D.2: The Integral: Adding Up Small Pieces

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    D.2: The Integral: Adding Up Small Pieces

    Now turn the dashboard question around. Suppose the odometer is broken, but you have a record of the speedometer: the velocity \(v\) at every instant. How far did the car go?

    If the velocity were constant, the answer would be easy: distance equals velocity times time, \(\Delta x = v\,\Delta t\). On a graph of \(v\) versus \(t\), that product is the area of a rectangle of height \(v\) and width \(\Delta t\). The displacement is the area under the velocity graph.

    If the velocity changes, no single rectangle will do. But over a short enough interval, the velocity hardly changes at all. So we chop the trip into many short intervals, each of length \(\Delta t\). Over interval number \(i\) the velocity is nearly some constant \(v_i\), so the car moves about \(v_i\,\Delta t\), the area of one thin strip. Adding up all the strips gives the total:

    \[\Delta x \approx \sum_i v_i\,\Delta t.\]

    A sum like this is called a Riemann sum. It is only approximate, because \(v\) does change a little inside each strip. But the error shrinks as the strips get thinner, and in the limit of infinitely many infinitely thin strips the sum becomes exact (Figure D.2).

    Two side-by-side graphs of the same smooth, rising curve of velocity v versus time t.
    Figure D.2. Integration as a sum of thin strips. Each strip has width \(\Delta t\) and height equal to the velocity at its left edge, so its area is approximately the displacement during that short interval. With four strips (left) the approximation misses noticeably; with sixteen (right) the error is already small. In the limit of infinitely many, infinitely thin strips, the sum equals the area under the curve exactly.
    Figure descriptionTwo side-by-side graphs of the same smooth, rising curve of velocity v versus time t. In the left graph the region under the curve is approximated by four wide rectangles whose tops are set by the curve's height at each rectangle's left edge; large uncovered gaps are visible between the rectangle tops and the curve. In the right graph the same region is approximated by sixteen narrow rectangles, and the gaps between them and the curve are much smaller. The figure shows that thinner strips make the sum of rectangle areas a better approximation to the area under the curve.

    Watching the sum converge

    Here, too, you can watch the limit happen. Let \(v = (10\,\mathrm{m/s^2})\,t\) from \(t = 0\) to \(t = 3.0\,\mathrm{s}\). The graph is a straight line, so the exact area is a triangle: \(\tfrac{1}{2}(3.0\,\mathrm{s})(30\,\mathrm{m/s}) = 45\,\mathrm{m}\). Now pretend we did not know that and add up \(N\) strips, each with its height taken at its left edge:

    Riemann sums for the displacement, with more and more strips
    Number of strips \(N\)Strip width \(\Delta t\) (s)\(\sum v_i\,\Delta t\) (m)
    \(3\)\(1.0\)\(30.0\)
    \(6\)\(0.5\)\(37.5\)
    \(30\)\(0.1\)\(43.5\)
    \(300\)\(0.01\)\(44.85\)

    (With \(N = 3\), for example, the heights are \(v = 0\), \(10\), and \(20\,\mathrm{m/s}\), and \((0 + 10 + 20)(1.0) = 30\).) The sums approach \(45\,\mathrm{m}\). They all fall short because the velocity is increasing, so each strip’s left-edge height is the lowest value in its interval. Every strip misses a small triangle at its top, and those triangles shrink faster than the number of strips grows.

    The integral sign

    The limit of the sum is written with a new symbol:

    Key Equation: The integral as a sum

    \[\int_{t_i}^{t_f} v\,dt \;=\; \lim_{\Delta t \to 0}\, \sum_i v_i\,\Delta t . \tag{D.2}\]

    This is the integral of \(v\) with respect to \(t\) from \(t_i\) to \(t_f\). The sign \(\int\) is a stretched letter S, for sum. Every piece of the notation has a plain meaning:

    • \(dt\) is the width of one small piece. It is not just notation: like \(\Delta t\), it is an actual stretch of time, measured in seconds, only short enough that \(v\) has no chance to change within it. A quantity this small is called infinitesimal.
    • \(v\), the integrand, is “how much per unit of \(t\)” for the piece at time \(t\). The product \(v\,dt\) is the small contribution from one piece.
    • \(t\), the variable of integration, labels the pieces. Each piece has its own value of \(t\), and that is how we tell them apart.
    • The limits of integration \(t_i\) and \(t_f\) mark where the adding starts and where it stops.

    The units of an integral are the units of the integrand times the units of the small piece: \((\,\mathrm{m/s})(\,\mathrm{s}) = \,\mathrm{m}\) here. Whenever an integral appears, you can read it aloud as “add up all the little \(v\,dt\)’s from \(t_i\) to \(t_f\).”

    Area is just one picture

    Graphically, an integral is the area under a curve, provided we count area below the horizontal axis as negative. That is a useful picture: Chapter 2 reads displacement as the signed area under a velocity graph (Figure 2.4), and Chapter 7 reads work as the area under a force–position graph.

    But the deeper idea is the sum, not the area. The area under a graph is seldom the thing a physicist is actually after. We integrate to find the total of something by adding up contributions from a great many tiny parts: the mass of a rod from the masses of its slices, the work done by a varying force from the work done over each small step, the electric field of a charged object from the fields of its tiny bits of charge. Whenever you see \(\int\), think: we are adding up small pieces of something to get the whole. Hold on to that reading and most integrals in physics can be understood before a single one is evaluated.

    Checkpoint D.2

    (a) If \(F\) is a force in newtons and \(t\) a time in seconds, what are the units of \(\int F\,dt\)? What physical quantity has those units? (b) If \(Q\) is a charge in coulombs, what are the units of \(dQ/dt\)?

    Answers to Checkpoints

    Checkpoint D.2. (a) \(\mathrm{N\cdot s} = \mathrm{kg\cdot m/s}\), the units of momentum; \(\int F\,dt\) is the impulse. (b) \(\mathrm{C/s}\), which is the ampere; \(dQ/dt\) is an electric current.


    This page titled D.2: The Integral: Adding Up Small Pieces was last modified on Thu, 12 Nov 2026 04:27:11 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.