.6: Currents in a two-loop circuit

    Applying Kirchhoff’s rules to a two-loop circuit gives the following equations for the three branch currents (in amperes; the numbers come from the batteries and resistors, as in Example 21.3):

    \[\begin{aligned}\text{(1)}\quad & I_1 + I_2 = I_3, \\ \text{(2)}\quad & 2I_1 + 2I_3 = 8, \\ \text{(3)}\quad & 4I_2 + 2I_3 = 14 .\end{aligned}\]

    Find \(I_1\), \(I_2\) and \(I_3\).

    Solution

    Steps 1–2: reduce to two unknowns. Equations (2) and (3) each contain only two currents, so solve each for the current that is not \(I_3\):

    \[\text{from (2):}\quad I_1 = 4 - I_3, \qquad \text{from (3):}\quad I_2 = 3.5 - 0.5\,I_3 .\]

    Substitute both into equation (1), which leaves a single unknown:

    \[(4 - I_3) + (3.5 - 0.5\,I_3) = I_3 \;\Longrightarrow\; 7.5 = 2.5\,I_3 \;\Longrightarrow\; I_3 = 3.0\,\mathrm{A}.\]

    (Here the reduction went straight from three unknowns to one, because two of the equations each had only two unknowns. In general you will pass through a two-by-two system on the way.)

    Step 4: back-substitute. \(I_1 = 4 - 3.0 = 1.0\,\mathrm{A}\) and \(I_2 = 3.5 - 0.5(3.0) = 2.0\,\mathrm{A}\).

    Step 5: check. (1) \(1.0 + 2.0 = 3.0\); (2) \(2(1.0) + 2(3.0) = 8\); (3) \(4(2.0) + 2(3.0) = 14\). ✓

    For larger systems, or for messy numbers, the same steps can be organized as a matrix and handed to a calculator or computer. The physics is in writing down the equations; the solving is bookkeeping. If a current comes out negative, that is not an error either: it means the current flows opposite to the direction you assumed.


    This page titled C.4: Solving for Three Unknowns was last modified on Thu, 12 Nov 2026 04:27:17 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.