D.1: The Derivative: Slope as a Rate of Change

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    D.1: The Derivative: Slope as a Rate of Change

    Average rate: rise over run

    Suppose a cart rolls along a track, and its position \(x\) is recorded at every time \(t\). If it is at \(x_1\) at time \(t_1\) and at \(x_2\) at time \(t_2\), its average velocity over that interval is

    \[v_{\rm avg} = \frac{\Delta x}{\Delta t} = \frac{x_2 - x_1}{t_2 - t_1}.\]

    This is the change in one quantity divided by the change in another: a rate of change. On a graph of \(x\) versus \(t\) it is rise over run, the slope of the straight line joining the two points. A line that cuts a curve at two points like this is called a secant line.

    If the graph is itself a straight line, that is the end of the story: the slope is the same everywhere and so is the velocity. But most graphs curve. For a curved graph the average depends on which interval you choose, and it blurs together everything that happened inside it. A car that averaged \(50\,\mathrm{km/h}\) over an hour may have sat at a red light for some of it and sped on the highway for the rest.

    Shrinking the interval

    To find the velocity at one particular instant, we shrink the interval. Keep the first point fixed and slide the second point toward it. As \(\Delta t\) gets smaller, the secant line pivots, and it settles on a single line that just grazes the curve at the point of interest: the tangent line (Figure D.1). Another way to see it: zoom in on any smooth curve far enough and it looks straight. The slope of that nearly straight piece is the rate of change at that instant.

    A wide graph of position x versus time t showing a curve that bends gently upward.
    Figure D.1. From average rate to instantaneous rate. Each gray secant line joins \(P\) to a later point (\(Q_1\), \(Q_2\), \(Q_3\)) on the position curve; its slope is the average velocity over that interval. As the second point slides toward \(P\), the secants pivot toward the red tangent line, whose slope is the instantaneous velocity at \(P\).
    Figure descriptionA wide graph of position x versus time t showing a curve that bends gently upward. A point P is marked on the curve at an early time t. Three gray secant lines run from P to later points on the curve, labeled Q1, Q2 and Q3, with Q3 closest to P; the closer the second point is to P, the less steep its secant. A red line, the tangent, touches the curve only at P and lies below the curve everywhere else. As the second point moves from Q1 toward P, the secants pivot down toward the tangent, showing that the slope of the tangent is the limit of the average slopes.

    We write the result of this limiting process as

    Key Equation: The derivative

    \[\frac{\mathrm{d}x}{\mathrm{d}t} = \lim_{\Delta t \to 0} \frac{\Delta x}{\Delta t}. \tag{D.1}\]

    This is the derivative of \(x\) with respect to \(t\). Read the symbol \(d\) as “a tiny change in.” Then \(dx/dt\) says just what it looks like: a tiny change in \(x\) divided by the tiny change in \(t\) that produced it. It is a ratio of two very small but real quantities, which is why it has units. The units of any derivative are the units of the top quantity divided by the units of the bottom one, so \(dx/dt\) is in \(\,\mathrm{m/s}\). This is the instantaneous velocity of equation (2.4).

    Watching the limit happen

    There is nothing abstract about this limit; you can watch it happen with a calculator. Let an object’s position be \(x(t) = (5.0\,\mathrm{m/s^2})\,t^2\), and ask for its velocity at \(t = 2.0\,\mathrm{s}\), where \(x = 20\,\mathrm{m}\). Compute the average velocity from \(t = 2.0\,\mathrm{s}\) to \(t = 2.0\,\mathrm{s} + \Delta t\) for smaller and smaller \(\Delta t\):

    Average velocity over shrinking time intervals
    \(\Delta t\) (s)\(x\) at \(2+\Delta t\) (m)\(\Delta x\) (m)\(\Delta x/\Delta t\) (m/s)
    \(1\)\(45\)\(25\)\(25\)
    \(0.1\)\(22.05\)\(2.05\)\(20.5\)
    \(0.01\)\(20.2005\)\(0.2005\)\(20.05\)
    \(0.001\)\(20.020005\)\(0.020005\)\(20.005\)

    The averages close in on \(20\,\mathrm{m/s}\). Algebra shows why. For any \(t\),

    \[\frac{\Delta x}{\Delta t} = \frac{5(t+\Delta t)^2 - 5t^2}{\Delta t} = \frac{10\,t\,\Delta t + 5(\Delta t)^2}{\Delta t} = 10\,t + 5\,\Delta t .\]

    As \(\Delta t \to 0\) the last term disappears, leaving \(dx/dt = 10\,t\), which is \(20\,\mathrm{m/s}\) at \(t = 2.0\,\mathrm{s}\). The leftover \(5\,\Delta t\) is exactly the error in the table: half a meter per second when \(\Delta t = 0.1\), a twentieth of that when \(\Delta t = 0.01\).

