42.2: Free-Electron Theory of Metals

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    42.2: Free-Electron Theory of Metals

    The simplest model of a metal takes the metallic bond at face value. Each atom contributes its valence electrons to a common pool, and those electrons move freely throughout the solid, confined only by its surfaces. The metal is then a three-dimensional box full of electrons: exactly the three-dimensional infinite well of Chapter 40. This free-electron model ignores the forces of the ions and of the other electrons, which seems a drastic simplification, but it works surprisingly well.

    For a cube of side \(L\), the allowed energies are

    \[E = \frac{h^2}{8mL^2}\left(n_x^2 + n_y^2 + n_z^2\right),\]

    with each quantum number a positive integer. A piece of metal holds an enormous number of electrons, about \(10^{23}\) in a cubic centimeter of copper, and the Pauli exclusion principle allows only two of them (one of each spin) in each state \((n_x, n_y, n_z)\). So at absolute zero the electrons cannot all sit in the ground state. They fill the states from the bottom up, two per state, until every electron is placed. The energy of the highest filled state at \(T = 0\) is the Fermi energy \(E_F\).

    To find it, picture each state as a point \((n_x, n_y, n_z)\) in a three-dimensional “number space.” The states with energy less than \(E\) are the points within a distance \(R = \sqrt{8mL^2E/h^2}\) of the origin, in the octant where all three numbers are positive. There is one point per unit volume of number space, and two electrons per point, so the number of electrons with energy below \(E\) is

    \[N = 2\times\frac18\times\frac43\pi R^3 = \frac{\pi}{3}\left(\frac{8mL^2E}{h^2}\right)^{3/2}.\]

    Setting \(E = E_F\), dividing by the volume \(V = L^3\), and solving for \(E_F\) gives a result that depends only on the number of free electrons per unit volume, \(n = N/V\):

    Key Equation: Fermi energy of a metal

    \[E_F = \frac{h^2}{2m}\left(\frac{3n}{8\pi}\right)^{2/3}. \tag{42.3}\]

    The size of the box has dropped out, as it should: a large piece of copper and a small piece have the same Fermi energy.

    Example 42.3: The electrons in copper

    Copper has one free electron per atom, so \(n = 8.49\times 10^{28}\,\mathrm{m^{-3}}\) (the same value we used for drift speed in Chapter 20). Find (a) the Fermi energy, (b) the speed of an electron with that kinetic energy, the Fermi speed, and (c) the temperature at which \(k_BT\) would equal \(E_F\), the Fermi temperature.

    Solution

    (a) The two factors are

    \[\frac{h^2}{2m} = \frac{(6.626\times10^{-34})^2}{2(9.109\times10^{-31})} = 2.410\times 10^{-37}\,\mathrm{J\cdot m^2},\]

    \[\left(\frac{3n}{8\pi}\right)^{2/3} = \left(1.013\times10^{28}\,\mathrm{m^{-3}}\right)^{2/3} = 4.68\times 10^{18}\,\mathrm{m^{-2}},\]

    so

    \[E_F = (2.410\times10^{-37})(4.68\times10^{18}) = 1.13\times 10^{-18}\,\mathrm{J} = \boxed{7.0\,\mathrm{eV}}.\]

    (b) Setting \(\tfrac12 mv_F^2 = E_F\),

    \[v_F = \sqrt{\frac{2E_F}{m}} = \sqrt{\frac{2(1.13\times10^{-18})}{9.109\times10^{-31}}} = \boxed{1.6\times 10^{6}\,\mathrm{m/s}},\]

    about half a percent of the speed of light.

    (c) \[T_F = \frac{E_F}{k_B} = \frac{7.0\,\mathrm{eV}}{8.617\times10^{-5}\,\mathrm{eV/K}} = \boxed{8.2\times 10^{4}\,\mathrm{K}}.\]

    These numbers are startling. Even at absolute zero, the most energetic electrons in copper move at \(1.6\times 10^{6}\,\mathrm{m/s}\): the random speed “of order \(10^{6}\,\mathrm{m/s}\)” quoted in Chapter 20. A classical gas would need a temperature of \(80000\,\mathrm{K}\), hotter than the surface of any ordinary star, for its particles to carry this much energy. The electrons move this fast not because they are hot but because the exclusion principle forces them to stack up into high-energy states.

