Opening the book…
Many problems give two unknowns at once: the tensions in two ropes, or the acceleration of a system and the tension in its string. One equation cannot pin down two unknowns, but two independent equations can. The rule to remember: to solve for two unknowns, you need two equations, and each one must give information the other does not. Two equations to be solved together are called simultaneous equations, and there are two standard ways to solve them. We show both on the pair
\[2x + 3y = 12, \qquad x - y = 1 .\]
Substitution. Solve one equation for one unknown, and substitute the result into the other. The second equation gives \(x = 1 + y\). Substituting into the first,
\[2(1 + y) + 3y = 12 \;\Longrightarrow\; 2 + 5y = 12 \;\Longrightarrow\; y = 2,\]
and then \(x = 1 + y = 3\).
Elimination. Multiply one or both equations by constants so that adding or subtracting them cancels one unknown. Multiply the second equation by \(3\) to get \(3x - 3y = 3\), and add it to the first:
\[(2x + 3y) + (3x - 3y) = 12 + 3 \;\Longrightarrow\; 5x = 15 \;\Longrightarrow\; x = 3,\]
and either equation then gives \(y = 2\). Elimination is the method of choice when an unknown already appears with equal and opposite coefficients, as the tension does in the Atwood machine of Example 5.6.
Either way, finish by substituting the answer into both original equations: \(2(3) + 3(2) = 12\) and \(3 - 2 = 1\). ✓
Figure C.1 shows why two equations are needed and why they must be independent. If the second equation is just a multiple of the first, as \(x + y = 10\) and \(2x + 2y = 20\) are, it carries no new information, and the lines coincide. In physics this means you have written the same law twice and need another piece of physics, such as another direction of Newton’s second law or another loop of a circuit, to close the problem.
Example C.5: A weight held by two ropes
A \(50\,\mathrm{N}\) weight hangs from two ropes. Rope 1 pulls up and to the left at \(30^{\circ}\) above the horizontal; rope 2 pulls up and to the right at \(60^{\circ}\) above the horizontal. Find the tensions \(T_1\) and \(T_2\).
Solution
The weight is at rest, so the forces balance in each direction. Using the components of Section C.6, the horizontal parts of the tensions must cancel, and their vertical parts must hold up the weight:
\[\begin{aligned}x\text{:}\quad & T_2\cos 60^\circ - T_1\cos 30^\circ = 0, \\ y\text{:}\quad & T_1\sin 30^\circ + T_2\sin 60^\circ = 50\,\mathrm{N}.\end{aligned}\]
Two equations, two unknowns. Use substitution: the \(x\)-equation gives
\[T_1 = T_2\,\frac{\cos 60^\circ}{\cos 30^\circ} = 0.577\,T_2 .\]
Substitute into the \(y\)-equation:
\[(0.577\,T_2)(0.500) + T_2\,(0.866) = 50 \;\Longrightarrow\; 1.155\,T_2 = 50 \;\Longrightarrow\; T_2 = 43.3\,\mathrm{N},\]
and \(T_1 = 0.577\,T_2 = 25.0\,\mathrm{N}\).
Check: horizontally, \(43.3\cos 60^\circ = 21.7\) and \(25.0\cos 30^\circ = 21.7\); vertically, \(25.0\sin 30^\circ + 43.3\sin 60^\circ = 12.5 + 37.5 = 50\). ✓ The steeper rope carries more of the load, which makes sense. Chapter 5 solves a three-cable version of this problem in Example 5.5.
Checkpoint C.3
Why can’t you solve the pair \(x + y = 10\) and \(2x + 2y = 20\) for a unique \(x\) and \(y\)? What does the graph of the two equations look like?
Answers to Checkpoints
Checkpoint C.3. The second equation is just twice the first, so it adds no new information: there is really only one equation for two unknowns. Graphically the two lines lie on top of each other, so every point on the line is a solution.
This page titled C.3: Solving for Two Unknowns was last modified on Thu, 12 Nov 2026 04:27:17 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.