    What the slope tells you

    Because a derivative is a slope, its sign and size can be read straight off a graph:

    • Where the graph rises, the slope is positive and the quantity is increasing.
    • Where the graph falls, the slope is negative and the quantity is decreasing.
    • Where the graph is momentarily flat, at a peak or a valley, the slope is zero. This is how physics finds a maximum or a minimum: the top of a thrown ball’s flight is the instant its height stops increasing, \(dy/dt = 0\).
    • Where the graph is steep, the quantity is changing quickly; where it is shallow, slowly.

    Chapter 2 uses exactly this reasoning to read velocity off a position graph and acceleration off a velocity graph (Figure 2.3).

    A derivative is any rate

    Nothing in the definition requires \(x\) to be a position or \(t\) to be a time. Any quantity that depends on another has a rate of change with respect to it. The derivatives you will meet in this book include:

    Rates of change used in this book
    RateMeaningWhere
    \(v = dx/dt\)how fast position changesEq. (2.4)
    \(a = dv/dt\)how fast velocity changesEq. (2.6)
    \(P = dW/dt\)how fast work is doneEq. (7.9)
    \(\vec{F}_{\rm net} = d\vec{p}/dt\)how fast momentum changesEq. (9.3)
    \(I = dQ/dt\)how fast charge flows past a pointEq. (20.1)
    \(E_x = -\partial V/\partial x\)how fast potential changes with positionEq. (18.16)
    \(\mathcal{E} = -d\Phi_B/dt\)how fast magnetic flux changesEq. (24.3)

    The electric field entry is a rate with respect to distance rather than time; the curly \(\partial\) only signals that \(V\) depends on more than one coordinate and we are letting just one of them change. The idea is the same in every row: a small change in one thing divided by the small change in another.

    A few derivatives worth knowing

    You can always find a derivative by computing \(\Delta x/\Delta t\) and shrinking \(\Delta t\), as we did above. In practice, the results for a handful of functions cover nearly everything in this book. Here \(C\) and \(n\) are constants and \(u\) is the variable.

    Derivatives of common functions
    FunctionDerivative with respect to \(u\)
    \(C\) (a constant)\(0\)
    \(u^n\)\(n\,u^{n-1}\)
    \(\sin(ku)\)\(k\cos(ku)\)
    \(\cos(ku)\)\(-k\sin(ku)\)
    \(e^{ku}\)\(k\,e^{ku}\)
    \(\ln u\)\(1/u\)
    \(C\,f(u)\)\(C\,\mathrm{d}f/\mathrm{d}u\)
    \(f(u) + g(u)\)\(\mathrm{d}f/\mathrm{d}u + \mathrm{d}g/\mathrm{d}u\)

    The trigonometric rules hold only when angles are in radians, one more reason physics measures angles that way (Chapter 10). When a function sits inside another, as in \(\sin(ku)\) or \(e^{ku}\), the derivative picks up the rate of the inside function as a factor: here, the \(k\). That is the chain rule: the rates multiply.

    Example D.1: The top of the flight

    A ball is thrown straight up with initial speed \(v_0 = 14.7\,\mathrm{m/s}\). Its height is \(y(t) = v_0\,t - \tfrac{1}{2} g\,t^2\), with \(g = 9.80\,\mathrm{m/s^2}\). Find its velocity and acceleration as functions of time, and the greatest height it reaches.

    Solution

    Differentiate term by term. The derivative of \(t\) is \(1\) and the derivative of \(t^2\) is \(2t\), so

    \[v = \frac{\mathrm{d}y}{\mathrm{d}t} = v_0 - g\,t, \qquad a = \frac{\mathrm{d}v}{\mathrm{d}t} = -g.\]

    The acceleration is constant: free fall. The ball is highest where the height graph is flat, where \(v = 0\):

    \[t_{\rm top} = \frac{v_0}{g} = \frac{14.7\,\mathrm{m/s}}{9.80\,\mathrm{m/s^2}} = 1.50\,\mathrm{s}, \qquad y_{\rm max} = (14.7)(1.50) - \tfrac{1}{2}(9.80)(1.50)^2 = 11.0\,\mathrm{m}.\]

    Check: before \(t_{\rm top}\), \(v > 0\) and the ball rises; after it, \(v < 0\) and the ball falls. The slope changes sign at the peak, exactly as it should.

    Checkpoint D.1

    A position–time graph is a straight line sloping downward. What can you say about the object’s velocity? What about its acceleration?

    Answers to Checkpoints

    Checkpoint D.1. The slope is constant and negative, so the velocity is constant and negative: the object moves in the \(-x\) direction at a steady speed. Since the velocity does not change, the acceleration is zero.


    This page titled D.1: The Derivative: Slope as a Rate of Change was last modified on Thu, 12 Nov 2026 04:27:11 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.