    Checkpoint 42.2

    Sodium, like copper, has one free electron per atom, but its atoms are farther apart: \(n = 2.65\times 10^{28}\,\mathrm{m^{-3}}\). Is sodium’s Fermi energy larger or smaller than copper’s? By roughly what factor?

    Answer

    The Fermi–Dirac distribution. At absolute zero every state below \(E_F\) is filled and every state above it is empty. At a temperature \(T\), thermal energy can lift some electrons into higher states, but only by amounts of order \(k_BT\), which at room temperature is \(0.026\,\mathrm{eV}\). An electron deep below \(E_F\) cannot be excited by so little, because every state within reach is already occupied and the exclusion principle forbids it to move there. Only electrons within a few \(k_BT\) of the top can find empty states to move into. The probability that a state of energy \(E\) is occupied is given by the Fermi–Dirac distribution:

    Key Equation: Fermi–Dirac occupation probability

    \[f(E) = \frac{1}{e^{(E - E_F)/k_BT} + 1}. \tag{42.4}\]

    Well below \(E_F\) the exponential is tiny and \(f \approx 1\); well above it the exponential is huge and \(f \approx 0\); and at \(E = E_F\) exactly, \(f = \tfrac12\). As Figure 42.2 shows, a rise in temperature merely rounds off the corner of the \(T = 0\) step over a width of a few \(k_BT\).

    A graph of the occupation probability f of E against energy E.
    Figure 42.2. The Fermi–Dirac distribution. At \(T = 0\) (dashed) every state below the Fermi energy is filled and every state above it is empty. At a higher temperature (solid) the edge is smeared over a few \(k_BT\), but \(f(E_F) = \tfrac12\) always. At room temperature \(k_BT\) is only about \(0.4\%\) of copper’s Fermi energy, so on this scale the real smearing would be narrower still.
    Figure descriptionA graph of the occupation probability f of E against energy E. At absolute zero, drawn as a dashed blue line, f equals 1 for all energies below the Fermi energy E sub F and drops vertically to 0 at E sub F, a sharp step. At a temperature T above zero, drawn as a solid red curve, the step is rounded: f stays near 1 well below E sub F, passes through one half exactly at E sub F, and falls smoothly to near 0 a little above it. A bracket shows that the rounding spans a few k sub B T. Only electrons in this narrow region near E sub F are disturbed by heating.

    This resolves a puzzle that troubled physicists for decades. Classically, every free electron in a metal should share in the thermal energy, adding \(\tfrac32 k_B\) apiece to the heat capacity. Measurements show the electrons contribute almost nothing at room temperature. The Fermi–Dirac distribution explains why: only the small fraction of electrons within about \(k_BT\) of \(E_F\), roughly \(k_BT/E_F \approx 0.4\%\) in copper, can absorb thermal energy at all. The rest are locked in place by the exclusion principle, just as the vibrations of nitrogen are locked by the size of their quantum step.

    Checkpoint 42.3

    For a metal at \(300\,\mathrm{K}\) (\(k_BT = 0.0259\,\mathrm{eV}\)), find the probability that a state is occupied (a) at \(E = E_F\) and (b) at \(E = E_F - 0.20\,\mathrm{eV}\).

    Answer

    Answers to Checkpoints

    Checkpoint 42.2. Smaller. The Fermi energy goes as \(n^{2/3}\), so the ratio of sodium’s Fermi energy to copper’s is \((2.65/8.49)^{2/3} = (0.312)^{2/3} \approx 0.46\). Sodium’s Fermi energy is about \(0.46\times7.0\,\mathrm{eV} \approx 3.2\,\mathrm{eV}\), less than half of copper’s. With the electrons spread more thinly, they need not be stacked so high.

    Checkpoint 42.3. (a) At \(E = E_F\) the exponent is zero, so \(f = 1/(1 + 1) = \tfrac12\), at any temperature. (b) \((E - E_F)/k_BT = -0.20/0.0259 = -7.7\), so \(f = 1/(e^{-7.7} + 1) = 1/(1.00045) \approx 0.9995\). A state just \(0.2\,\mathrm{eV}\) below the Fermi energy is empty only about \(0.05\%\) of the time.


    This page titled 42.2: Free-Electron Theory of Metals was last modified on Thu, 12 Nov 2026 04:27:07 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.